Sunco DL_BFWR56-13W-27K_5K 6 LED Retrofit Selectable Baffle Downlight User Manual

Sunco DL_BFWR56-13W-27K_5K 6 LED Retrofit Selectable Baffle Downlight

Specifications

• Voltage: 120V
• Wattage: 13W
• Wattage Equivalency: N/A
• Beam Angle: N/A
• Weight: N/A
• Housing Material: N/A
• Dimmable: Yes
• Model: DL_BFWR56-13W-27K_5K
• Recommended Dimmers Brand: LUTRON, Cloudy Bay, Amazon Basics
• Average Lifetime: 50000 hrs
• Lumens: 1050LM
• Moisture Rating: Damp
• CRI: 80+
• Usage: Indoor
• IC Rated: Yes
• Warranty: 7 Years

Whats in the Box

Retrofit Downlight

Before You Start

Safety Information
To reduce the risk of fire, electric shock, or physical injury:

• Turn off the circuit breaker before installing this fixture.
• This product should be installed by a person familiar with the construction and operation of the product the hazards involved. Safety eyeglasses and gloves are recommended.
• Abide by related regional and local laws or regulations.
• Proper grounding is required to ensure safety.
• Do not alter, relocate, or remove wiring during installation.
• Do not make or alter any open holes in the wiring enclosure or electrical components during installation.
• Check for shipping damage before installing. If the product is damaged, do not use it.
• Keep fixture away from corrosive substances
• Suitable for damp locations at temperature ranging from -4°F to 104°F. Not for use where directly exposed to water.
• Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
• Use safety precautions and abide by regional and local laws or regulations.
• This product is not compatible with 3rd party sensors.
• This product is not compatible with photo controls.
• This product is not compatible with occupancy sensors.
• This product is not compatible with timing devices.

WARNING: Cancer & Reproductive Harm- www.P65Warnings.ca.gov

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference that may cause undesired operation. Please review all instructions carefully before installation.

Step 1
Locate the recessed housing.
Step 2
Determine the type of connector available.
Step 3
Connect the adapter to make the connection.
Step 4
Push the downlight into the can until secure.

Installation Guide

STEP 1

• a. Turn off the circuit breaker before installation.
• b. Locate the housing.
  NOTE : Remove the previous fixture. The fixture may be hot so allow time to cool after turning off the power.

STEP 2
Secure the clip springs firmly within the retrofit connector.
(Important: When inserting the spring, gently press down. If the spring does not lock in easily, try turning it around.)

STEP 3
Determine the type of connector available.
-TP24 Connector(1) -E26 Base(2)

STEP 4

• a. Connect the appropriate adapter to make a connection in the housing.
  NOTE : The wires may come loose from the connectors so ensure they are attached.

• b. Tuck all wires into the can.

STEP 5

• a. On the back of the retrofit fixture, slide the CCT Selection Switch to choose from five colour temperatures. Try each CCT to determine the best fit.
• b. Turn off the light switch after selecting your choice and continue installing.

STEP 6

• a. Line up the trim ring with the opening.
• b. Push the downlight into the can until secure. Compression clips will hold retrofit light in place. Push-up springs into can clips.
• c. Turn on the circuit breaker and test light.

Product Details

Recommended Dimmers

Specifications

• Voltage: 120V
• Wattage: 13W
• Wattage Equivalency: 120W
• Beam Angle: 90°
• Weight: 0.3lbs
• Housing Material: PC
• Dimmable: Yes

Common Troubleshooting

• Feeling in the dark about an issue with your product? No worries! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.
• If you still need some assistance, please feel free to contact us with any questions. Our team of lighting experts are happy to help brighten your day

Light Distribution Angle

Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area. There are two main types of lighting distribution angles:

Asymmetric lighting distribution emits light evenly in all directions, creating a cone-shaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter lighting. Symmetric lighting is also used to a certain degree in up-lighting.

• An asymmetric lighting distribution angle, also known as a beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spill in other areas.
• Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more.
• It is important to note that the lighting distribution angle can also be affected by other factors such as the reflector design of the light source, the type of lens used, and the distance between the light source and the surface being illuminated.

Customer Support

Warranty Policy
This product is covered by our industry-leading 7-year warranty.
It gets even better – scan the QR code for 2 extra years of protection!

30-Day Return Policy
At Sunco, we value our customers and stand by the quality and performance of our products.
If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.

Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your needs! Contact us at:

Email: support@sunco.com
Call or Text: 844-334-9938

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>