Vogels MA-3010 Series Tilting TV Wall Mount Installation Guide

Vogels MA-3010 Series Tilting TV Wall Mount Installation Guide

Full Installation Guide

Everything you need to get your TV safely on the wall, in no time

Before you start

we just wanted to say thanks for choosing Vogel’s. Smart choice.
And you’re already making another smart choice – reading the manual! Keep reading to learn all about safe, efficient installation, and how to use your new mount.

Stay safe

Warning

Always read these safety instructions carefully before installing and using this product.
Following these instructions is strictly required. Incorrect mounting and/or installation could put you, your TV, and your family at substantial risk.
Vogel’s recommends that the mounting and/or installation of this product should be carried out by a suitably qualified expert.
Vogel’s cannot be held responsible for any injury and/or damage caused by incorrect installation.
Please consult the manual for your TV and ensure that the weight and size of the TV is within the maximum weight and size
limits specified for this product, and that the TV mounting bolts used are of a suitable length and diameter. Note that not all the TV mounting accessories provided are required for the installation of any one TV.
The wall mounting accessories provided are exclusively intended for installation on walls made of solid brick, solid concrete or solid wood columns.
Any material covering the wall must not exceed 3 mm/ 0.12 inch
For mounting on walls made of other materials, such as hollow bricks, wood panels or plasterboard, please consult your installer and/or specialist supplier.
Clean the product with a dry, lint-free cloth. Do not use detergents or other solvents to clean the product.
Only qualified, certified personnel may repair the product. Use only original spare parts. The use of other parts will result in voiding the warranty, and could lead to injuries.
Alterations to the product and technical modifications are not permitted. This will void the warranty, and could lead to injuries.
Always store the product in a dry and safe place with a temperature between -10°C to +50°C.
Handle and transport the product with care.
Repack the product when transporting or not using it for a longer period of time.
Lifting your TV is a two-person job. Don’t be bold!

What’s in your box?

Something missing? Make sure your packaging has everything in place:

1. Wall mount
2. Strips
3. Instructions
4. Bolts for fastening strips on TV
5. M6 bolts
6. M8 bolts
7. Spacers
8. Washers
9. Fischer© Plugs (fischer© DuoPower)
10. Bolts

Got your tools ready?

Don’t start without all the necessary tools:
Crosshead screwdriver or crosshead attachment for electric screwdriver
Drilling machine with screwdriver function
No. 8 wrench
For walls with wooden studs: 3mm or 1/9” wood drill
For walls with wooden studs: Stud finder
For concrete/brick walls: 8mm or 5/16” concrete / brick drill
No. 10 socket wrench or socket attachment
Pencil
Spirit level or spirit level app

Take care of your safety

Who cares about looking cool? Always wear personal protective equipment:
Eye protection
Ear protection
Safety shoes

Additional tools

Let our video guide you

No more stress. Watch and learn, with our handy online installation video.

Additional tools

Let our video guide you

No more stress. Watch and learn, with our handy online installation video.

1. Tilt the hooks away from the strips Ⓑ in case you want to mount your TV in a tilted

2. Tighten the hooks using a screwdriver and number 8
   

3. Carefully put the TV on a clean surface without

4. Screw the strips Ⓑ on to the TV using the bolts for fastening strips on TV Ⓓ.

Use washers Ⓕ and spacers Ⓔ to adjust for any high areas on the back of the TV.

Are you missing any bolts? Or need different ones? The friendly team at Vogel’s Consumer Care are waiting to help: vogels.com/contac t(http://www.vogels.com/contact)

Make sure bolts and spacers are positioned correctly.

Step 2: Attach the wall mount to the wall

How well do you know your walls? What they’re made of matters more than you think…
Concrete / Brick wall

1. Decide how high you want the wall mount Ⓐ to Aim for the TV to be at eye level when seated.
2. Hold the wall mount Ⓐ against the wall and mark the location of the 4 Use a spirit level to level the wall mount.
3. Mark the drill at the length of the bolts Ⓗ.
4. Drill until the thread of the bolts Ⓗ completely fits in the

Do not use the wall mount as a drill guide.
Up for some smooth sailing? Pre-drill the holes with a 5mm concrete/brick drill.

1. Attach the wall mount Ⓐ to the wall with the bolts Ⓗ, washers Ⓕ, and plugs Ⓖ.

Walls with wooden studs

1. Don’t just guess! Always use a stud finder to determine the position of
2. Decide how high you want the wall mount Ⓐ to Aim for the TV to be at eye level when seated.
3. Hold the wall mount Ⓐ against the wall and mark the location of the 4 Use a spirit level to level the wall mount.
4. Mark the drill at the right
5. Now for the fun part… drilling the

Do not use the wall mount as a drill guide.

1. Attach the wall mount Ⓐ to the wall with the bolts Ⓗ and washers Ⓕ.

Other wall type / I don’t know my wall type

If your wall is a little special – for example, hollow bricks, metal stud walls, wood panels or plasterboard – or you simply aren’t sure, don’t worry! Just ask your installer, specialist supplier or the Vogel’s Consumer Care team at www.vogels.com/contact (http://www.vogels.com/contact).

Step 3: Attach the TV to the wall mount

Carefully lift and attach the TV to the wall mount Ⓐ.
Job done now! Enjoy watching your TV!

Handy features

Tilt

1. Unplug the cables from your
2. Move the TV slightly to the
3. Lift your TV off of the wall mount Ⓐ, and put it down somewhere

Again, lifting your TV is a two-person job. Always get help.

1. Loosen the screws on the strips Ⓑ using a screwdriver and number 8
2. Pull the hooks on the strips Ⓑ out for more tilt angle or push them in for a smaller tilt
3. Tighten the screws on the strips Ⓑ using a screwdriver and number 8
4. Try it out by hanging your TV on the Make sure both strips Ⓑ support the TV.

Make sure the screen is in line with your eye level when seated for some well- deserved TV time.

Removing your TV

1. Unplug the cables from your
2. Move the TV slightly to the

1. Lift your TV off of the wall mount Ⓐ, and put it down somewhere

Again, lifting your TV is a two-person job. Always get help.

Read More About This Manual & Download PDF:

References

• Our customer Service | Vogel's
• Our customer Service | Vogel's
• MA 3010 Series

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>