LED SOLUTION 602 Perfect Shape Cool Daylight 20 Watt Led Tube Light Instruction Manual
- June 19, 2024
- LED Solution
Table of Contents
Manual LED tube Premium
602 Perfect Shape Cool Daylight 20 Watt Led Tube Light
Model| Product code| Dimension L1 (mm)| Dimension L2 (mm)| Input voltage AC
(V) 50 – 60 Hz| Power (W)| Color temperature (K)| Luminous flux (lm)| Beam
Angle| Lifetime (h)| Operating humidity (%)| Working temperature (°C)
---|---|---|---|---|---|---|---|---|---|---|---
LED tube 60cm 10W 160lm/W Premium| 191326| 588| 602| 100 – 240| 10| 4000-4500|
1400| 120°| up to 50.000| 30-60%| -20~+48°C
LED tube 120cm 18W 160lm/W Premium| 191327| 1198| 1212| 100 – 240| 18|
3000-3500| 2830| 120°| up to 50.000| 30-60%| -20~+48°C
LED tube 120cm 18W 160lm/W Premium| 191328| 1198| 1212| 100 – 240| 18|
4000-4500| 2880| 120°| up to 50.000| 30-60%| -20~+48°C
LED tube 120cm 18W 160lm/W Premium| 191329| 1198| 1212| 100 – 240| 18|
6000-6500| 2930| 120°| up to 50.000| 30-60%| -20~+48°C
LED tube 150cm 24W 160lm/W Premium| 191330| 1498| 1512| 100 – 240| 24|
4000-4500| 3840| 120°| up to 50.000| 30-60%| -20~+48°C
Important safety information
Please read this manual carefully before using the product and keep it for
future reference.
For damage caused by improper use or changes in the product structure, LED
Solution s.r.o. bears no responsibility.
Before handling the product in any way, make sure that the power supply is
switched off.
All activities performed on electrical equipment must only be performed by a
person with electrical technical qualifications.
Follow the wiring diagrams shown for safety.
The product is not dimmable. The product is intended for connection with the
G13 socket standard.
The product is intended only for use in a dry environment or in a light
fixture that provides protection against moisture. The product meets IP20
protection class.
Observe the voltage range of AC 100-240 V / 50-60 Hz. When the diffuser or
lamp is damaged, disconnect it from the mains and do not use it.
Moistened cotton is best for cleaning the product. Do not use solvents,
thinners or alcohol for cleaning.
Protect the product from solid and other particles settling on the lamp.
Replacement fluorescent tube with choke
Turn off the power supply.
Remove the original fluorescent starter and tube.
Replace them with the included LED starter and LED tube.
Connecting a separate LED tube
Turn off the power supply.
Connect the wires marked “L” and “N” POWER INPUT to the AC supply.
!!! Be sure to feed the tube from the right side, if you feed the light from
the other side, there will be a short circuit, the jumper will burn and the
light will be damaged !!!
V. 1.0.0
Producer
LED Solution s.r.o.,
Dr. Milady Horakove185/66, Liberec 460 07, Czech Republic
www.ledsolution.cz
[email protected]