La Crosse Technology W88723 Alarm Clock Instruction Manual
- June 22, 2024
- LA CROSSE TECHNOLOGY
Table of Contents
La Crosse Technology W88723 Alarm Clock
OVERVIEW
FRONT VIEW
BACK VIEW
GET STARTED
- Step 1: Insert 5 volt AC power cord into the wall and then into the bottom of the alarm clock.
- Step 2: Insert 2 new AAA Alkaline batteries (not included) into the alarm clock. Observe the correct polarity.
Restart: If there is no indoor temperature data after 60 seconds, unplug the AC adapter and remove batteries from the alarm clock, press any button 20 times. After 15 minutes, return to Step 1 above.
SET TIME & DATE
- Hold the SET button to enter the time set mode.
- Press the + or – buttons to adjust values.
- Press the SET button to confirm adjustments and move to the next item.
TIME SET ORDER:
- Hour
- Minutes
- Year
- Month
- Date
Press the SET button to exit, or wait 20 seconds without pressing buttons to return to the normal time display.
12/24 HOUR TIME FORMAT
- Press the + button to select the 12-hour or 24-hour time format.
FAHRENHEIT/CELSIUS
- Press the – button to select temperature readings in Fahrenheit or Celsius.
ADJUST BACKLIGHT HI/LOW/OFF
- When using A/C power: Press the LIGHT HI/LOW/OFF button to adjust the backlight.
- When using Battery power only: Press the LIGHT HI/LOW/OFF button for a 10-second backlight.
USB CHARGING PORT
- Charge a smart phone, camera or other devices when the alarm clock is plugged into a power outlet with the included 5V AC adapter.
- Connect your external device’s USB charging cable (not included) to the USB charging port.
- Charging times will vary.
- USB Power Output: 1A maximum current. Charge 1A devices or devices that are self-regulating.
NOTE: This is a power-output charging port. It does not supply power to the alarm clock.
NOTE: Some USB cables are for data transfer only and cannot be used for charging. Make sure that the USB cable you use will charge your device. Most USB cables included with mobile devices will work for charging.
SET TIME ALARMS
Setting the alarm and activating the alarms are separate actions.
- Press and release the ALARM button to select Alarm 1 or Alarm 2.
- Hold the ALARM button for 5 seconds to enter alarm time set mode. The alarm hour will flash.
- Press the + or – buttons to adjust the alarm hour.
- Press the ALARM button to confirm and move to the alarm minutes.
- Press the + or – buttons to adjust the alarm minutes.
- Press the ALARM button to confirm and exit. Alarm Time setting order: 1. Hours, 2. Minutes
Note: The alarm is crescendo sound. The alarm will sound for 2 minutes and then shut off completely if no buttons are pressed.
ACTIVATE/DEACTIVATE TIME ALARM
- Press and release the ALARM button to select Alarm 1 or Alarm 2.
- Press the ALARM ON/OFF button to activate the selected alarm. Once activated, the bell icon appears.
- Press the ALARM ON/OFF button again to deactivate the selected alarm. The bell icon will disappear.
SNOOZE (SILENCES ALARM TEMPORARILY)
- When alarm sounds, press the SNOOZE button to silence the alarm for 9 minutes.
- The alarm icon will flash.
- To stop alarm for one day, press any button, while in snooze mode.
- The alarm icon will show solid
TEMPERATURE TREND INDICATORS
The temperature (2°F / 1°C) trend indicators update every 30 minutes or less.
- Temperature has risen in the past 3 hours.
- Temperature has not changed in the past 3 hours.
- Temperature has fallen in the past 3 hours.
MOON PHASE
- The moon phase is based on the Gregorian calendar and the year, month and date set. Most Internet moon phase calculations are based on the lunar calendar.
LOW BATTERY ICON
- View full warranty details online at:When the icon is displayed in the upper right hand corner, replace batteries in the alarm clock.
ALARM CLOCK CARE AND MAINTENANCE
- Do not mix old and new batteries
- Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
- Always purchase the correct size and grade of battery most suitable for intended use.
- Replace all batteries of a set at the same time.
- Clean the battery contacts and also those of the device prior to battery installation.
- Ensure the batteries are installed with correct polarity (+and -).
- Remove batteries from equipment which is not to be used for an extended period of time.
- Remove expired batteries promptly.
- Improper use or unauthorized opening of housing voids warranty.
- If the alarm clock is not working properly, change the batteries and/or check the A/C cord connection.
