FRIGIDAIRE FHWW084TE1 8000 BTU Window Room Air Conditioner User Guide
- June 21, 2024
- Frigidaire
Table of Contents
FRIGIDAIRE FHWW084TE1 8000 BTU Window Room Air Conditioner
Before you start
Only install unit according to the supplied Installation Instructions.
When plugging unit in, always press the RESET button on the Current
Device.
You’re in control
- To Get Started
Press On/Off button. That’s it!
The unit is programmed to start in Eco mode, with auto fan speed and a temperature setting of 72°F. To change the temperature setting press – or + button.
-
In Eco mode (Energy Saver mode), cooling will turn off once the set temperature is reached. Every 10 minutes fan will run so room temperature can be sensed.
-
To Change Mode
Press Mode button to choose the desired mode. -
To Adjust Fan Speed
Press Fan button to increase fan speed.
You may also select Auto Fan, which will speed up or slow down fan speeds automatically based on significant changes in room temperature. -
To Go to Sleep
Press the sleep button. Temperature increases 4°F or 2°C over 1 hour and then holds this elevated setting for 7 hours. -
To Activate Child Lock
Press and hold the Mode button for 3 seconds. In the Child Lock state, the control panel will be locked. Press the Mode button for another 3 seconds to deactivate. -
To Set the Timer
Press the Timer button. Then enter up to 24 hours for automatic turn on or shut off. When unit is On, the value entered is the time that the unit will shut off. When unit is Off, the value entered is the time that the unit will turn on. Press and hold the Timer button for 2 seconds to cancel the timer setting. -
To Change Temperature Unit
Press and hold the – and + buttons together for 3 seconds to change the display temperature unit between °F and °C. -
To Clean the Dust Filter
After 250 hours of use the Dust Filter light will illuminate to remind you to clean dust filter. Press and hold the “Fan” button 5 seconds and the light will go off. -
PureAirTM Premium Allergen Filter (sold separately)
If the PureAirTM Premium Allergen Filter is installed, the PureAirTM Filter light will illuminate white. After 1440 hours of use the light will illuminate red to remind you to replace a new Filter. Press Sleep button for 5 seconds to reset light.
-
Upgrade your AC with a PureAirTM Premium Allergen Filter
Your air conditioner has a reserved space for PureAirTM Premium Allergen
Filter (sold separately).
Enjoy fresher room air with the PureAirTM Filter that captures household dust,
dust mite debris, pet hair, dander, smoke, and other fine particles.
Remember
Your Use & Care Guide has complete descriptions of all these features and more. Please read it carefully and keep in a safe place.
Customers Support
We are here for you
Have a question?
Want help?
Need service?
Scan the QR Code to the right or visit
frigidaire.com •
frigidaire.ca
for owner support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>