Soundcore Boom 2 SE Bluetooth Speaker User Manual
- June 15, 2024
- Soundcore
Table of Contents
Soundcore Boom 2 SE Bluetooth Speaker User Manual
At a Glance
Charging
Charging Your Speaker
- Use a certified USB-C cable and charger to prevent any damage.
Charging External Devices
- Use this speaker as a power bank to charge your portable devices or accessories.
Powering On / Off
This speaker will automatically power off after 20 minutes of no audio input. You can also set an auto-power-off time in the soundcore APP.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select
“soundcore Boom 2 SE” from the Bluetooth list to connect.
- To re-enter Bluetooth pairing mode, press the Bluetooth button once.
- This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
- Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
Two identical soundcore speakers can pair with each other for stereo sound.
Both speakers can play the same audio (one as the left channel and the other
as the right channel). With one speaker connected to a smartphone, press and
hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing
mode. To exit TWS mode, press and hold the Bluetooth button for at least 2
seconds.
PartyCast Mode
With one speaker connected to a smartphone, press the PartyCast button on up
to 100 soundcore speakers with PartyCast functions to synchronize audio and
light. soundcore speakers with PartyCast function can also be connected with
this speaker.
Button Controls
soundcore App
Download the soundcore app to enhance your experience.
Product information: Check the product name and software version, or read
the user manual.
Firmware update: You will be informed once a new version of firmware is
detected when you connect the speaker to the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the
buttons on the speaker.
EQ settings: There are various preset EQ settings you can choose from in
the app to optimize your experience while enjoying different music genres.
- soundcore Signature: Standard EQ mode optimized for well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Balance: No enhancement for high-frequency and low-frequency sounds.
- Xtra Bass: Enhance the low-frequency sound.
- Set auto-power-off time: Set an auto-power-off time. The speaker will automatically power off when the time is up.
- Voice prompt: Mute or restore the voice prompt while powering on/off.
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.
Specifications
Download PDF:Soundcore Boom 2 SE Bluetooth Speaker User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>