GEAR GEEK M52 Sleep Relaxation Mini Wireless Earbuds User Manual
- June 22, 2024
- GEAR GEEK
Table of Contents
GEAR GEEK M52 Sleep Relaxation Mini Wireless Earbuds
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- RF Exposure: Meets general RF exposure requirements
- Usage: Portable exposure condition without restriction
Product Usage Instructions
Compliance and Operation
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF Exposure:
The device has been evaluated to meet general RF exposure requirements. It
can be used in portable exposure conditions without restriction.
Frequently Asked Questions (FAQ)
-
Q: Can I modify the device without approval?
A: No, any changes or modifications not approved could void your authority to operate the equipment. -
Q: Is there any restriction on portable exposure conditions?
A: The device can be used in portable exposure conditions without any restrictions as it meets the general RF exposure requirements.
M 52 User’s Manual
Please read the instructions carefully and keep them properly before using the
product.
Wearing method 
Touch position and operation mode
Headset pairing
Take the two earphones out of the charging compartment respectively, and the
two earphones will automatically turn on and pair. When pairing, the red and
blue indicator lights of the left and right earphones will flash alternately.
When the red and blue indicator lights of one earphone will flash alternately,
and the red and blue indicator lights of the other earphone will turn off, it
indicates that the earphones have been paired successfully. Both headphones do
not flash when connected to the phone.
Description of operating functions
- Start up Method 1: Pick up the headset from the charging chamber and start the machine automatically Method 2: Press and hold the headset for 2 seconds to turn it on
- Shutdown Mode 1: Put it into the charging chamber and shut it down automatically Mode 2: Press and hold for 3 seconds to turn off the machine when the machine is turned on
- Music playing Previous: Double click left earphone, Next: Double click on the right earphone, Volume plus: Hit the right earphone three times, Volume reduction: Hit left earphone three times Summon Siri and long press any headset for 2 seconds
- Telephone mode Answer/hang up: Double-click on any headset Reject calls: Click any headset
- Use of single ear connection: take out a headset separately from the charging compartment, the headset will automatically turn on and flash the red and blue lights, turn on the Bluetooth function of the phone, search for”M31″ and click Connect.
- Switch between Chinese and English When Bluetooth is not connected, double-click to switch between Chinese and English. The default is English.
About Charging
- Earphone charging: The earphone is placed into the charging bay, the earphone charging light is steady red, and the L/R indicator light of the charging bay is blinking. Tip: When the battery capacity of the charging bin is lower than 5%, the digital display screen of the charging bin lights up and flashes. In order to keep the device working normally, please charge the charging bin as soon as possible.
- Earphone fully charged: After the earphone is fully charged, the earphone charging indicator light is red and the digital display screen of the charging bin is
- Charging bin Charge the earphone: the earphone is placed into the charging bin, the number of the charging bin lights up, and the L/R indicator light flashes. Charging bin: Insert the Type-C charging cable into the Type-C charging port of the charging bin, the number at the end of the digital display screen of the charging bin flashes, and the fully charged display is 100. Volume display: IOS system synchronous display, Android system can increase or decrease the volume but the phone does not display.
- Headset power display: The upper right corner of the phone can display the headset real power. Earphone low battery warning: When the earphone battery voltage is below 3.3V, it will prompt you every 5 minutes until the earphone is turned off
Product Desceiption
- Product model: M52
- Bluetooth version: V5.3
- Support protocol: BR+EDR+BLE
- Working voltage: 3.1V-4.2V
- Charging voltage: 5V-1A
- Headset battery capacity: 30mAh
- Storage box battery capacity: 200mAh
- Transmission distance: 10m
- Talk time: 4 hours
- Playback time: 4 hours
- Charging duration of headset: 1-1.5 hours
- Charging time of storage box: 1-2 hours
- Support system: all Bluetooth functional devices and mobile phones
- Package list: charging chamber 1, earphone: L R, data cable 1,
- instruction manual * 1
Common problem
-
Q: Can’t charge the charging chamber?
A: Please try to replace a data cable, or check whether the interface is connected properly. -
Q: Does the headset charge?
A: Confirm that the charging chamber is powered, hold the headset for several times, and press the headset with your hand to make the charging contact fully contacted. -
Q: The headset signal is unstable or the headset has no sound?
A: Please wear the headset in the correct way. No partition or obstacle is allowed during use. Please put the phone in the front pocket as much as possible when using outdoors. -
Q: Two “M52” pairing names appear when searching Bluetooth?
A: You need to delete the two pairing names on the mobile phone device, take them out of the charging bin and reconnect them, and then connect the mobile phone -
Q: Is the voice of answering the phone low or unclear?
A: Please try to turn the volume of the headset or mobile phone to the maximum, and the mobile phone should not be too far away from the headset. -
Q: How to connect two earphones to two mobile phones?
A: Take a headset out of the charging bin, automatically turn on the phone and the red and blue lights flash, then turn on the mobile phone Bluetooth search M52 connection (successful connection: no flashing). After the first headset is successfully connected to the first phone, turn on the second headset to connect to the second phone. -
Q: Earphones do not charge
A: The earphone charging copper column or charging bin charging thimble is dirty, clean with alcohol or detergent
matters needing attention
- Please use this product in an effective environment (10 meters unobstructed). If it exceeds the effective distance, it may be stuck and disconnected.Please use it correctly according to the instructions.
- When charging the charging cabin, a 5V/1A charger should be used. Do not use a fast charger or other chargers with a voltage higher than 5V.
- Please keep away from high-frequency transmitting devices such as WIFI and router as far as possible to avoid affecting the Bluetooth signal reception.
- Do not remove or modify the headset for any reason, and do not let the headset contact corrosive liquid, otherwise it may lead to headset failure and burning, which are not covered by the warranty.
- Do not use this equipment in thunderstorm weather. Thunderstorms may cause abnormal operation of the equipment and increase the risk of electric shock.
- Please avoid using this device near the eyes of children or animals.
- Do not use the equipment in an environment where the temperature is too high or too low (below o C and above 45°°C).
Warning! This product contains a built-in lithium battery. Please do not expose this product to strong sunlight, fire or throw it into the fire to avoid explosion. If the battery is not replaced properly, there will be an explosion hazard.Only the same type or equivalent type of battery can be used for replacement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning : changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
The devices has been evaluated to meet general RF exposure requirement， the
device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>