dacomex ULTRA-SLIM W80-600F-S Wall Mount TV Stand Instruction Manual
- June 16, 2024
- dacomex
Table of Contents
dacomex ULTRA-SLIM W80-600F-S Wall Mount TV Stand
Product Information
Specifications:
- Product Name: ULTRA-SLIM W80-600F-S WALL MOUNT
- Compatible Screen Size : 37-80 inches
- Manufacturer: DACOMEX
- Address: ZI Buchelay 3000- BP1126 – 78204 Mantes-en-Yvelines cedex France
Product Usage Instructions
Pre-Installation
Before installing the wall mount, ensure that you have all the necessary tools and components provided in the package.
Mounting Process
a. Locate the desired mounting location on the wall.
b. Use a stud finder to find suitable mounting points for secure installation.
c. Attach the wall plate to the wall using appropriate screws and anchors.
d. Securely attach the brackets to the back of your TV or monitor.
e. Lift and hang the TV onto the wall plate, ensuring it is securely in place.
Adjustment and Alignment:
After mounting, adjust the tilt and swivel angles to achieve the desired viewing position.
Safety Precautions:
Ensure that the wall mount is installed on a stable and secure surface to prevent accidents.
FAQ
- Q: Can this wall mount support curved TVs?
- A: The ULTRA-SLIM W80-600F-S WALL MOUNT is designed to support flat-screen TVs within the specified size range.
- Q: What is the weight capacity of this wall mount?
- A: The maximum weight capacity of this wall mount is X pounds. Please refer to the product manual for exact specifications.
INSTRUCTIONS
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. personal injury cine or to contact one cont
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of purchase for a replacement.
HARDWARE
TOOLS
INSTALLATION
MAINTENANCE
Check that the product is secure and safe to use at regular intervals (at least every three months).
Read this manual carefully before using the product, and keep it for any future consultation during the life of your product.
DACOMEX – ZI Buchelay 3000- BP1126 – 78204 Mantes-en-Yvelines cedex France
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>