STRONG SRT 32HF2003C 32 Inch HD Smart TV User Manual

: June 20, 2024
: STRONG

Table of Contents

STRONG SRT 32HF2003C 32 Inch HD Smart TV
Product Information
Product Usage Instructions
INSTRUCTION
INSTALLATION
INSTALLING THE BATTERIES
FIRST TIME INSTALLATION
ELECTRONIC PROGRAMME GUIDE (EPG)
MENU SETTINGS
MEDIA
TROUBLESHOOTING
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STRONG SRT 32HF2003C 32 Inch HD Smart TV

Product Information

Specifications

Model : F200C Serie
Screen Size : HD TV 32” (80CM) / FHD 40 (100CM)
Model Numbers : SRT 32HF2003C / SRT 40FF2003C

Product Usage Instructions

Safety Instructions
Read all of the instructions before operating the set. Keep these instructions for later use. Only use attachments/accessories specified or provided by the manufacturer. Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Ensure ventilation openings are not covered by items such as newspaper, tablecloths, or curtains. Avoid exposing the apparatus to dripping or splashing and do not place objects filled with liquids on it.

Ensure external wires are installed by a trained person or use ready-made leads or cords. Securely attach the apparatus to the floor/wall according to installation instructions to prevent injury. Do not incorrectly replace the battery to avoid the danger of explosion. The battery should not be exposed to excessive heat like sunshine or fire.

Excessive sound pressure from earphones and headphones can cause hearing loss.

Installation

Default PIN Code: 0000

Front Panel/Underside: Check the front panel and underside for any necessary connections or buttons.
Rear Panel: Connect cables to the rear panel following the provided instructions.
Remote Control: Install batteries in the remote control and follow instructions for use.

First Time Installation

AIR > DVB-T/T2 Installation: Follow the steps for installing DVB-T/T2.
CABLE > DVB-C Installation: Follow the steps for installing DVB-C.
SATELLITE > DVB-S/S2 Installation: Follow the steps for installing DVB-S/S2.

FAQ

Q: How do I change the picture settings on my TV?
- A: You can adjust the picture settings by navigating to the Picture Menu in the TV’s settings. From there, you can modify settings such as contrast, brightness, color, and more.
Q: What should I do if my remote control is not working?
- A: If your remote control is not working, first check if the batteries are properly installed. If they are, try replacing them with new ones. If the issue persists, ensure there are no obstructions between the remote and the TV sensor.

F200C Serie

HD TV 32” (80CM) / FHD 40” (100CM)
SRT 32HF2003C / SRT 40FF2003C

User Manual

www.strong-eu.com

Supplied by STRONG Austria Represented by STRONG Ges.m.b.H. Teinfaltstraße 8/4. Stock
1010 Vienna, Austria
Email: support_at@strong-eu.com

Licenses
This product contains one or more programs protected under international and U.S. copyright laws as unpublished works. They are confidential and proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole or in part, or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby Laboratories. All rights reserved.

SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, STRONG declares that the device SRT 32HF2003C, SRT 40FF2003C is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://eu.strong- eu.com/downloads/

Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. All product names are trademarks or registered trademarks of their respective owners.
© STRONG 2024. All rights reserved.

INSTRUCTION

SAFETY INSTRUCTIONS
Read all of the instructions before operating the set. Keep these instructions well for later use.

Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.).
Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
The mark indicates a risk of electric shock. The external wires must be installed by an instructed person or ready-made leads or cords must be used.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent types.
The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Listening to music at high volume levels and for extended durations can damage one’s hearing.
In order to reduce the risk of damage to hearing, one should lower the volume to a safe, comfortable level, and reduce the amount of time listening at high levels.
The mains plug or appliance coupler is used as disconnect device, it shall remain readily operable. When not in use and during movement, please take care of the power cord set, e.g. tie up the power cord set with cable tie or something like that. It shall be free from sharp edges or similar which can cause abrasion of the power cord set. When put into use again, please make sure the power cord is not damaged. In case of damages, please get the power cord replaced by a similar one with the same specifications. The absence of a light indication on the apparatus does not mean that it is fully disconnected from the mains. To disconnect the apparatus completely, the mains plug must be pulled out.
Attention should be drawn to environmental aspects of battery disposal.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
To prevent the spread of fire, keep candles or other open flames away from this product at all times.
A USB terminal can provide a maximum of 500 mA.
Equipment with this symbol is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

Operating Environment

Do not install this equipment in a confined space such as a bookcase or similar unit.
Do not use the set near damp, and cold areas, protect the set from overheating.
Keep away from direct sunlight.
Do not use the set near dust place.
Do not attach candle to accessible opening area, to avoid flammable foreign material from entering the TV.

WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

STORAGE
Your device has been carefully checked and packed before shipping. When unpacking it, make sure that all the parts are included and keep the packaging away from children. We recommend that you keep the carton during the warranty period, to keep your device perfectly protected in the event of repair or warranty.

ACCESSORIES

1x installation instructions
1x safety instructions/warranty cards
1x remote control
2x AAA batteries

EQUIPMENT SET-UP

Install the display on a solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. This apparatus can be used in tropical and/or moderate climates.

Stand assembly instruction

Carefully place the TV with its front side facing down on a cushioned flat surface in order to protect the TV and the TV screen from damage.
Take out the 2x feet and assemble them to the TV.
Fasten the feet to the bottom of the TV using the 4xPA4x14mm screws.

NOTE: Clean the screen with a soft, dry cloth after switching off and unplugging the television and avoid glass sprays and other household cleaning agents.

This user manual provides complete instructions for installing and using this TV. The symbols serve as follows.

WARNING: Indicates warning information.
NOTE: Indicates any other additional important or helpful information.
Menu: Represents a button on the remote control or the TV.
Move To : Represents a menu item within a window.

INSTALLATION

DEFAULT PIN CODE: 0000
FRONT PANEL/UNDERSIDE

Fig. 2

NOTE : The graphics are for representation only.

Power indicator /remote sensor
Speakers

REAR PANEL

NOTE: The graphics are for representation only.

32”

Fig. 3

HDMI 2 (CEC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console.
HDMI 1 Connect HDMI input signal from a signal source such as Chromecast stick, Android box, Google TV box or Dolby audio amplifier.
ANT 1 Connect a coaxial cable to receive signal from the DVB-T/T2 antenna or DVB-C cable.
ANT 2/ SAT IN Connect a coaxial cable to receive signal from the Dish LNB. Connect a coaxial cable to receive signal from the DVB-T/T2 antenna or DVB-C cable.
S/PDIF (optical) Use an optical cable to connect your TV to a compatible digital amplifier or Home theatre set.
COMMON INTERFACE Insert a Conditional Access Module (CAM) for decoding channels.
Mini AV IN To connect your video camera or other device using 3.5 mm AV cable to your TV to play videos on your TV screen.
USB Connect a USB device for playback of multimedia files
Power button Press to turn the TV on, open menu or long press switch to standby

40”

HDMI 3 (CEC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console.
HDMI 2 (CEC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console.
USB 2.0 Connect a USB device for playback of multimedia files
HDMI 1 Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console.
ANT 1 Connect a coaxial cable to receive signal from the DVB-T/T2 antenna or DVB-C cable.
ANT 2/ SAT IN Connect a coaxial cable to receive signal from the Dish LNB. Connect a coaxial cable to receive signal from the DVB-T/T2 antenna or DVB-C cable.
S/PDIF (optical) Use an optical cable to connect your TV to a compatible digital amplifier or Home theatre set.
COMMONINTERFACE Insert a Conditional Access Module (CAM).
HEADPHONE Headphone or Earphone audio output, speakers will be muted when earphone is plugged in and headphone selected.
USB 2.0 Connect a USB device for playback of multimedia files
Mini AV IN To connect your video camera or other device using 3.5 mm AV cable to your TV to play videos on your TV screen

REMOTE CONTROL

INSTALLING THE BATTERIES

Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the polarity markings inside the compartment.

NOTE: Pictures are only for reference. Actual items may differ.

Open the cover.
Put 2x AAA batteries in the compartment and make sure the polarity is correct.
Close the cover.

Precautions for using the batteries
Improper using of the battery will cause leakage. Carefully follow these instructions.

Please note the batteries’ polarity to avoid short circuit.
When the battery’s voltage is insufficient which affect the use range, you should replace it with a new battery. Remove the batteries from the remote control unit if you do not intend to use it for a long time.
Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
Do not put the battery into fire, and charge or decompose the battery.
Please dispose batteries abide by relevant environmental protection regulation.

