Lenovo XCC2 XClarity Controller 2 ThinkSystem Integrated User Guide

: June 20, 2024
: Lenovo

Table of Contents

Lenovo XCC2 XClarity Controller 2 ThinkSystem Integrated
Specifications
Features
Important considerations
Trademarks
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lenovo XCC2 XClarity Controller 2 ThinkSystem Integrated

Specifications

Service Processor: AST2600 baseboard management controller (BMC)
Processor: Dual-core ARM Cortex A7 32-bit RISC running at 1.2 GHz
Integrated Fast Ethernet MACs: Four 10/100/1000 Mbps

Lenovo XClarity Controller 2 (XCC2)

Product Guide
Most of the latest Lenovo ThinkSystem, ThinkAgile and ThinkEdge servers contain an integrated service processor, XClarity Controller2 (XCC2), which provides advanced service-processor control, monitoring, and alerting functions. The XCC2 consolidates the service processor functionality, super I/O, video controller, and remote presence capabilities into a single chip on the server system board.

XCC2 is based on the AST2600 baseboard management controller (BMC) using a dual-core ARM Cortex A7 32-bit RISC service processor running at 1.2 GHz. XCC2 integrates four 10/100/1000 Mbps Fast Ethernet MACs compliant with IEEE802.3 and IEEE802.3z specifications.

Figure 1. ThinkSystem V3 servers include the XClarity Controller2 integrated service processor

Did you know?
XCC2 can manage and configure multiple XCC2s from one console. For more information see the Neighbor Group section.
With the System Guard feature, you can monitor hardware inventory for unexpected component changes, and simply log the event, or if needed, you can prevent the servers from booting. For more information, see the System Guard section.

Features

There are two levels of features of XCC2: Standard and Platinum. Compared to the XCC functions of ThinkSystem V2 and earlier systems, XCC2 Platinum adds the same features as Enterprise and Advanced levels in XCC, plus additional and new features.

XCC2 Standard
XClarity Controller2 Standard offers the following capabilities:

Gathering and viewing system information and inventory
Monitoring system status and health
Alerting and notifications
Event logging
Configuring network connectivity
Configuring security
Updating system firmware
Configuring server settings and devices
Real-time power usage monitoring
Remotely controlling server power (Power on, Power off, Restart)
Managing FoD activation keys
Redirecting serial console via IPMI
Capturing the video display contents when an operating system hang condition is detected FIPS 140-2 compliant encryption

For more information, see the following page:
https://pubs.lenovo.com/xcc2/NN1ia_c_standardlevelfeatures

XCC2Platinum
XClarity Controller2 Platinum adds the following functionality to the Standard features:

Event Logs
- Component Replacement Log
RAS
- Boot Capture
- Crash Video Capture
Alerts
- Syslog
Remote Presence
- Remote KVM
- Mounting of local client IO/IMG files
- Quality/Bandwidth Control
- Virtual Console Collaboration (6 users)
- Virtual Console Chat
- Video Record/Replay
- Virtual Media mounting of remote ISO/IMG files http, Samba & NFS
- Remote Console Java Client
Serial Redirection
- Serial Redirection via Telnet / SSH
Security
- Single Sign-On
- Security Key Lifecycle Manager (SKLM)
- IP address blocking
- Enterprise Strict Security mode (CNSA compliant) (new feature)
- System Guard (new feature)
Power Management
- Power Capping
- OOB Performance Monitoring — System Performance metrics
- Real time Power Graphics
- Historical Power Counters
- Temperature Graphics
Deployment & Configuration
- Remote OS Deployment
Firmware Updates
- Sync with Repository
- Firmware bundle update
- Firmware rollback from the local repository in the MicroSD card
Other Management Functions
- Neighbour group management (new feature)

For details, see the following page:
https://pubs.lenovo.com/xcc2/NN1ia_c_platinumlevelfeaturesManagement

Management interfaces

The XCC can be accessed remotely via these methods:

Command-line interface. To access the CLI interface, use SSH to log in to the management processor
Web-based interface. To access the web-based interface, point your browser to the IP address for the management processor. The new intuitive interface includes at-a-glance visualizations and simple access to common system actions. The dashboard is shown in the following figure.
XCC2 can also be accessed remotely through industry-standard interfaces:
Intelligent Platform Management Interface (IPMI) Version 2.0
Simple Network Management Protocol (SNMP)
- Version 3 supported (no SET commands)
- Version 1 supported, traps only
Common Information Model (CIM-XML)
Data Center Manageability Interface (DCMI) Version 1.5
Representational State Transfer (REST) support
Redfish support (DMTF compliant) currently with specification v1.15.0 -schema bundle is 2021.4
Web browser – HTML 5-based browser interface (Java and ActiveX not required) using a responsive design (content optimized for the device being used – laptop, tablet, phone) with NLS support

Access via the XClarity Mobile app
XCC2 can also be managed locally from the XClarity Mobile app on a phone or table. The mobile device is physically attached to the server via a USB cable connected to a front USB port with XClarity Controller access.

The steps to enable this tethering function are as follows:

If you haven’t done so already, install the XClarity Mobile app on your mobile device.
Enable USB Management on the server, by holding down the ID button for 3 seconds (or pressing the dedicated USB management button if one is present)
Connect the mobile device via a USB cable to the server’s USB port with the management symbol
In iOS or Android settings, enable Personal Hotspot or USB Tethering
Launch the XClarity Mobile app

Once connected you can see the following information via a Virtual Operator Panel:

System status, firmware, network, health, and alert information (read-only, no login required)
Server management functions including configuring systems management and network settings, and controlling system power (power on, power off, restart) (XClarity login credentials required)

Part Numbers
Models of ThinkSystem V3 servers come with either XCC2 Standard or XCC2 Platinum, depending on the server type and the model, as described in the Server support section.

Important considerations

If you will be using XClarity Administrator for tasks such as remote control and Bare Metal Operating System Deployment then the XCC Platinum level must be installed on the server.
XClarity Controller 2 Platinum license includes a hardware license for Lenovo XClarity Energy Manager (LXEM), a power and temperature management solution for data centers.

The following table shows the field upgrades available for models that come with XCC Standard.

Table 1. XCC2 field upgrades

Part number : 7S0X000KWW
Description: Lenovo XClarity Controller 2 (XCC2) Platinum Upgrade

For configure-to-order (CTO) models, you can specify the XCC2 level you require by selecting the appropriate XCC2 feature code as listed in the following table.

Table 2. XCC2 upgrades for configure-to-order

Feature code : SBCV
Description: Lenovo XClarity Controller 2 (XCC2) Platinum Upgrade

Server support
The following table shows what level of XCC2 is included with each ThinkSystem V3 server.

Table 3. Server support

Server

|

XCC2 Standard

| XCC2 Platinum
---|---|---
CTO orders| Preconfigured models
Lenovo ThinkSystem servers with Intel Xeon D processors|
SE350 V2| Included| Available upgrade| Varies
SE360 V2| Included| Available upgrade| Varies
Lenovo ThinkSystem servers with 4th Gen Intel Xeon Scalable processors|
ST650 V3| Included| Available upgrade| Varies
SR630 V3| Included| Available upgrade| Varies
SR650 V3| Included| Available upgrade| Varies
SR850 V3| Included| Included| Included
SR860 V3| Included| Included| Included
SR950 V3| Included| Included| Included
SD650-I V3| Included| Available upgrade| Not applicable
SD650 V3| Included| Available upgrade| Not applicable
Lenovo ThinkSystem Servers with 4th Gen AMD EPYC processors|
SE455 V3| Included| Available upgrade| Varies
SR635 V3| Included| Available upgrade| Varies
SR645 V3| Included| Available upgrade| Varies
SR655 V3| Included| Available upgrade| Varies
SR665 V3| Included| Available upgrade| Varies
SR675 V3| Included| Included| Included
SD665 V3| Included| Available upgrade| Not applicable
SD665-N V3| Included| Available upgrade| Not applicable

Some preconfigured models of the server have XCC2 Platinum included. See the Models section of the product guide for specifics.

