Soundcore Q20i Noise Cancelling Headphones User Manual
- June 15, 2024
- Soundcore
Table of Contents
Soundcore Q20i Noise Cancelling Headphones User Manual
SUPPORT
Please visit www.soundcore.com/support for
more information.
APP
Download the soundcore app to switch ambient sound modes, adjust EQ settings, update firmware, and explore more. If your headphones cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.
WEARING
Wear the headphones with the “L” logo on your left ear and the “R” logo on
your right ear. Adjust the length of the headband for a comfortable fit.
CHARGING
Fully dry off the headphones and USB-C charging port before charging. Do not
turn on your headphones while charging. Use a certified USB-C charging cable
and charger to prevent any damage.
POWERING ON & PAIRING
Press and hold the multi-function button for 3 seconds to power on. The headphones will automatically enter Bluetooth pairing mode when connecting for the first time. Select soundcore Q20i * on your device’s Bluetooth list when connecting for the first time. The device name may vary depending on the region.
MANUAL PAIRING
To manually enter Bluetooth pairing mode, after powering on the headphones,
press the multi-function button twice to pair.
DUAL CONNECTIONS
The headphones can connect with two devices at the same time. When already
connected to one device, press the multi-function button twice to pair with
another device.
BUTTON CONTROLS
- ×1: Press once
- ×2: Press twice
- 2s: Press and hold for 2 seconds
- 1s: Press and hold for 1 second
BUTTON CONTROLS
AMBIENT SOUND
Active Noise Cancellation (ANC): Reduce
unwanted background noise.
Transparency: Stay aware of your surroundings while listening to music.
WIRED LISTENING
Play audio on an external device by plugging in a 3.5mm AUX cable. Wired
listening will automatically turn off Bluetooth mode. When using an AUX cable,
the ANC function will be disabled.
RESET
You might need to reset your headphones if you experience connectivity or function issues. Delete the pairing history from your Bluetooth device first. Press and hold the volume up and multi-function button simultaneously for 5 seconds until the LED flashes blue twice.
LED LIGHT GUIDE
FIRMWARE UPDATE
You will be informed once the new version of firmware is detected when you
connect the headphones to the app. Ensure the headphones are powered on and
connected to a device until the firmware update is complete. During the
update, avoid any usage and ensure stable access to the Internet.
SPECS
Specifications are subject to change without notice.
Download PDF:Soundcore Q20i Noise Cancelling Headphones User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>