dellonda DH24 Single Monitor Mount Arm Instruction Manual

: June 16, 2024
: dellonda

Table of Contents

dellonda DH24 Single Monitor Mount Arm
Important Information
Contents
About the Product
Safety Instructions
Preparation Before Assembly
Installation With Clamp
Installation With Bolt
Attaching The Monitor
Specifications
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

dellonda DH24 Single Monitor Mount Arm

Model No. DH24
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

Important Information

Please read these instructions carefully.
Note the safe operational requirements, warnings & cautions.
Use the product correctly and with care for the purpose for which it is intended.
Failure to do so may cause damage and/or personal injury and will invalidate the warranty.
Keep these instructions safe for future use.

About the Product

An adjustable single monitor arm creates a more ergonomic workspace.
The monitor arm easily adjusts using a gas spring system.
Features 360° rotation enabling you to convert your display orientation from landscape to portrait.
Features cable management system ensuring a tidy desk.

Safety Instructions

This product contains small items that could be a choking hazard if swallowed. Keep these items away from small children.
Ensure instructions are read and completely understood before attempting installation. If unsure contact a professional installer for assistance.
The desk/mounting surface must be capable of supporting the combined weight of the mount and the display. Otherwise, the structure must be reinforced.
Never exceed the max. load of 9kg.
Safety gear (safety shoes) and proper tools must be used.
A minimum of 2 people are required for this installation. Failure to use safety equipment can result in property damage, serious injury or death.
Check fixings for tightness every 2 months.
Note: this product is intended for indoor use only.
WARNING! This product contains high-pressure gas spring parts. Do not put it into a fire, at high temperature, or disassemble it.
To ensure the sealing performance of the gas spring the upper arm (with the spring) should adjusted properly each month.

Preparation Before Assembly

Make sure the VESA holes are 100 x 100 mm or 75 x 75 mm in the monitor (fig.1).
Remove the original fixed base of the monitor.

Installation With Clamp

For table thickness: 20-100mm.
Select the right holes according to the thickness of the desk.

Installation With Bolt

For table thickness: 25-90mm
Use the correct size washers (fig.4.D) for your monitor.

Attaching The Monitor

To adjust the monitor use the supplied 5×5 Allen key (F)
Adjust the monitor height after installation. If the monitor keeps dropping, use the supplied 5×5 Allen key to adjust the screw on the arm in “-” direction.
If the monitor cannot be lowered use the supplied 5×5 Allen key to adjust the screw on the arm in “+” direction.
Make the resistance of the arm equal to the weight of the monitor.

Attaching And Using The Inbuilt Cord Management

Fig.6.12 Remove the cover from the top arm by gently pulling until it comes away.
Fig.6.8 Use cable tie to secure cables in the arm.
To remove the cable tidy from the lower arm remove the screw.
If using the clamp to attach to the desktop. Use the plastic cover/cable tidy to cover the clamp and manage the cables.

Specifications

Supported VESA: 75 x 75, 100 x 100mm
Supported Screen Size: 10-27”
Load Capacity: 2-9kg
Tilt Range: -85 – 15°
Installation: Clamp & Grommet

Environment Protection Waste Protection and Electrical Equipment Regulations (WEEE)

Recycle unwanted packaging materials. When this product is no longer required or has reached the end of its useful life, please dispose of it in an environmentally friendly way. Drain any fluids (if applicable) into approved containers, under local waste regulations.
Under the Waste Batteries and Accumulators Regulations 2009, Dellonda would like to inform the user that this product contains one or more batteries. It is our policy to continually improve products and we reserve the right to alter data, specifications, and parts without prior notice.
No liability is accepted for incorrect use of this product. Guarantee is 12 months from purchase date, proof of which is required for any claim.