DAP CDI-160BT CD and Media Player User Guide

DAP CDI-160BT CD and Media Player

Product Information

Specifications

• Product Name: CDI-160BT
• Product Code: D1244
• Intended Use: Professional CD and media player for indoor installation

Product Usage Instructions

• Read and follow the instructions in the user manual before installing, operating, or servicing this product to avoid any liability for damages.
• This device is designed for professional use as a CD and media player for indoor installation only. Any other use is considered incorrect use.
• In this manual, bold lettering is used for all buttons, references to parts of the device, and useful information or tips.
• Unpack the product and check all contents against the provided list.
• If any parts are missing or damaged, contact your Highlite International dealer immediately.
• Refer to the user manual available on www.highlite.com for the latest instructions.

Installation

• Install the CDI-160BT in a suitable indoor location following the guidelines provided in the user manual.

Operating the Device

• Follow the instructions for operating the CD and media player as outlined in the user manual to ensure correct usage.

FAQ

• Q: Where can I find the latest version of the user manual?
• A: You can find the latest version of the user manual on our website www.highlite.com.
• Q: What should I do if any parts are missing or damaged upon unpacking?
• A: Contact your Highlite International dealer immediately to report any missing or damaged parts.

Preface

Thank you for purchasing this DAP product.
The purpose of this user manual is to provide instructions for the correct and safe use of this product.
Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
This user manual contains information concerning:

• Safety instructions
• Intended and non-intended use of the device
• Installation and operation of the device
• Maintenance procedures
• Troubleshooting
• Transport, storage and disposal of the device

Non-observance of the instructions in this user manual may result in serious injuries and damage of property.

©2024 DAP. All rights reserved.
No part of this document may be copied, published or otherwise reproduced without the prior written consent of Highlite International.
Design and product specifications are subject to change without prior notice.
For the latest version of this document or other language versions, please visit our website www.highlite.com or contact us at service@highlite.com.
Highlite International and its authorized service providers are not liable for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss arising from the use of, or inability to use or reliance on the information contained in this document.

Introduction

Before Using the Product
Important
Read and follow the instructions in the user manual before installing, operating or servicing this product.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of the user manual.
You can find the latest version of the user manual on our website www.highlite.com.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer.
Your shipment includes:

• DAP CDI-160BT
• Schuko to IEC power cable (1,5 m)
• 2 wireless antennas
• DAB/FM antenna
• IR remote control
• User manual

Intended Use
This device is intended for professional use as a CD and media player. It can be installed only indoors. This device is not suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.

Text Conventions
Throughout the user manual the following text conventions are used:

• Buttons: All buttons are in bold lettering, for example, “Press the UP/DOWN buttons”
• References: References to parts of the device are in bold lettering, for example: “turn the adjustment handle (05)”. References to chapters are hyperlinked
• 0–255: Defines a range of values
• Notes: Note: (in bold lettering) is followed by useful information or tips

Symbols and Signal Words
Safety notes and warnings are indicated throughout the user manual by safety signs.
Always follow the instructions provided in this user manual.

• DANGER Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.
• WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
• Attention Indicates important information for the correct operation and use of the product.
• Important Read and observe the instructions in this document.
• Electrical hazard
• Provides important information about the disposal of this product.

Symbols on the Information Label
This product is provided with an information label. The information label is located on the bottom plate of the device.
The information label contains the following symbols:

• This device is designed for indoor use.
• This device falls under IEC protection class I.
• This device shall not be treated as household waste.
• Caution: Risk of electric shock. Disconnect input power before opening.
• Warning: This appliance must be earthed.

Safety

Important
Read and follow the instructions in this user manual before installing, operating or servicing this product.

• The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual.

Warnings and Safety Instructions
DANGER
Danger for children

• For adult use only. The device must be installed beyond the reach of children.
• Do not leave any parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within the reach of children. Packaging material is a potential source of danger for children.

DANGER
Electric shock caused by short-circuit
This device falls under IEC protection Class I.

• Make sure that the device is electrically connected to the ground (earth). Connect the device only to a socket outlet with a ground (earth) connection.
• Do not cover the ground (earth) connection.
• Do not let the power cable come into contact with other cables. Handle the power cable and all connections with the mains with caution.
• Do not modify, bend, mechanically strain, put pressure on, pull or heat up the power cable.
• Make sure that the power cable is not crimped or damaged. Examine the power cable periodically for any defects.
• Do not immerse the device in water or other liquids. Do not install the device in a location where flooding may occur.
• Do not use the device during thunderstorms. Disconnect the device from the electrical power supply immediately.

