Airtech Studios M4X Advance TDC Top Down Center Trolley Instruction Manual

June 22, 2024
Airtech Studios

Airtech-logo

Airtech Studios M4X Advance TDC Top Down Center Trolley

Airtech-Studios-M4X-Advance-TDC-Top-Down-Center-Trolley-product-
image

Product Information

Specifications :

  • Product Name: Advanced Inner Barrel Stabilizing O-Ring
  • Compatible with: Maxx Model Rotary Chamber (New Gen. All)
  • Manufacturer: Airtech Studios
  • Components: TDC Advanced Trolley, M-nub x 2

Product Usage Instructions

Installation Steps:

  1. Install the RHOP patch or RHOP bucking into the inner barrel.
  2. Insert the barrel setup into the Maxx Model hop-up chamber after applying silicone grease around the bucking for easy insertion.
  3. Install the Maxx C-clip to center the inner barrel.
  4. Prepare the M-nub by removing the adhesive sticker and applying silicone grease.
  5. Place the M-nub into the hop-up window inside the chamber, ensuring it covers the part of the bucking directly above the RHOP patch.
  6. Apply silicone grease to the underside of the TDC Trolley and install it along with the mini spring.
  7. Reinstall the Original Maxx Adjustment Arm, pin, and mini grub screw to complete the installation.
  8. Set the dial to neutral zero hop position and check for proper alignment inside the inner barrel.

Frequently Asked Questions (FAQ):

  • Q: What brands of RHOP patch or bucking are recommended for use with this product?
    A: Reputable brands like Psionic, Elvish, Silent Sniper, Tru-hop, Maple Leaf Macaron, Prometheus, and Modify are recommended for optimal performance.

  • Q: How can I contact technical support if I encounter any issues during installation?
    A: You can reach out to our technical support team via email at info@airtechstudios.com. Please provide detailed information about the problem you are facing for assistance.

Installation Manual
Advanced Inner Barrel Stabilizing O-Ring for: Maxx Model Rotary Chamber (New Gen.  All)

INSTALLATION STEPS

Step by Step Installation – Please Follow Each Step Precisely

  • D1. Install the RHOP patch into the Inner barrel. Some reputable brands includes Psionic, Elvish and Silent Sniper that are good for performance and offers many sizes for different barrel brands and models. Alternatively, at this stage you can install a RHOP bucking. Brands like Tru-hop and Maple Leaf Macaron are recommended.

  • D2. Insert the bucking – ensure this is a mound less bucking. Brands like Prometheus and Modify offers such buckings. 

  • D3. Insert the barrel set up in the Maxx Model hop-up chamber. Apply some silicone grease on around the bucking so it can slide in easily.

  • D4. Install the Maxx C-clip. This will keep your inner barrel centered.

  • D5. Take one of the M-nubs provided in the kit. And peel the 3m adhesive sticker off the top.

  • D6. Apply silicone grease all around the M-nub. Sides and bottom.

    • Do not apply on the adhesive top side.
  • D7. Place the M-nub into the hop-up window inside the chamber

  • D8. Align to ensure it cover the part of the bucking that is directly above the RHOP patch below.

  • D9. Place a dab of silicone grease at the underside of the TDC Trolley where the hole for the mini spring goes (Point A) this will help keep the small spring in place and easier to install. Next place the original mini Maxx spring to the underside.

  • D10. Install the TDC trolley and ensure the mini spring stays vertical also. Apply some grease on the sides where it needs to move up and down to make the operation smoother – this part is optional, but we recommend it.

  • D9. Install back the Original Maxx Adjustment Arm, pin and mini grub screw to complete the installation.

  • D10. Ensure the dial is set to neutral zero hop position and peek inside the inner barrel to see that there’s no mound. If ok, twist the dial a few degrees and look into the inner barrel again and you should see a mound pushing down from above.

  • Great job installing the Advanced TDC Trolley on your Maxx Model Chamber!

  • If you run into any issues during the setup process, please don’t hesitate to reach out to our technical support team using the email provided. We’re here to help you get your Maxx Model dialed in just right. Be sure to provide as much detail as possible about any problems you’re facing, and we’ll work with you to get everything sorted out.

  • Let me know if you have any other questions!
    info@airtechstudios.com

  • Airtech Team

  • www.airtechstudios.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals