VOLLRATH 38769 Cafeteria Breath Guard Instruction Manual
- June 16, 2024
- VOLLRATH
Table of Contents
VOLLRATH 38769 Cafeteria Breath Guard
Specifications
- Product Name: Vollrath Cafeteria Breath Guard
- Model: One Piece & Three Piece
- Item No.: 2350030-01 Rev 04/12
FAQ
- Q: What should I do if I accidentally overtighten the cap nuts?
- A: If you accidentally overtighten the cap nuts, stop immediately to prevent cracking of the plastic. Loosen the cap nuts slightly and then retighten carefully until secure.
- Q: Can I modify the breath guard installation process?
- A: It is recommended to follow the provided installation instructions to ensure proper assembly and functionality of the cafeteria breath guard.
- Q: How can I contact Vollrath for further assistance?
- A: You can contact Vollrath Company for assistance via phone at Main Tel: 800.628.0830 or Service Tel: 800.628.0832, or visit their website at www.vollrathco.com for more information.
Installation Instructions
These instructions cover the installation of the one pice Cafeteria Breath Guard and the three piece Cafeteria Breath Guard.
One Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE: Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
- Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
Three Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE: Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
- Install the side shield (G) to the support tube (D) securing with cap nuts (C) shown. Repeat on the other side.
- Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
- Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.
Contacts
The Vollrath Company, L.L.C.
- 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
- Main Tel: 800.628.0830
- Service Tel: 800.628.0832
- FAX: 800.752.5620
Vollrath of Canada, Co.
- Tel: 800.695.8560
- FAX: 800.752.5620
© 2010 The Vollrath Company, L.L.C.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>