DANGER
Electric shock caused by dangerous voltage inside

• There are areas inside the device where dangerous touch voltage may be present.
• Do not open the device or remove any covers.
• Do not operate the device if the covers or the housing are open. Before operation, check if the housing is firmly closed and all screws are tightly fastened.
• Disconnect the device from the electrical power supply before service and maintenance, and when the device is not in use.

Attention
Power supply

• Before connecting the device to the power supply, make sure that the current, voltage, and frequency match the input voltage, current, and frequency specified on the information label on the device.
• Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the required power consumption of the device.

Attention
General safety

• Do not block the ventilation openings. Without proper heat dissipation and air circulation, the internal components may overheat. This can result in product damage.
• Do not shake the device. Avoid brute force when installing or operating the device.
• If the device is dropped or struck, disconnect the device from the electrical power supply immediately.
• If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it on immediately. Let the device reach room temperature before switching it on, otherwise it may be damaged by the formed condensation.
• If the device fails to work properly, discontinue use immediately.

Attention
For professional use only

• This device must be used only for the purposes it is designed for.
• This device is designed to be used as a CD and media player. Any incorrect use may lead to hazardous situations and result in injuries and material damage.
• This device is not suitable for households.
• This device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage.

Attention
Do not expose the device to conditions that exceed the rated IP class conditions.

• This device is IP20-rated. IP (Ingress Protection) 20 class provides protection against solid objects greater than 12 mm, such as fingers, and no protection against harmful ingress of water.

Requirements for the User

• This product may be used by ordinary persons. Installation and maintenance may be carried out by ordinary persons. Service shall be carried out only by instructed or skilled persons. Contact your Highlite International dealer for more information.
• Instructed persons have been instructed and trained by a skilled person, or are supervised by a skilled person, for specific tasks and work activities associated with the installation, service and maintenance of this product, so that they can identify risks and take precautions to avoid them.
• Skilled persons have training or experience, which enables them to recognize risks and avoid hazards associated with the installation, service, and maintenance of this product.
• Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons include not only users of the product but also any other persons who may have access to the device or who may be in the vicinity of the device.

Description of the Device

The DAP CDI-160BT is a CD and media player and is designed for installation into a 19-inch rack. The device features DAB+, FM, and internet radio, as well as a USB port and Bluetooth 5.3. There are both balanced and unbalanced outputs on the back of the device. The player can be operated using the controls on the front or with the included IR remote control.

Front View

1. Stand-by LED indicator (blue)

2. Stand-by button

3. Infra-red sensor

4. Control buttons

5. Control buttons for the CD player

6. CD slot

7. USB-A connector IN

8. TFT display (2,4 “)

9. Tune/Select control

10. 4 x mounting openings (for installation in a 19-inch rack)
    Back View

11. BT antenna connector

12. RCA analog line-level connectors OUT (Left/Right)

13. Digital connector (coaxial) OUT

14. Digital connector (TOSLINK) OUT

15. DAB/FM wire antenna connector

16. Wi-Fi antenna connector

17. RJ45 LAN connector IN

18. 3-pin XLR balanced connector OUT (Right)

19. 3-pin XLR balanced connector OUT (Left)

20. Power switch ON/OFF

21. IEC power connector IN

Product Specifications

Outputs:

Main outputs| 3
Main output connector| 3-pin XLR / RCA
Playback:

Supported audio files| AAC/AAC+ / FLAC / MP3 / WAV
Supported format| FAT32
Maximum storage size| 512 GB
Media input/output| USB-A
USB type| 2.0
Playback functions| Up (Skip) / Down (Skip) / Play / Pauze / Stop / Folder
Audio Specifications:

THD level| < 0,1 %
Signal-to-noise ratio| > 70 dB
Frequency response minimum| 20 Hz
Frequency response maximum| 20000 Hz
Wireless Specifications:

Bluetooth version| 5.3
FM frequency start| 87 MHz
FM frequency end| 108 MHz
FM antenna impedance| 75 Ω
DAB+ frequency start| 174,928 MHz
DAB+ frequency end| 239,2 MHz
Control and Programming:

Display| TFT
Display size| 2,4 “
Electrical Specifications and Connections:

Power supply| 220–240 V AC 50/60 Hz
Power consumption| 6 W
Power connector IN| IEC
Data connector IN| RJ45
Mechanical Specifications:

Height| 44,5 mm
Depth| 230 mm
Width| 482 mm
Flightcase size| 19 “
Rack units| 1 U
Housing| Aluminum / Metal
Color| Black
Weight| 2,8 kg
---|---
IP rating| IP20 (indoor use only)
Thermal Specifications:

Maximum ambient temperature| 40 °C
Minimum ambient temperature| 0 °C
Included Items:

Included cables| IEC cable
Included remotes| IR remote

Installation

Safety Instructions for Installation
Attention
Make sure that there is enough space for ventilation around the device.

