ICOMTOFIT M-ONE Environment Noise Cancellation Headset User Manual
- June 21, 2024
- ICOMTOFIT
Table of Contents
ICOMTOFIT M-ONE Environment Noise Cancellation Headset User Manual
What’s in the Box
Package Contents:
A. Headset x 1
B. Charging Case x1
C. Type-C Charging Cablex1
D. Eartips x 6 (Includes one on headset)
E. User Manual x 1
Product Overview
- Multi-Function Button (MFB)
- Volume+
- Volume-
- Mute Button
- LED Indicator
- Noise Reduction Microphone
- Microphone
- Charging Port
- Charging Case Interface
- Digital Power Display of Case
- Case Charging Port
How to Wear?
A proper fit on your head is important for both comfort and optimal sound quality. Here are some guidelines:
-
Reversible wearing style: The M-ONE can be worn on the left or right by flipping the microphone to the other side.
-
Rotate the eartip and adjust the retractable earhook to fit the shape of your ear.
-
Adjust the boom. For better voice capture, it is recommended to position the microphone close to the corner of your mouth.
Basic Operation
LED Indicator
- Power on: LED flashes blue for 1s
- Power off: LED flashes red for 2s then turns off
- Pairing mode: LED flashes blue & red alternately
- Connected: blue light flashes once every 8 seconds •Charging status: Red light on
- Charging complete: LED flashes blue for 5s then turns off
- Low battery: Red light on with a voice prompt
- Reset: LED flashes blue 2 times
— Charging status: White number flashing
— Charging complete: Display the number 100 for 40s then turns off
— Charging headset with the charging case: Blue number display for 8s then
turns off
Voice Prompts
Basic Specifications
Bluetooth Pairing and Connection
A. Getting Paired
NOTE:
1. Power On Automatically
Pick up the headset from the charging case, the headset will automatically
power on.
2. Power On Automatically
Unplug the charging cable of the headset when charging, the headset will
automatically power on.
3. How to reset?
During charging, hold the “MFB” for 5 seconds at the same time, then the LED
Indicator flashs blue 2 times.
B. Pairing with 2 Devices Simultaneously
- Follow the pairing procedure as instructed in part “Getting Paired” to pair the headset with the 1st Bluetooth device.
- Turn off the Bluetooth of your 1st device. The headset will enter pairing mode.
- Repeat the pairing procedure to pair the 2nd Bluetooth device.
- Turn on Bluetooth of your 1st device, click to reconnect to “M-ONE” on the Bluetooth list.
- Turn the headset off and then turn on again. The headset will automatically connect to the 2 devices at the same time.
- Now you can operate two devices through one headset.
Charging the Device
Two ways to Charge the Headset:
A. Charge the Headset Directly
B. Charge the Headset via the Charging Case
FCC Statement
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
The device has evaluated to meet general RF exposure requirement.
The device can be used be in portable exposure without restriction.
IC Caution:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
WARRANTY
If there is any issue with your order, please contact us via email or Facebook with your Amazon order number to active below benefits:
- Lifetime Warranty Extension
- Support refunding or replacing at NO COST for defective products even if Amazon’s one-month return window is closed.
- 24/7 technical support for any issues.
Email:help@ekvanbel.com
Facebook:@EKVANBEL
Need any help?
If there is any issue with your order, please contact below email to ask for
warranty, and you don’t have to return the defective one to amazon.
Email:help@ekvanbel.com
PS: We provide warranty even though the return window was closed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>