Security dashboard
The XCC2 provides a security dashboard that shows an overall security assessment and status of the system. Providing status on:

BMC Security Events report events asserted by security issues, such as chassis intrusion, PFR detected corruption, System Guard detected hardware inconsistency, security jumper open on planar, etc.
BMC Security mode provides an overall status of Security Mode compliance.
BMC Services & Ports enumerate all insecure services/ports enabled but non-compliant with the current Security Mode.
BMC Certificates list all non-compliant certificates used by XCC.
BMC User Accounts provide general suggestions on how to make account and password management more secure.

The dashboard shows a warning icon if there is any risk in these security areas scanned by XCC. The detail link under each category also brings the user to the setup page to solve the issues.

Figure 3. XCC2 Security Status dashboard, highlighting a warning on User Accounts

Service and support
With XCC2-based servers, customers can create a service forwarder that automatically sends service data for any managed device to Lenovo Support using the Call Home function.

Figure 4. XCC2 Call Home

When enabled, Call Home automatically contacts Lenovo to open a service ticket and sends in-service data collected from a managed device whenever that device reports a hardware failure.
Service data that you would typically upload manually to Lenovo Support is automatically sent to the Lenovo Support Center over HTTPS using TLS 1.2 or later.

Lenovo is committed to the security of customer data : Customer business data is never transmitted and access to service data in the Lenovo Support Center is restricted to authorized service personnel.

If the customer is managing their servers with XClarity Administrator they can choose to configure centralized Call Home via XClarity Administrator, rather than at each XCC or XCC2 instance. XClarity Administrator will additionally provide the capability to view information about service tickets that were manually and automatically submitted to the Lenovo Support Center using Call Home, including the current status and associated service files that were transferred to the Lenovo Support Center, and service tickets that were generated by support services other than Call Home.

For full details see XClarity Administrator (LXCA) working with service and support.

For details on which events per system will automatically notify support, go to the Events and Alerts for servers page in the LXCA User Guide, click the link for the specific server, then select the submenu entry for XCC events that automatically notify Support.

Enhancements Included with XCC2 Platinum

Compared to the XCC, the XCC2 Platinum license adds the same features as Advanced and Enterprise levels combined in XCC, plus additional features.

The new features included with XCC2 Platinum are as follows:

System Guard – Monitor hardware inventory for unexpected component changes, and simply log the event or prevent booting.
Enterprise Strict Security mode – Enforces FIPS 140-3 level security and enhanced NIST 800-193
Neighbor Group Feature Group – Enables administrators to manage and synchronize configurations and firmware levels across multiple servers.
XCC2 Service Log – New service tool that provides XCC first-failure logs in HTML and JSON format.

For details, see the following sections:

System Guard
Enhanced Security Modes
Neighbor Group
Service Log

System Guard
To ensure your server arrives as it left Lenovo manufacturing, and confirm nothing has changed along the way, with the XCC2-based servers, customers can request to have the System Guard feature enabled before shipment of their Server. The system Guard feature takes a snapshot of the hardware component inventory as a trusted reference and then monitors for any deviation from the reference snapshot. When a deviation occurs, it can report an event to the user and, optionally, can also prevent the server from booting into the OS and prompt the user for a response.

Figure 5. System Guard in XCC2

User can also take a snapshot at any time even while the feature is disabled. The generation of snapshot takes around one minute. User can select a subset of hardware components to enforce and select a corresponding action to take when deviation is detected.
Deviation detection is executed at server power on (POST) or system reboot. For example, while the OS is still running, if a disk drive is being pulled out and then plugged back in a moment later, System Guard is not going to record the event or take any action. If the extracted disk drive remains absent until next reboot, then System Guard would get in action.
For more information on working with System Guard see System Guard in the XCC2 User Guide.

Enhanced Security Modes
With XCC2, Enhanced Security Modes are now configurable.

The XCC2 Standard license enables the users to configure their servers in one of the two Security Modes: Standard Mode and Compatibility Mode. These are available in all XCC2-based servers.
The XCC2 Platinum license comes with a third Security Mode: Enterprise Strict Mode. This mode is most suitable for high-level security requirements.

