Sunshine SOLAR V2A Hanger Bolts Height Adjustable For Photovoltaic Solar Mounting Installation Guide
- June 21, 2024
- Sunshine SOLAR
Table of Contents
V2A Hanger Bolts Height Adjustable For Photovoltaic Solar Mounting
Roof Bracket Hanger Bolt Installation Guide
Components List:
Installation Steps
Determine the position of the Roof Anchors according to your design.
L1: Distance between rails is about 0.6 * panel length.
L2: Distance between L roof clamps is about1000mm.
1. Install the Hanger Bolt on the roof.
Fix the L roof clamps to the hanger bolts.
2. Connecting two rails with the the rail splice kit.
An expansion gap at the rail joints is suggested. Leave a little gap between
two rails.
3. Install the rail on the L roof clamp with the bolt
and nut.
4. Place the first solar panel of the bottom row. Slide the end
clamp tightly against the solar panel and fasten it. Fix the solar panel with
the end clamps and mid clamps.
5. Finished.
Installation of nut
Registered office:
Sunshine Solar Limited
Unit 30, Ashwellthorpe Industrial Estate
Ashwellthorpe
Norwich
Norfolk
NR16 1ER
tel. +44 (0)1508 488188
email. support@sunshinesolar.co.uk
web. www.sunshinesolar.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>