SPECIFICATIONS
SPECIFICATIONS
Indoor Temperature Range: + 32°F to + 122°F (0°C to 50°C)
Power:
Alarm Clock: 5V A/C power adapter (included)
AC Adapter No: HX06-0501200-AU
Battery backup: 2-AAA, IEC, LR3 batteries (not included)
Battery Life: Battery life is over 12 months when using the AC adapter
for primary power
USB: Output 1 Amp maximum current (charging cable not included)
Dimensions: 5.9″ L x 1.9″ D x 3.5 ” H (150 x 48 x 89 mm)
WARRANTY AND SUPPORT INFORMATION
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support with questions or visit our online help (manuals and FAQS):
- Phone: 1-608-782-1610
- Online Product Support: www.lacrossetechnology.com/support
- Product Registration:www.lacrossetechnology.com/support/register
- View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf
- Warranty Address: La Crosse Technology, Ltd 2830 S. 26th St. La Crosse, WI 54601
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical, or chemical processes without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error or their consequences. All trademarks and patents are recognized.
CANADA STATEMENT
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Model: W88723
www.lacrossetechnology.com/support
FREQUENTLY ASKED QUESTIONS
What are the special features of the La Crosse Technology W88723 Alarm Clock?
The La Crosse Technology W88723 Alarm Clock includes special features such as an alarm, temperature display, humidity display, calendar display, snooze, auto-dimmable display, and a charging port.
How large is the display on the La Crosse Technology W88723 Alarm Clock?
The display of the La Crosse Technology W88723 Alarm Clock measures 5.9 inches in width and 3.5 inches in height.
What power source does the La Crosse Technology W88723 Alarm Clock use?
The La Crosse Technology W88723 Alarm Clock is corded electric, meaning it must be plugged into an electrical outlet to operate.
What are the dimensions of the La Crosse Technology W88723 Alarm Clock?
The dimensions of the La Crosse Technology W88723 Alarm Clock are 5.9 inches in width and 3.5 inches in height.
What type of room is the La Crosse Technology W88723 Alarm Clock suitable for?
The La Crosse Technology W88723 Alarm Clock is designed for use in a bedroom or any room where you need an alarm clock with additional display features like temperature and humidity.
How much does the La Crosse Technology W88723 Alarm Clock weigh?
The La Crosse Technology W88723 Alarm Clock weighs 6.4 ounces.
What is the model number of the La Crosse Technology W88723 Alarm Clock?
The model number of the La Crosse Technology W88723 Alarm Clock is W88723.
What type of warranty does the La Crosse Technology W88723 Alarm Clock come with?
The La Crosse Technology W88723 Alarm Clock comes with a 1-year limited parts and labor warranty.
What kind of watch movement does the La Crosse Technology W88723 Alarm Clock use?
The La Crosse Technology W88723 Alarm Clock uses automatic watch movement.
Why is the display on my La Crosse Technology W88723 Alarm Clock not turning on?
Ensure that the La Crosse Technology W88723 Alarm Clock is properly plugged into a working electrical outlet. Check if the power cord is securely connected. If the problem persists, try replacing the 2 AAA backup batteries.
How can I fix the incorrect time display on my La Crosse Technology W88723 Alarm Clock?
To correct the time on your La Crosse Technology W88723 Alarm Clock, press and hold the Set button until the time starts flashing. Use the up and down buttons to adjust the hours and minutes, then press Set again to confirm.
What should I do if the alarm on my La Crosse Technology W88723 Alarm Clock is not sounding?
Ensure the alarm is set correctly by pressing the Alarm button and verifying the alarm time. Make sure the alarm volume is not set to the lowest setting and that the alarm is activated. Replace the backup batteries if needed.
Why is the temperature reading on my La Crosse Technology W88723 Alarm Clock inaccurate?
Place the La Crosse Technology W88723 Alarm Clock away from direct sunlight, heat sources, or vents, as these can affect temperature readings. If the issue persists, reset the clock by unplugging it, removing the batteries, and reassembling it after a few minutes.
What should I do if the humidity display on my La Crosse Technology W88723 Alarm Clock is incorrect?
Ensure the La Crosse Technology W88723 Alarm Clock is placed in an open area away from moisture sources. If the reading remains inaccurate, try resetting the clock by unplugging it, removing the batteries, and reassembling it after a few minutes.
How can I stop my La Crosse Technology W88723 Alarm Clock from beeping randomly?
Random beeping could indicate low backup batteries or a malfunction. Check and replace the backup batteries. If the beeping persists, perform a reset by unplugging the clock, removing the batteries, and reassembling it after a few minutes.
DOWNLOAD THE PDF LINK:La Crosse Technology W88723 Alarm Clock Instruction Manual
REFERENCE:La Crosse Technology W88723 Alarm Clock Instruction Manual- Device.Report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>