USING THE REMOTE CONTROL

Use the remote control by pointing it towards the remote sensor. Items between the remote control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote control, also do not put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of the unit by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so, please change the lighting or TV’s position, or operate the remote control closer to the remote sensor.

FIRST TIME INSTALLATION

After all connections have been properly made, switch on your TV. The welcome wizard appears on screen and confirm with OK to start the installation. The language selection will appear on screen. Use to select the OSD Language of your preference. Press and then use to select the country where you will use this TV. This is important to set setting as text character correctly. Press to change Environment from Home to Shop modus to demonstration TV in shop, otherwise keep as it is. Press and then use to select the Antenna / Tuner type you are using for reception. Press for next step to go to Tuning setup. If you like to make change, use to go step back in this wizard.

In Antenna Type selection you select which tuner input source you like to use.

Air to receive terrestrial broadcasts with indoor or outdoor antenna.
Cable to receive cable broadcasts if you have cable connection.
Satellite to receive satellite broadcasts if you are equipped with a satellite dish.

Next step is depending of your choice in Tuner setup.

AIR > DVB-T/T2 I NSTALLATION
Directly when you select Air and press button. Auto channel searching for channels is started. Just wait until all channels are found. Now you can enjoy digital Tv.
If no channels are found, check antenna connection, or check if arial is correct adjusted to transmission tower. Start from beginning the installation trough menu/ option/ Installation Guide.

CABLE > DVB-C INSTALLATION
After you select Cable and press button. The Cable Scan Menu will open. In this menu you can select Full for automatically searching for channels if you do not know the details of you local provider. Select Network Search to install the channels list in sorted channel order from local provider.

Cable Setting
Press to highlight your settings.

Scan type You can select Network Search or Full.
Network ID The default setting is Auto. To enter your own value press and enter (with 0 ~ 9) the used Network ID from your provider.
Frequency The default setting is Auto. To enter your own value press and enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Symbol Rate The default setting is Auto. To enter your own value press and enter (with 0 ~ 9) the used Symbol Rate from your provider. (Ks/s) most used values are 6900 or 6875.

After selection is made, press ENTER Auto channel searching for channels is now started. Just wait until all channels are found. Now you can enjoy digital Tv.
If no channels are found, check antenna connection, or check if correct values of network are entered. Start from beginning the installation trough menu/ option/ Installation Guide.

NOTE: Please, check the settings for your cable system used by your provider! Full scan will have a duration of approximately 20 minutes, depending on your cable network.

SATELLITE > DVB-S/S2 INSTALLATION
Select Satellite press button to proceed installation for channels from satellite.
If you have selected country Germany or Austria , then Channel Preset menu will open. Select if you like load a pre-installed channel list ready to use or proceed with Auto Channel search as for all other countries.
Select Auto Channel Search to open Satellite Setup menu.
Use to highlight the satellite your dish is aimed at and confirm with ENTER button.
use to highlight the options of you dish antenna installation.
Select LNB type to select your used LNB type in the dish antenna. (Most common is 09750/10600).
Select DiSEqC 1.0 or 1.1 if your installation is using switch for selection of more satellite dishes.
(Most common is to set DiSEqC 1.0 to LNB 1 port).
Select Motor for the satellite specialist how are using motor to receive multiple satellites.

If all setting and selection are made, press BLUE Scan button to open next menu Channel Search.

Scan Mode Choose between Default (recommended) and Blind Scan
Encrypted type Select FTA channels to search Free-To-Air channels only. Select Encrypted to search scrambled /coded channels only. Select All to search all channels.

Service Type Select All to search Digital TV channels and Radio.
Select DTV for only Digital TV channels.
Select RADIO to search radio channels only.

It is recommended to use the default settings. confirm with ENTER button to start auto searching of channels. Just wait until all channels are found. Now you can enjoy digital Tv. If no channels are found, check antenna connection, or check if correct values of network are entered. Start from beginning the installation trough menu/ option/ Installation Guide.

ELECTRONIC PROGRAMME GUIDE (EPG)

EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers information on broadcasted programmes. You can access it in digital mode by pressing EPG on the remote control. Press EPG to bring up the EPG interface. Use to select a channel.
Press INDEX to switch to overview from one channel EPG. Use to select event where you like to know more details. Press EXIT to stop and return to viewing modes.

