SATBSPBH Bidet Faucet SAT Instruction Manual
- June 16, 2024
- SAT
Table of Contents
Mounting Instruction
SATBSPBK / SATBSPBKC / SATBSPBOX / SATBSPBH
SATBSPBH Bidet Faucet SAT
Cleaning Recommendation
To avoid damage and reclamations, it is necesary to consider certain criteria when cleaning.At the cleaning of the fittings and showers, in principle, it must be pointed out:
- Only use cleaning material which is explicitly provided for this type of application.
- Never use cleaning materials, which contain hydrochloric acid, formic acid, chlorine pale lye or acetic acid, as they cause considerable damage.
- Phosphorus acidic cleaners are only conditionally applicable.
- Mixing cleaning agents is not permitted, generally.
- Never use cleaning materials or appliances with an abrasive effect, such as unsuitable clearing powders, sponge pads or micro fibre cloths.
- The instructions of the cleaning agent manufacturers have to be followed absolutely.
- Cleaning has to be carried out with a specified cleaner dosage, contact time, object-related and adapted to the needs.
- The building up of calcifications has to be removed by cleaning regulary.
- When using spray cleaners, spray first onto a soft cloth or sponge never directly onto the sanitary tapware, as drops could enter openings and gaps and cause damage.
- After cleaning rinse thoroughly with clean water to remove any cleaner residue.
- The use of steam cleaners is not permitted. The high temperatures can damage the products.
Important
Residues of liquid soaps, shampoos and shower foams can also cause damage, so
rinse with clean water after using.
The damage of already damaged surfaces will deteriorate under the effect of
the cleansers.
Components with damaged surfaces must be exchanged, otherwise there could be
an injury danger.
Damage caused by improper treatment will not be covered by guarantee.
Under terms of the guarantee is necessary to install filtration equipment
distribution (corner valve filter).
info@siko.cz
Contact
SAT® is registered trademark of
Swiss Aqua Technologies AG
Gewerbestrasse 9, 6330 Cham, Switzerland
www.swatec.ch
Imported by SIKO KOUPELNY a.s.
Made in P.R.C.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>