Figure 6. Security Mode in XCC2
Each of the security modes has defined characteristics, as follows:

Enterprise Strict Security Mode
- Enterprise Strict Security Mode is the most secure mode.
- NIST Compliant.
- PFS-compliant (Perfect Forward Secrecy).
- All cryptography algorithms used by BMC are enterprise-strict compliant. BMC operates in standard validated mode.
- Requires enterprise strict grade certificates.
- Only services that support enterprise strict-level cryptography are allowed. Requires Feature on Demand Key to enable.
Standard Security Mode
- Standard Mode is the default security mode.
- NIST Compliant.
- PFS-compliant (Perfect Forward Secrecy).
- All cryptography algorithms used by BMC are standard-compliant.
- BMC operates in standard validated mode.
- Requires standard grade certificates.
- Services that require cryptography that do not support standard-level cryptography are disabled by default.
Compatibility Security Mode
- Compatibility Mode is the mode to use when services and clients require cryptography that is not enterprise strict/standard compliant.
- Non-NIST and PFS (Perfect Forward Secrecy) compliant
- A wider range of cryptography algorithms are supported.
- When this mode is enabled, BMC is NOT operating in standard-validated mode.
- Allows all services to be enabled.

For more information on configuring security modes refer to Security Mode in the XCC2 User Guide.

Neighbor Group

XCC2 Neighbor Group Management is a virtual management group among XCC2-based servers, which allows the management of up to 200 XCC2-based servers from a single XCC2 management interface.
Typically, in the past, XCC could only manage a single server and XClarity Administrator (LXCA) facilitated scalability management to multiple servers. However, if LXCA is not deployed in the field, especially for SMB users, each node has to be configured one by one which is an inefficient process.
To counter this scenario, the XCC2 neighbour group feature provides a flexible way of initiating speedy deployment for multiple servers within a local network segment.

Figure 7. XCC2 Neighbor Group
The XCC neighbour group provides the following capabilities:

Discover the neighbour nodes located in the same local network segment using a Simple Service Discovery Protocol (SSDP) multicast message.
Monitor the system health and power status of the neighbour nodes.
Configure neighbour group in leader node.
Clone system configuration to multiple members of the neighbour group.
Initiate concurrent firmware updates to multiple members of the neighbour group.
The Leader node XCC supports a maximum of 200 nodes.

For more information on XCC Neighbor Group Management see Neighbor Group Management in the XCC2 User Guide.

Service Log
To identify the root cause of a server issue or at the request of Lenovo Support, you might need collect service data that can be used for further analysis. XCC2 Service data log is a new service tool that provides XCC2 first-failure logs in HTML and JSON formats.

Figure 8. Service log

By default, the service log will contain the following data: system information, system inventory, system utilization, SMBIOS table, sensors reading, events log, FOD key, SLP key, UEFI configuration and XCC2 configuration.
Users can also mouse over the Basic Information option and click on the floating window to see some actual data to be exported, as shown in the following figure.

Figure 9. Mouse over the additional information option
By clicking to see some actual data provided the user will be presented with a similar view to the following figure.

Figure 10. Example of Actual Data being exported
While Basic Information is mandatory, the user has the option to additionally export the following information:

Network information (IP, hostname)
Telemetry (24 hours data)
Audit log (contains username)
Latest failure screen

REST API interface
XCC2 provides support for the industry standard Redfish Scalable Platforms Management API. The Redfish API can be used to access XCC2 data and services from applications running outside of the XCC2. This allows for easy integration of Lenovo XCC2 capabilities into Lenovo or 3rd party software. Redfish uses RESTful interface semantics and JSON resource payload to perform system management via the HTTPS protocol.

Lenovo additionally provides some Python and PowerShell sample scripts to use Redfish. These are available as open-source code on Lenovo’s Github page http://github.com/lenovo/

Lenovo Python Redfish Scripts: https://github.com/lenovo/python-redfish-lenovo
Lenovo PowerShell Redfish Scripts: https://github.com/lenovo/powershell-redfish-lenovo

These scripts utilize Redfish API to manage Lenovo ThinkSystem servers. Currently, the scripts support hardware/firmware inventory, basic management of configuration and control, firmware updates, and alerts/eventing. The scripts can be used both remotely (out-of-band to the XCC2 Network) and locally (in-band on the ThinkSystem server, connecting to the XCC2 local host Network interface).