Then press the COLOUR BUTTONS for entering the required settings.

GREEN Information
YELLOW Schedule List
BLUE Set a reminded to event or set even Timer function.

Below items depend if they are available of select input source. Use SOURCE to select other source. Selections are DTV, ATV, HDMI, AV, and USB Media.

MENU CONTROL (DTV MODE)
Press MENU to enter the main menu. Press to select an item. Press ENTER to select the submenus. Press MENU to exit the item.

CHANNEL
Press MENU to display the main menu. Press ENTER to select Channel in the main menu. Press to select the option you wish to adjust in the Channel menu.
Press ENTER to enter sub menu. After finish your adjustment, press MENU to save and return to the previous menu. Below items depend if they are available of select input source. Use SOURCE to select other source.

ANTENNA TYPE
Press ENTER to select which antenna type you want to use. Select between, Air, Cable or Satellite.

AUTO TUNING
Press to select Auto Tuning. If the TV use DVB-T or DVB-C tuner please refer to chapters 3.1 and 3.2; for Satellite (DVB-S) tuner please refer to chapter 3.3.

DISH SETUP
If you use Satellite as input source, the Dish Setup menu allow you to set you satellite and belonging settings as DiSEqC port and LNB type. Afterwards you may start the Auto Tuning with the BLUE Scan button or Manual Tuning by selecting with INDEX button the wanted transponder.

DTV MANUAL TUNING (IN DVB-T MODE ONLY)
Search and store programmes manually. Press to select DTV Manual Tuning. Then press ENTER to enter the sub-menu.
Press to select a Channel No., and then press ENTER to start the search. The search stops when a programme is found and this programme will be stored in the current channel position. Press MENU to exit.

ATV MANUAL TUNING (IN DVB-C MODE ONLY)
In the Channel menu, select ATV Manual Tuning and press ENTER to access. Highlight and press to select Storage To 1 (maybe other number), Sound System and Channel No.. Then select search and press ENTER to start the search. Press for the unit to search towards higher frequency. Press for the unit to search towards lower frequency. The search stops when a programme is found and this programme will be stored in the current channel position. If you want to stop the search, press MENU.

Sound Standard Select the Sound standard.
Video Standard Select the Video standard (Available: AUTO, PAL, NTSC, SECAM)
Current CH Set the channel number.
Search Start the channel search.
Fine-Tune Adjust the frequency of the channel.

CHANNEL EXTRA SETTINGS
Logical Channel Numbering LCN
This function sort channels automatically to logic order in DVB-T modus if broadcaster support this function. Press ENTER to select On or Off.
Dynamic Rescan This function can search changes or for new channels automatically. Press ENTER to select On or Off. NOTE: if set to On, your channel list sorting can be changed if new channels are found.
Programme Edit Edit the programmes. You can press the COLOUR BUTTONS on the remote control to skip programmers, rename and delete programmes or move programmer. To add channels to Favourite lists, press the button on the remote control, to open Favourite lists. Select with The buttons the channel which you want to add to favourite lists, and press the COLOUR BUTTONS to add the channel to the desired favourite lists, RED: Fav A, GREEN: Fav B, YELLOW: Fav C, BLUE: Fav D. After you added the channel to the desired favourite lists a star symbol appear next to the channel name inside with the Favourite Group name: A, B, C, D. You can add the same channel to multiple favourite lists, pressing the COLOUR BUTTONS. If you want to remove the channel from the favourite list repeat the above steps.”
Cl information In the case you use an CI Module for decoding encoded channels, this menu shows the internal menu of the card and/or CAM.
Signal Information Showing the information of current DTV channel. Only available with DTV signal.
Channel Type Select FTA to search Free-To-Air channels only, or ALL to search FTA and Encrypted channels.

NOTE: If Logical Channel Numbering function is set to ON then sorting of channels is not possible in normally way. Logical Channel Numbering is not functioning in satellite mode.

PICTURE MENU

Picture Mode Select one of the automatic picture control mode. Available choices are Home, Vivid, Standard, Mild. Select User to adjust Contrast, Brightness, Colour and Sharpness as you like.
Colour Temperature Select the overall colour tone of the picture. Available choices are User, Cool, Standard, Warm. Noise Reduction, Eliminates noise in the picture. Available choices are Off, Low, Middle, High and Default.

