DAP DPS-640 Pendant Speaker User Manual

: June 13, 2024
: DAP

Table of Contents

Introduction
Safety
Description of the Device
Installation and Setup
Troubleshooting
Maintenance
Deinstallation, Transportation and Storage
Disposal
Approval
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

USER MANUAL DPS-640 6,5” 40 W Pendant Speaker
V1
Product code: D6615B – Black, Dé615W — White
Highlite Intemational B.v. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherands

Preface
Thank you for purchasing this DAP product.
The purpose of this user manual is fo provide instructions for the correct and safe use of this product.
Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
This user manual contains information conceming:

Safety instructions
Installation and operation of the device
Intended and non-intended use of the device
Maintenance procedures
Troubleshooting
Transport, storage and disposal of the device

Non-observance of the instructions in this user manual may result in serious injuries and damage of property.
©2023 DAP. All rights reserved.
No part of this document may be copied, published or otherwise reproduced without the prior written consent of Highlite Interational.
Design and product specifications are subject fo change without prior notice.
For the latest version of this document or other language versions, please visit our website www.highlite.com or contact us at service@highlite.com.
Highlite International and its authorized service providers are not liable for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss arising from the use of, or inability fo use or reliance on the information contained in this document.

Introduction

1.1. Before Using the Product
Important
Read and follow the instructions in this user manual before installing, operating or servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual.
After unpacking, examine the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer.
Your shipment includes:

DAP DPS-640 6,5″ 40 W Pendant Speaker
Suspension cable (1 m)
Suspension eyelet
2xcable mounting screw
Cable bracket
Usermanual

1.2. Intended Use
This device is designed fo be used as a conventional or a 70/100 V line pendant speaker. It can be used outdoors. This device is not suitable for households.
Any ofher use, not mentioned under intended use, is regarded as non-infended and incorrect use.
1.3. Text Conventions
Throughout the user manual the following text conventions are used:

References: References to chapters and parts of the device are in bold lettering, for example: “Refer to 2. Safety”, “press the power switch (03)”
0-255: Defines a range of values
Nofes: Note: (in bold lettering) is followed by useful information or tips

1.4. Symbols and Signal Words
Safety notes and warnings are indicated throughout the user manual by safety signs.
Always follow the instructions provided in this user manual.

DANGER| Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
---|---
WARNING| !ndlccies an |rT.7m|n.e.n1Iy hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION| Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
Attention| Indicates important information for the correct operation and use of the product.
Important| Read and observe the instructions in this document.
| Provides important information about the disposal of this product.

1.5 Symbols on the Information Label
This product is provided with an information label. The information label is located on the bottom plate of the device.
The information label contains the following symbols:
This device shall not be treated as household waste.
Read and follow the instructions in the user manual before installing, operating or servicing the device.

Safety

Important
Read and follow the instructions in this user manual before installing, operating or servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual.
2.1. Warnings and Safety Instructions
DANGER
Danger for children
For adult use only. The device must be installed beyond the reach of children.

Do not leave various parts of the packaging (plastic bags, polystyrene foam, nails, efc.) within children’s reach. Packaging material is a potential source of danger for children.

Attention
Speaker load

Make sure that the total wattage of all connected speakers does not exceed the rated wattage of the amplifier.
Make sure that the speaker cable run is appropriate for the total speaker load.

Attention
General safety
Do not shake the device. Avoid brute force when installing or operating the device.
If the device fails fo work properly, discontinue the use immediately.
Attention
This device shall be used only for the purposes it is designed for.
This device is designed fo be used as a conventional or a 70/100 V line pendant speaker. Any incorrect use may lead to hazardous situations and result in injuries and material damage.

This device is not suitable for households.
This device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage.

Attention
Do not expose the device to conditions that exceed the rated IP class conditions.
This device is IP44 rated. IP (Ingress Protection) 44 class means that the device is protected against solid objects greater than 1,0 mm. Water splashed against the enclosure from any direction shall have no harmful effect.
2.2. Requirements for the User
This product may be used by ordinary persons. Maintenance may be carried out by ordinary persons.
Service and installation shall be carried out only by instructed or skilled persons. Contact your Highlite International dealer for more information.
Instructed persons have been instructed and frained by a skilled person, or are supervised by a skilled person, for specific tasks and work activities associated with the installation, service and maintenance of this product, so that they can identify risks and take precautions to avoid them.
Skilled persons have training or experience, which enables them fo recognize risks and fo avoid hazards associated with the installation, service and maintenance of this product.
Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons include not only users of the product but also any other persons that may have access to the device or who may be in the vicinity of the device.

Description of the Device

The DAP DPS-640is an IP-rated 70/100 V line/conventional pendant speaker for low-impedance audio installations. The device can be used in humid environments as well as outdoors.
3.1. Side View

Suspension eyelet
Speaker cover
Speaker grill
3.2. Top View
Line fransformer tap selector
Suspension eyelet threaded opening
4-pin ferminal connector

3.3. Product Specifications

Model:	DAP DPS-640 6,5″ 40 W Pendant Speaker

3.4. Dimensions

Installation and Setup

4.1. Safety Instructions for Installation
WARNING
Incorrect installation can cause serious injuries and damage of property.

Make sure that the ceiling or the overhead structure can hold the weight of the device.
Make sure that the installation location on the ceiling is free of any obstructions and the speaker cables do not come in contact with other objects.

4.2, Installation Site Requirements

The device can be installed on a ceiling or suspended on an overhead structure.
The device can be installed indoors and outdoors. Make sure that the device is not exposed to conditions that exceed the rated IP class conditions.
The device must be installed away from direct sunlight. Prolonged exposure to direct sunlight can cause discoloring of the enclosure.