Other open-source tools that support Redfish include Ansible, which added support for Redfish starting with version 2.7, in the form of three modules for Remote Hardware Management. These modules are tested on Lenovo ThinkSystem servers:

redfish_facts: https://docs.ansible.com/ansible/latest/modules/redfish_facts_module.html “
redfish_command : https://docs.ansible.com/ansible/latest/modules/redfish_command_module.html
redfish_config: https://docs.ansible.com/ansible/latest/modules/redfish_config_module.html

See the Lenovo publications site for more information on XCC2 REST API: https://pubs.lenovo.com/xcc2-restapi/

Seller training courses
The following sales training courses are offered for employees and partners (login required). Courses are listed in date order.

Lenovo XClarity Controller and Lenovo XClarity Provisioning Manager 2023-12-04 | 60 minutes | Employees and Partners
This course contains an overview of the Lenovo XClarity family of products and covers guidelines regarding how to use Lenovo XClarity Essentials, Lenovo XClarity Controller, and Lenovo XClarity Provisioning Manager.

Learning Objectives

Describe when to use Lenovo XClarity Essentials, Lenovo XClarity Controller, and Lenovo XClarity Provisioning Manager.
Explain how to launch the Lenovo XClarity Controller and Lenovo XClarity Provisioning Manager.
Recognize the menu options and screens of both Lenovo XClarity Controller and Lenovo XClarity Provisioning Manager.
Published: 2023-12-04
Length: 60 minutes
Employee link: Grow@Lenovo
Partner link: Lenovo Partner Learning
Course code : DLXCO101

Additional information
For more information, consult these resources:

XClarity Controller online documentation:

Overview
XCC within ThinkSystem Servers with Intel Xeon SP (1st, 2nd Gen)
XCC within ThinkSystem Servers with Intel Xeon SP (3rd Gen) and AMD EPYC (2nd, 3rd Gen)
XCC2 within ThinkSystem Servers with Intel Xeon D-2700 & Intel SP (4th Gen) and AMD EPYC (4th Gen)
XCC2 Redfish REST API documentation
XCC Overview videos:
- Playlist item 6 : Lenovo XClarity Mobile App demo
- Playlist item 10: Lenovo XClarity Controller Overview
XClarity Administrator Online Documentation
XClarity Systems Management Documentation
Lenovo Online Documentation

Related product families
Product families related to this document are the following:

Lenovo XClarity

Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only the Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:

Lenovo (United States), Inc.
8001 Development Drive
Morrisville, NC 27560
U.S.A.

Attention: Lenovo Director of Licensing

LENOVO PROVIDES THIS PUBLICATION ”AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimers of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

Any references in this publication to non-Lenovo websites are provided for convenience only and do not in any manner serve as an endorsement of those Websites. The materials at those Websites are not part of the materials for this Lenovo product, and use of those Websites is at your own risk. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.

This document, LP1800, was created or updated on November 24, 2023.

Send us your comments in one of the following ways:

Use the online Contact Us review form found at: https://lenovopress.lenovo.com/LP1800
Send your comments in an e-mail to: comments@lenovopress.com

This document is available online at https://lenovopress.lenovo.com/LP1800.

Trademarks

Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at
https://www.lenovo.com/us/en/legal/copytrade/.

The following terms are trademarks of Lenovo in the United States, other countries, or both:

Lenovo®
ThinkAgile®
ThinkEdge®
ThinkSystem®
XClarity®

The following terms are trademarks of other companies:

Intel® and Xeon® are trademarks of Intel Corporation or its subsidiaries.
ActiveX® and PowerShell are trademarks of Microsoft Corporation in the United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of others.

Lenovo XClarity Controller 2 (XCC2)

FAQ

Q: Can XCC2 manage multiple XCC2s from one console?
- A: Yes, XCC2 can manage and configure multiple XCC2s from one console. Refer to the Neighbor Group section for more information.
Q: What are the key features of XCC2 Platinum?
- A: XCC2 Platinum includes advanced features such as Event Logs, Remote Presence, Security Key Lifecycle Manager, Virtual Console Collaboration, and more. Check the Platinum Level Features page for detailed information.