CONTRAST/BRIGHTNESS/COLOUR
If Picture Mode is set to User you are able to change the following settings. Press to select an option, then press to adjust.

Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.
Brightness Adjust the optical fiber output of the entire picture, it will effect the dark region of the picture.
Colour Adjust the saturation of the colour based on your own preference.
Tint No function

COLOUR TEMPERATURE
In this menu you can change the overall colour cast of the picture.
Press to select Colour Temperature, then press ENTER to enter a sub-menu. Press to select the relevant picture effect.

Cold lncrease the blue tone for the white.
Standard Increase the neutral colours for the white.
Warm lncrease the red colour for the white.

NOISE REDUCTION
In this menu you can filter out and reduce the image noise and improve picture quality. Press to select Noise Reduction, then press ENTER to enter a sub- menu.

Off Select to turn off video noise detection.
Low Detect and reduce low video noise.
Middle Detect and reduce moderate video noise.
High Detect and reduce enhanced video noise.
Default Set as Default.

SOUND MENU

Sound Mode Select your favourite sound mode for each input. Choices are Standard, Music, Movie, Sports and User.
Treble Adjusts the higher frequency of the sound.
Bass Adjusts the lower frequency of the sound.
Balance Control the sound balance between the right and left loudspeaker (earphone).
Auto Volume Adjust the volume corresponding to the input audio level. Options are On and Off.
Surround Simulate surround effect out of stereo audio. Options are On and Off.
S/PDIF Mode If you have connected S/PDIF output to digital home audio system. You can select Auto to output Dolby audio automatically. If channel have this audio channel. Select PCM to output only stereo audio or OFF to switch output off.
AD Switch Turn on the Audio description, you can activate the setting of AD volume. When turn on the audio description, a narrator will describe what is happening on the screen for blind or visually impaired viewers. (Only if available in DTV mode.)
Audio Delay If the audio not is in lib-sync can here you adjust the delay of audio.

TIMER MENU
Press MENU to display the main menu. Press to select TIMER in the main menu. Press to do further adjustments. Press
ENTER to confirm or Press MENU to return.

Auto Sync. Default is time synchronization set to On. If you like to set time manual, select Off.
Clock The time is automatically obtained from the channel transmission and doesn’t have to be set manually.
Time Zone Press to select Time Zone if you like to change to other zone.
Sleep Timer Press to select Sleep Timer. Available Options: Off, 10 min., 20 min., 30 min., 60 min., 90min., 120 min.,180 min. and 240 min.
Auto Standby This function allows you to set the automatic shutdown of your TV. Choose between 3H, 4H, 5H or Off to disable this function.
No Signal If source signals are gone or stopped, can Tv switch automatically to standby mode. Options are On and Off.
OSD Timer This function allows you to choose how long the channel list banner is displayed. Choose between 5s, 15s or 30s.

LOCK
Press MENU to display the main menu. Press to enter the Lock menu settings. To enable enter the PIN code (default:0000).
Press to select the options. The following options are available:

Lock System This option allows you to enable or disable the password protection. Press ENTER to set this function On or Off.
Set Password The default password is 0000, to customize the password press ENTER and follow the instruction within the menu.
Block Program This option allows you to protect viewing of one or more channels with an PIN code. Press ENTER to display the channel list and select with the channel you want to be locked. Press YELLOW to lock it. Consider the same procedure to lock other channels if needed.
Parental Guidance Press ENTER to enter and set the age for suitable programmes for children, then press .