• Do not block the ventilation openings. Without proper heat dissipation and air circulation, the internal components may overheat. This can result in product damage.
• Do not install near equipment that produces heat, for example, amplifiers.

Installation Site Requirements

• The device can be used only indoors.
• The ambient temperature must be in the range 0 and 40 °C.
• The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.

Rack Mounting
The device can be mounted in a standard 19-inch rack. The device requires 1 rack unit (RU) of space, which is 44,5 mm high.
Make sure that the rack is sufficiently secured to prevent it from becoming unstable or falling over.
To mount the device in a two-post rack, follow the steps below:

1. Insert 4 cage nuts in the openings on the rack posts where you want to mount the device.
2. Position the device in front of the rack posts so that the 4 mounting openings (10) on the flanges face the openings on the rack posts with cage nuts.
3. Using a screwdriver, mount the device to the rack posts with 4 screws.

Installation of the Batteries
The device can be operated with an IR remote control. The remote control is included in the delivery.
The remote control is delivered without batteries. It accepts 2 x AAA 1,5 V (alkaline) batteries.
To install the batteries:

1. Press on the battery compartment cover and slide it downwards to open the battery compartment.
2. Insert 2 x AAA 1,5 V batteries into the battery housing. Make sure that you install the batteries with the correct polarity orientation.
3. Close the battery compartment cover.

Connecting to Power Supply

DANGER
Electric shock caused by short-circuit

• The device accepts AC mains power at 220–240 V and 50 Hz. Do not supply power at any other voltage or frequency to the device.
• This device falls under IEC protection class I. Make sure that the device is always electrically connected to the ground (earth).
• Before connecting the device to the socket outlet:
• Make sure that the power supply matches the input voltage specified on the information label on the device.
• Make sure that the socket-outlet has a ground (earth) connection.
• Connect the device to the socket outlet with the power plug.

Setup and Operation

Setup Example

• For complete instructions of the operation of this device, refer to the user manual. You can find the latest version of the user manual on our website www.highlite.com.
• This is a typical setup with 2 streaming devices and 2 active speakers connected through an amplifier to the device.

Connecting the Wireless Antennas
The device is delivered with 2 wireless antennas. The antennas are not connected. To install the antennas:

1. Put the 2 wireless antennas into the BT antenna connector (11) and the Wi-Fi antenna connector (16).
2. Turn the 2 wireless antennas clockwise to tighten them.
3. Make sure that the wireless antennas point up.

Connecting the DAB/FM Wire Antenna

1. Put the DAB/FM wire antenna into the DAB/FM wire antenna connector (12).
2. Unwind the DAB/FM wire antenna to improve the reception.

Connecting the Device to a Router
To make a LAN connection, it is necessary to connect the device to a router.

1. Plug one end of the network cable into an RJ45 connector on the router.
2. Plug the other end of the network cable into the RJ45 LAN connector IN (17) on the device.

Note
If you use a network cable and the DHCP function on the router is activated, it is not necessary to configure the network.

Maintenance

Safety Instructions for Maintenance
DANGER
Electric shock caused by dangerous voltage inside Disconnect the power supply before servicing or cleaning.

Preventive Maintenance
Attention

• Before use, examine the device visually for any defects.
• Make sure that:
• The housing is not damaged.
• The power cable is not damaged and does not show any material fatigue.

Basic Cleaning Instructions
To clean the device, follow the steps below:

1. Disconnect the device from the electrical power supply.
2. Allow the device to cool down for at least 5 minutes.
3. Clean the device with a soft, lint-free cloth.

Attention

• Do not immerse the device in liquid.
• Do not use alcohol or solvents.

Corrective Maintenance

• The device does not contain user-serviceable parts. Do not open the device and do not modify the device.
• Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more information.

Deinstallation, Transportation, and Storage

• Use the original packaging to transport the device, if possible.
• Clean the device before storing (see 6.2.1. Basic Cleaning Instructions on page 13).
• Store the device in the original packaging, if possible.

Disposal
Correct disposal of this product Waste Electrical and Electronic Equipment This symbol on the product, its packaging or documents indicates that the product shall not be treated as household waste. Dispose of this product by handing it to the respective collection point for recycling of electrical and electronic equipment. This is to avoid environmental damage or personal injury due to uncontrolled waste disposal. For more detailed information about recycling of this product contact the local authorities or the authorized dealer.

Approval

• Hereby, Highlite International declares that the device CDI-160BT, product code D1244, complies with Directive 2014/53/EU (RED – Radio Equipment Directive).
• The full text of the EU Declaration of Conformity is available on the respective product page on the website of Highlite International (www.highlite.com).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>