4.3. Selecting Line Transformer Taps
The device has multiple selectable line transformer taps.
Tumn the line transformer tap selector (04) fo select a line fransformer tap. The available line fransformer taps are: Note:
The line fransformer tap values depend on the type of amplifier connected to the PA system.

Fora 70V amplifier, the line fransformer taps are: 2,5 W/5W /10W /20 W.
Fora 100V amplifier, the line fransformer faps are: 5W / 10W /20 W / 40 W.

For a conventional amplifier, use only the *8 Ω” line transformer tap.
The higher the wattage setting, the higher the volume level of the device.
4.4. Mounting and Setup
CAUTION
Restrict the access under the work area during installation and/or deinstallation.
To install the device, follow the steps below:

Put the speaker cables through the opening in the speaker cover (02) (Fig. 06).
Connect the speaker cables to the device (Fig. 07). See 4.5. Connecting to Amplifier on pages 12-14 for more information.
Use the 2 supplied screws to attach the supplied cable bracket to the device. The cable bracket keeps the cables in place (Fig. 08).
Put the speaker cover (02) on the fop of the device (Fig. 09).
Inserf the suspension eyelet (01) info the suspension eyelet threaded opening (05) and fighten it (Fig. 10).
Fasten the supplied suspension cable to the suspension eyelet (01).

4.5. Connecting to Amplifier
**** Attention
Speaker load

Before connecting the amplifier to the power supply, make sure that the total load of all connected speakers is below the maximum rating of the ampilifier. If the fotal load is higher, it may cause damage to the amplifier and to the speakers.
The fotal load depends also on the current line transformer tap setting. See 4.3. Selecting Line Transformer
Taps on page 9 for more information.
To determine if the settings are cormrect:

Add up the wattage settings of all connected speakers.
Compare the value with the maximum rating of the amplifier. If necessary, disconnect speaker(s).

Connect the device to a 70/100 V amplifier or fo a conventional amplifier. You can also connect multiple speakers o each other.
4.5.1. Connecting to a 70/100 V Amplifier
To use the device with a 70/100 V amplifier, follow the steps below:

Connect one of the (-) connectors on the 4-pin terminal connector (06) of the first device to the COM output of the 70/100 V amplifier.
Connect one of the (+) connectors on the 4-pin terminal connector (08) of the first device to the line transformer tap (70 V or 100 V) of the 70/100 V amplifier.
Connect the other (-) connector on the 4-pin terminal connector (06) of the first device fo one of the (-) connectors on the 4-pin terminal connector (08) of the second device.
Connect the other (+) connector on the 4-pin terminal connector (06) of the first device to one of the (+) connectors on the 4-pin terminal connector (06) of the second device.
Repeat steps 3-4 to connect all devices in a daisy-chain as shown in Fig. 11.

4.5.2, Connecting to a Conventional Amplifier
To use the device with a conventional amplifier, follow the steps below:

Connect one of the (-) connectors on the 4-pin terminal connector (06) of the first device fo the (-) output of the conventional amplifier.
Connect one of the (+) connectors on the 4-pin terminal connector (08) of the first device to the (+) output of the conventional amplifier.
Connect the other (-) connector on the 4-pin terminal connector (06) of the first device fo one of the (-) connectors on the 4-pin terminal connector (08) of the second device.
Connect the other (+) connector on the 4-pin terminal connector (06) of the first device to one of the (+) connectors on the 4-pin terminal connector (06) of the second device.
Repeat steps 3-4 to connect all devices in a daisy-chain as shown in Fig. 12.

Troubleshooting

This tfroubleshooting guide contains solutions to problems which can be carried out by an ordinary person.
The device does not contain user-serviceable parts.
Unauthorized modifications fo the device will render the warranty void. Such modifications may result in injuries and material damage.
Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the solution is not described in the table.

Problem	Probable cause(s)	Solution

The device does not
function at all| Bad connection| Make sure that the connections between the devices are correct
No power to the amplifier| Make sure that the ampilifier is on
Incorrect settings| Make sure that the correct line transformer taps are selected
Examine if the amplifier is compatible with the device
No sound| Incorrect polarity of the connections| Examine if the polarity of the
connections between the devices is
correct

Maintenance

6.1. Preventive Maintenance
Attention
Before use, examine the device visually for any defects.
Make sure that:

There are no deformations on the housing.
The device is rigidly mounted fto the wall.

6.1.1. Basic Cleaning Instructions
Clean the device with asoft, lint-free cloth.
Attention

Do notimmerse the device in liquid.
Do not use alcohol or solvents.

6.2, Corrective Maintenance

The device does not contain user-serviceable parts. Do not open the device and do not modify the device.
Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more information.

Deinstallation, Transportation and Storage

7.1. Instructions for Deinstallation
WARNING
Incorrect deinstallation can cause serious injuries and damage of property.

Disconnect power supply before deinstallation.
Always observe the national and site-specific regulations during deinstallation of the device.
Wear personal protective equipment in compliance with the national and site-specific regulations.

7.2. Instructions for Transportation

Use the original packaging fo transport the device, if possible.

Always observe the handling instructions printed on the outer carton box, for example: “Handle with care”, This side up”, “Fragile”.

7.3. Storage

Clean the device before storing. Follow the cleaning instructions in chapter 6.1.1. Basic Cleaning Instructions on page 15.
Store the device in the original packaging, if possible.

Disposal

Correct disposal of this product
**** Waste Electrical and Electronic Equipment
This symbol on the product, its packaging or documents indicates that the product shall not be treated as household waste. Dispose of this product by handing it to the respective collection point for recycling of electrical and electronic equipment. This is to avoid environmental damage or personal injury due fo uncontrolled waste disposal. For more detailed information about recycling of this product contact the local authorities or the authorized dealer.