OPTION MENU

Language Select the Menu language of your choice. The default setting is English. Press to select the menu
language.
Audio Languages Press to select Primary for main audio track or Secondary next audio channel if first is not available. Press to select your chosen Audio Language, then press ENTER.
Subtitle Select to switch On or Off for displaying subtitles on screen if available.
Subtitle Language Press to select your chosen Subtitle Language, then press ENTER to select.
Hearing Impaired If you like to have extra subtitles support for hearing impaired user then select this function to On.
Aspect Ratio Change in this option the picture format from displayed video on the screen. Press ENTER to select. Auto, 16:9, 4:3, Zoom 1, Zoom 2.
Country Display the selected country selected in installation.
Environment Press ENTER to select between HOME or STORE modes. In Store mode will it display an information banner on screen.
Energy Saving Show or to select energy saving status. If set to Off, it allows you to adjust some screen levels with use high power consumptions.
Health Remind Press ENTER to select between On or Off modes. In will it display an information after some time on screen.
HDMI CEC See Next chapter 5.7.1
Power On Logo Press ENTER to select between On or Off modes. To display boot logo after switch TV to On.
Default Press ENTER and PIN to restore all settings back to default. Selection can be made to keep current channel list or delete this as well.
Installation Guide This option allows you to perform the First Installation again. Select Start pressing ENTER. Now you will reset all the settings contained in the main menu and deleted all installed channels. TV will go back to First Time Installation. See chapter 3.
Software Version Find here the details of the installed software version.
Software Update (USB) If a new software release for this model is available on our website and you have copied the unzipped file to an empty USB device, formatted in FAT32, you can upgrade the system software of this TV. After successfully update a message appears on screen. Power off by removing the main power connector. Remove USB device and power ON.

NOTE: NEVER disconnect the USB device from the TV, the TV from the main or switch OFF power during the update procedure. It can damage your device and warranty will void!

HDMI CEC

HDMI _CEC Select this item and Press ENTER. Press to turn the HDMI CEC control On or O
ARC Press t u to turn the Audio Return Channel On or Off.
Auto Standby Press to turn on this feature. When finished turn off your TV. The connected device will turn o automatically.
Auto Power On Press to select this option. When you switch On connected device it will turn on the Tv automatically.
Device List Press ENTER to open the main menu of connected HDMI device(s).

MEDIA

Some USB storage devices may not be compatible to operate smoothly with this TV.
Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer’s responsibility.
For large file sizes, the loading speed may be slightly longer.
The recognition speed of a USB storage device may depend on each device.
When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode otherwise the USB storage device or the files stored in it may be damaged.
Please use only a USB storage device which is formatted in FAT32, NTFS (playback only) file system provided with the Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized.
For Software Updates and Database functions it is recommended to use USB-Sticks (keys) in FAT32.
When using a USB Hard Disk Drive which is not powered independently, ensure its power does not exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull out the USB Hard Disk and restart the TV system.
An “Unsupported File” message will be displayed if the file format is unsupported or the file is corrupted.
FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
This TV may not support some multimedia files changed and upgraded as the change of the encoding format or other technical aspects advances.
Please refer to chapter 9. Appendix for a list of supported file formats for USB playback.

USB MENU
Press SOURCE and select Media or press DMP button.. You can view movie, music, photo and text files from your USB storage devices. Connect a USB storage device to the USB input terminal and select the types of media on the home page: Movie, Music, Photo and text. Press ENTER, the screen will show the connected USB device, press ENTER again to view the file folders and files. Press to select a folder, press ENTER to open the folder and select the files. Highlight the one you want to play or watch or press directly to start playing directly. Press to stop playing and return to upper lever folder. Continuously press
EXIT to go back to upper level folder. Repeat again to select and play another media type.

NOTE: By choosing one of the three media types, for example Movie, the folders inside will display only video files and no other formats

PLAY MUSIC
During playback, press INFO or ENTER to display/exit the menu bar. Press the USB control buttons on the remote control to do relevant operations.
Play & Pause/Stop/Prev./Next
Press to play or pause the playback. Press to stop playing. Press to play the previous or the next video file. Press INFO and use to highlight the corresponding icon on the control bar, then press ENTER. The TV will response accordingly

Fast Reverse/Fast Forward
Press and hold for seconds to draw the playing progress as your desire, then press u2 to start the playing from the new position.
Play Mode Highlight the corresponding icon and press ENTER to switch to another play mode.
Information Highlight the corresponding icon and press ENTER to view the information of the playing video.
Zoom in/out Highlight the button and press ENTER to change the display mode.

PLAY MUSIC
Press INFO or ENTER to display/exit from the menu bar. Press the USB control buttons on the remote control to do relevant
operations.

Play & Pause/Stop/Previous/Next
Press to play or pause the playback. Press to stop playing. Press to play the previous or the next music file. Press to highlight the corresponding icon on the control bar, and then press ENTER. The player will response accordingly.

