ACEMIC Q4 Wireless Microphone User Manual

ACEMIC Q4 Wireless Microphone

Components

Receiver 1
Transmitter 4
(Hand held/ Lavalier/ Skin-color Headset/ Waterproof Headset microphone )
Adaptor 1
Charging cable3
Manual *1

Features

UHF 902-928MHz frequency range(region dependant).
Wireless Digital audio transmission.
Ultra-low audio latency.
48KHz audio sampling frequency.
Digital ID code technology can avoid audio frequency jamming.
Transmitter has these features: Switch channel, adjust volume and set button
lock mode ( button lock only available for handheld rn ic).
Up to 40 meters line-of-sight range.
Suitable for live broadcasts, karaoke, street performances, etc.

Receiver Function

1. 3.5mm stereo output plug

2. 3.5mm to 6.5mm stereo adapter

3. Power button

4. The indicators from left to right indicate:
   A Channel signal indicator
   B Channel signal indicator
   C Channel signal indicator
   D Channel signal indicator
   CHG Charging indicator
   PO Power indicator

5. Antenna

6. Type-C charging port

Handheld Microphone Function

1. Power button/Function settings auxiliary button: Press and hold 1 second to turn on/off, find description in the following “set button” for its auxiliary function.

2. Battery voltage indication

3. Signal indication

4. Channel and Frequency display: Display the current channel and its corresponding frequency (illustrated in Pie 1)
   A equates to channel A, and 661 equates to the frequency 661 MHz. Volume display: Only display when you power on (illustrated in Pie 2) Button lock mode display: Assuming lock mode is on, there will be a Lock On on screen while user turns on the receiver.(illustrated in Pie 3)

5. Set button
   Channel switching: Long press for 2 seconds to do a loop switch in order of A/B/ CID channels. Volume adjustment: Short press set button till the screen appears(illustrated in Pie 2), then short press it again to adjust volume.
   It will exit the volume adjustment mode automatically if there is no further operation for 5 seconds, you can also short press power button to exit at once.
   Button lock settings: Press and hold the set button and power button together for 3 seconds till the screen (illustrated in Pie 3) appears, then the set button is being locked.
   Note : Locked means blocking the function of channel switching and volume adjustment on the set button. To restore 1he above two functions, just do 1he same work again until you see Pie 4.
   

Lava lier f Headset Microphone Function

1. Condenser capsule

2. Channel indicator/Battery low voltage indicator and volume adjustment indicator CH A: blue light/ CH B: red light/ CH C: yellow light/ CH D: green light Volume adjustment indicator: The channel indicator acts as a volume indicator during volume adjustment.
   When powering on, the channel indicator flashes first, indicating the currently saved volume level, and then lights up continuously. When the battery is low, the corresponding channel indicator flashes at a frequency of 0.5 seconds.

3. Set button
   A/B/C/D channel switching: Press and hold the set button for 2 seconds to do a loop switch in order of A/B/C/D channels.
   Volume adjustment: The current volume level will display when the device is turned on. The number of flashes of the channel indicator when it is turned on corresponds to its volume level (6 levels adjustable).
   Each short press of the set button changes the volume level (incremental cycle). The number of flashes of the channel indicator during volume adjustment corresponds to the currently set volume level.

4. Charging indicator
   The indicator light is always on when the battery is charging, and turns off when the battery is fully charged.

5. Power button/Function settings auxiliary button

6. Body-pack clip

7. Antenna

Operating Guide

Switch
long press power button for 1 second lo turn on or off.

Transmitter A I B / CID channel switchIng
Press and hold the sel button for 2 seconds do a loop switch in order of AIB/CID channels.

Frequency adjustment
Transmitters are fixed frequencies, the receiver will pair with them automatically, no need to adjust Frequency.

Volume adjustment
Please refer to the description in the “Set Button• for the handheld microphone and lavalier function.

Button lock mode settings
This feature is only for hand held microphone. Please refer to the description in the Handheld Microphone Function• Button lock settings ·.

Charging
Receiver is powered by built-in lithium battery, battery capacity is 2000mAh. When 1he receiver battery is low, the power blue indicator Rashes at a frequency of 0.5 seconds,please charge ii in time. Red indicator is always on when ii is charging. Charging time is about 3-4 hours, the red indicator will turn off when it’s fully charged.

Product Specification

Receiver

Handheld Microphone

Skin-color Headset Microphone

Lavalier Microphone

Waterproof Headset Microphone

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>