RAWLPLUG FX-N-C-A2 Nylon Hammer In Fixing With Cylinder Head Installation Guide
- June 15, 2024
- RAWLPLUG
Table of Contents
RAWLPLUG FX-N-C-A2 Nylon Hammer In Fixing With Cylinder Head
Product Information
The Lightweight Fixings are hammer-in fixings made from high-quality nylon.
They are designed for fast, simple, and cost-effective installations
.
Specifications
Size| Product Code| Plug Diameter (d)| Plug Length (l)| Fixture Max. Thickness
(t)| Hole Diameter (d)| Nail Length (L)| Nail Diameter (D)
---|---|---|---|---|---|---|---
6| R-FX-N-06C040-A2| 5.9 mm| 40 mm| 11 mm| 7 mm| 44 mm| 3.8 mm
8| R-FX-N-08C060-A2| 7.9 mm| 60 mm| 20 mm| 9 mm| 66 mm| 4.8 mm
8| R-FX-N-08C080-A2| 7.9 mm| 80 mm| 29 mm| 40 mm| 86 mm| 4.8 mm
8| R-FX-N-08C100-A2| 7.9 mm| 100 mm| 40 mm| 100 mm| 106 mm| 4.8 mm
**Installation data
**
Basic performance data
Performance data for single fixing in tension without influence of edge
distance and spacing
Product commercial data
Features and Benefits
- High-quality nylon construction
- Fast and simple installation
- Cost-effective
- Rapid hammer-set installation reduces the time required and allows for cost-effective, high-volume installation.
- The cylinder head prevents the plug from slipping into over-sized holes and allows fixed thin elements
- The combination of the PZ recess and the helical thread makes removal of the nail possible, facilitating disassembly when necessary.
- The extensive range of product lengths, diameters and head types ensures the availability of the correct fixing for every scenario.
- Designed for push-through installation.
Applications
The Lightweight Fixings can be used in various applications, including:
- Concrete
- Clay brick
- Solid brick
- Sand-lime solid brick
- Sand-lime hollow brick
- Lightweight concrete hollow block
- Lightweight concrete block
- Autoclaved aerated concrete
- Timber or metal battens
- Drywall structures
- Skirting / Dado railing
- Cable clamps
- Pipe clamps
Base materials
Approved for use in:
- • Concrete
• Solid Brick
• Solid Sand-lime Brick
• Hollow Sand-lime Brick
• Lightweight Concrete Block
• Hollow Lightweight Concrete Block
• Aerated Concrete Block
Base Materials
The Lightweight Fixings are suitable for use in the following base materials:
- Concrete C12/15
- Concrete C16/20
- Concrete C20/25 – C50/60
- Solid clay brick min 20MPa (eg Mz20/2.0)
- Solid brick min. 30MPa
- Sand-lime solid brick
- Sand-lime hollow brick
- Lightweight concrete hollow block
- Lightweight concrete block
- Autoclaved aerated concrete
Installation Guide
- Drill a hole of the required diameter.
- Insert the Lightweight Fixing plug into the hole through the fixture.
- Hammer the nail into the plastic sleeve until the fixing is secure and flush with the fixture.
FAQ
Q: What are the available sizes and product codes for the Lightweight
Fixings?
The available sizes and product codes for the Lightweight Fixings are as
follows:
- Size 6: Product Code R-FX-N-06C040-A2
- Size 8: Product Code R-FX-N-08C060-A2
- Size 8: Product Code R-FX-N-08C080-A2
- Size 8: Product Code R-FX-N-08C100-A2
Q: What is the recommended load for the Lightweight Fixings?
The recommended load for the Lightweight Fixings varies depending on the
substrate and tension load. Please refer to the performance data table in the
user manual for specific load recommendations.
Q: How many fixings are included in a box, outer, and pallet?
The quantity of fixings included in a box, outer, and pallet are as
follows:
- Box: 100 fixings
- Outer: 1600 fixings
- Pallet: 38400 fixings