Fast Forward/Fast Reverse
Press and hold for seconds to draw the playing progress as you wish, then press on the remote control to start playing from the new position.
Repeat Highlight the icon and press ENTER. You can select 3 different modes: None to disable the function, 1 to
repeat one track only and All to repeat the entire list once it is finished.
Information Highlight the icon and press ENTER to check the information of the playing music.

NOTE:

If one (or more) file(s) of the play list is selected, the buttons will play only selected files.
This menu only shows supported files.
Files with other file extensions are not displayed, even if they are saved on the same USB storage device.
An over-modulated mp3 file may cause some sound distortion during playback.
This TV supports lyrics display (in English). The maximum number of characters per line is 48.
The file name of music and lyrics must be the same in order to display lyrics while the music is playing.
If you want to show the associated lyrics on the screen with the music, you must store these in the same folder using the same file name with “.Irc” file extensions

BROWSE PHOTOS
Press during viewing INFO or ENTER to display/exit from the menu bar. Press the USB control buttons on the remote control to do relevant operations.

Play & Pause/Stop/Previous/Next
Press to play or pause the playback. Press to stop playing. Press to show the previous or the next picture. Press to highlight the icon on the control bar, and then press ENTER. The TV will response accordingly.
Repeat Highlight the icon and press ENTER. You can select 3 different modes: None to disable the function, 1 to repeat one track only and All to repeat the entire list once it is Finished.
Info Highlight the button and press ENTER to check the information of the shown photo.
Rotate Highlight the icon in the menu bar and press ENTER to rotate the picture 90 degrees clockwise or counter clockwise.
Zoom In/Zoom Out Highlight the icon on the menu bar and press ENTER to zoom in or zoom out of the image.
Move View When the image is magnified, use this function for convenient check. Highlight this icon, press ENTER, then press to move the image.

NOTE: The move function is only available when the image is enlarged.

BROWSE TEXT DOCUMENTS
Press to select Text in the main menu. Then press to select the drive disk you choose to watch and ENTER to enter. Select the file you want to display by using and confirm with OK. Quit step by pressing ENTER. Press to select return and go back to previous menu.

SOFTWARE UPDATE VIA USB
From time to time you can check if there is an improved software version available. This can be viewed and downloaded from our website www.strong- eu.com. Search the model number on our website’s service support section. If there is an improved software version you can download the file and copy it to the root of a USB device. Then press button to select Software Update (USB) from the Option menu on your TV. Plug your USB device into the USB slot and press ENTER to update the respective software. Confirm with Yes using . When the update is completed, remove the USB stick, disconnect your device from the main power supply and plug in again.

TROUBLESHOOTING

There maybe various reasons for abnormal operation of your TV set. Check your TV set according to the general procedures shown below. Additionally, we strongly recommend reading the detailed troubleshooting of your TV set in the full user manual available on our website www.strong-eu.com. If your TV set does not work properly after checking the general and detailed troubleshooting, please contact your dealer, the local Service Hotline, or send an email to our support via www.strong- eu.com. DO NOT try to open or disassemble your TV set. It may cause a dangerous situation and the warranty will be void.

Problem	Possible cause and solution
The LED/Standby indicator does not light up

Check whether the power connector is completely plugged at the TV and into power socket.
Make sure that the switch on multipoint connectors is switched ON as well.
The electrical outlet may be damaged.
STBY LED is defective.

No Signal|

The TV is not connected to a signal source (DVB-C, DVB-S/S2 or DVB-T/T2) or the antenna (terrestrial or satellite antenna) is maybe not aligned correctly respectively the according connection and distribution equipment might show malfunction, incompatibility or defectives.
DVB-T/T2: Active antennas need antenna power switched ON or external power connected. Antenna is maybe out of digital signal reception in your area. Check reference from service providers about coverage.
DVB-S/S2: Incorrect values of some tuner parameters (e.g. one or some channel(s) changed to another transponder or are no longer emitted). Incorrect values of LNB parameters.

The picture and sound remain frozen, or macro blocks or similar distortion are visible on the screen.| DVB-S/S2,DVB-T/T2: The reception signal is too weak or disturbed by electromagnetic, high-frequency, or other interference signals. DVB-T/T2 : Disturbances caused by signal reflections.

DVB-C, DVB-S/S2: The connection cables at the signal source are too long (too high attenuation). DVB-T/T2, DVB-S/S2: The antenna is not properly adjusted or got misaligned after storm etc.

