Equip 351025 Wireless 1D Laser Barcode Scanner Installation Guide
- June 21, 2024
- equip
Table of Contents
Equip 351025 Wireless 1D Laser Barcode Scanner Installation Guide
** Please download the detailed User Manual from equip website: https://www .equip-info.net/ for more information.
Equip® is a registered trademark of Digital Data Communications GmbH ©
Copyright Digital Data Communications GmbH. All Rights Reserved
Specification
Package Content
⚫ 1 x Barcode Scanner
⚫ 1 x Quick Installation Guide
⚫ 1 x Charging Receiver Stand
Product Diagram
The basic setting
-
Reset to Defaults
-
**Fast pairing
**
- **Firmware Version
**
- Channel setting
The scanner and terminal provide 21 channels to avoid mutual interference.
The setting steps of channels:
1. Set the channel of the terminal, and wait for the scanner to receive a
response after the setting is completed;
2. Set the channel of the scanner, please make sure that the set channel is
accorded with the channel of the terminal.
- **Keyboard Language setting
**
- Transmission Mode
Scanner has 2 wireless data transmission mode:
Note: Switch between any mode will clear the memory
- **Inventory Options
**
- Power Savin Options
Notes:
- Do not look directly at or illuminate by means of an instrument (telescope)!
- Do not remove the baffle on the lens guard and avoid exposure to the eyes!
- Please work with professional staff when it needed disassembled, adjusted or repaired!
- Do not disassemble, impact, squeeze, or put into fire or water. If there is a serious bulging, please do not continue to use. Do not put it in high temperature!
Reading Skills
In order to obtain good reading effect, the target beam projected by the
viewfinder should aim at the center of the barcode, but can be aimed in any
direction for reading.
Aim at the barcode and press the trigger to make the target beam in the middle
of the barcode. The closer to the barcode, The beam becomes smaller farther
away from the barcode, The beam becomes larger. If the bar code is small, the
scanner should be close to the barcode. If the barcode is larger, the scanner
should be further away from the barcode, making it easier to read the barcode
correctly.
If the barcode is high in reflectance (for example, coated), you may need to
tilt the scanner at an Angle to successfully scan the barcode.
Simple-maintain
- The stains and dust on the scan window will be affect the scanner’s working. When cleaning, you should use good quality facial tissue to wipe gently. Then blow it clean with a blown balloon. If you use poor paper to clean for a long time, it will damage the surface of the scanning window and affect the reading effect of the scanner.
- The casing of the scanner can be wiped with a clean soft cloth. If needed, use a little detergent to add water and rub it with a soft cloth.
WEEE: Dispose of the product at a recycling point. Do not dispose of together with household waste. Incorrect storage/disposal can harm the environment and/or cause injury.
CE, UKCA: Equip declares that this product complies with the directives listed in the section ‘Declaration of Conformity’.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>