Any other reception or signal related problems|

Generally cables might have loosened. Moisture might have entered into cables or connectors. There is heavy rain or heavy storm at present (DVB-S/S2 and -T/T2). Check the cable connections. DVB-S/S2 and -T/T2: Check all equipment connected between the reception point and the TV.
Wait until heavy rain/thunderstorm passed. If no solution ask a local satellite specialist for advice. DVB-S/S2: The satellite dish is NOT aligned to the (correct) satellite(s). Ask a local satellite specialist for advice.
DVB-S/S2: Satellite dish is too small. Trees or buildings are in path. Ask a local satellite specialist for advice.
DVB-S/S2: Signal is too strong, maybe need to be atennuated. Ask a local satellite specialist for advice.

No colour|

Devices are not properly connected (scart, RCA sockets) or wrong/bad cables are used.
Adjust the saturation.
Switch TV on another channel. It is possible that the current programme is broadcast in black and white.

No picture, normal sound|

Adjust the brightness and contrast
Radio channel is tuned to or the programme is not transmitting Video signals or another broadcasing interference/failure.

Problem	Possible cause and solution
Normal picture, no sound

Press the volume up button to increase the volume level.
Audio is muted, press to restore the sound.
If external devices are used to loop the sound through, make sure to select correct sources and correct sound mode, for details also check advices in User Manuals from connected devices
Maybe a channel w/o audio is tuned to (demo) or the programme is not transmitting audio signals or there is some other transmission interference/failure.

Playback of video is causing picture

freeze/macro blocks or similar distortion, especially on HD

content.

| Read/write speed of your USB device could be too low. Make sure to use a USB storage device with sufficient speed and space. Pen drives (USB sticks) may not support sufficient speed.
The remote control does not work|

Change the batteries. If you’re using rechargable ones take care to use such with low self-discharge
The batteries are not installed correctly or the types have been mixed
IR Sensor is blocked or maybe interfered from bright light

The TV switches off after a certain time| Switch ON the TV and check settings for automatic STBY function, by default the TV switches OFF after 4 hours to fulfil European low power regulations and help you to save energy.

NOTE : If the problem persists after these solutions, please contact your local support centre or send a support mail via our website www.strong- eu.com.

SPECIFICATIONS

Audio: 32”: 5W
Audio Output : 40”: 8W

Video

DVB-T : Reception range: VHF (174MHz ~ 230MHz), UHF (474MHz ~ 862MHz)
Input impedance :75Ω
Channel Bandwidth : 7MHz/8MHz
Modulation : DVB-T: COFDM 2K/8K QPSK,16QAM,64QAM
DVB-S/S2: QPSK ,8PSK
DVB-T2 : QPSK,16QAM,64QAM,256QAM
DVB-C : 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
Video System : MPEG-2 MP@ML, MPEG-2 MP@HL, H.2 Main/Main- 10 profile, @L4.1,Support 8-bit/10-bit color depth, 1920×1080@60fps
Sound System : MPEG-1 layer 1/2
System : DTV: DVB-T2, DVB-S2, DVB-C, DVB-T, DVB-S
ATV: PAL/SECAM/ NTSC
AV : PAL, NTSC

Connectors 32”

1x ANT IN 1x SAT IN
2x HDMI
1x USB
1x S/PDIF (optical)
1x AV IN
1x COMMONINTERFACE (CI)

Connectors 40”

1x ANT IN 1x SAT IN
3x HDMI
2x USB
1x S/PDIF (optical)
1x AV IN
1x COMMONINTERFACE (CI)
1x Headphones

General Data

Operating voltage : 100 ~ 240 V AC 50/60 Hz
Power consumption : 32″: max. 55W 40″: max. 74W
Operating temperature : 5 °C ~ +35 °C
Storage temperature: -15 °C ~ +45 °C
Operating humidity: 0% ~ 89% RH, non-condensing
Storage humidity : 0% ~ 85% RH, non-condensing
Dimensions (WxHxD) in mm : 32”: 732.5 x 228.9 x 487.9 mm 40”: 904.3 x 229.1 x 569.7 mm
Dimensions (WxHxD) in mm (without stand) : 32”: 732.5 x 80.6 x 434.7 mm 40”: 904.3 x 80.3 x 516 mm
Net-weight : 32”: 3.7 kg 40”: 5.4 kg