Midea MDRF692FIE 4 Door Refrigerator User Manual

Midea MDRF692FIE 4 Door Refrigerator

Product Information

Specifications

• Product model: MDRF692FIE
• Rated Voltage/Frequency: 220-240V~/50Hz
• Rated Current: 1.9A
• Total Volume: 516L
• Fresh Food Storage Compartment Volume: 347L
• Four-star Compartment Volume: 169L
• Freezing Capacity: 12kg/24h
• Temperature Rise Time: 7h
• Overall Dimension (W x D x H): 833x653x1898mm
• Wireless Network module model: MWB-S-WB01
• Standard Antenna Type: Printed PCB antenna
• Frequency Band: 2400-2483.5 MHz
• Operating Temperature: 0 ~ 85 Celsius
• Operation humidity: 10%~85%
• Power Input: DC5V/500mA
• Maximum Transmission power: 100mm
• Required space for air circulation: >100mm

Product Usage Instructions

Leveling Feet
To avoid vibration, the unit must be leveled. If required, adjust the leveling screws to compensate for the uneven floor. The front should be slightly higher than the rear to aid in door closing. Leveling screws can be turned easily by tipping the cabinet slightly. Turn the leveling screws counterclockwise to raise the unit, clockwise to lower it.

Leveling Doors
When leveling doors, ensure proper alignment using hinge grommets and fastener rings. The number of fasten-rings you will need to insert depends on the gap. Use pliers to adjust as necessary.

Moving the Appliance

1. Remove all food from inside the appliance.
2. Pull the power plug out, insert and fix it into the power plug hook at the rear or on top of the appliance.
3. Tape parts such as shelves and the door handle to prevent them from falling off while moving the appliance.
4. Move the appliance with more than two people carefully. When transporting the appliance over a long distance, keep the appliance upright.
5. After installing the appliance, connect the power plug to a socket to switch on the appliance.

Changing the Light
To change the light, follow the instructions provided in the manual specific to your model.

FAQ

• Q: How often should I clean the refrigerator?
  A: It is recommended to clean the refrigerator at least once a month to maintain optimal performance and hygiene.

• Q: Can I adjust the temperature settings?
  A: Yes, most models allow you to adjust the temperature settings for different compartments. Refer to your manual for specific instructions.

Warning notices:
Before using this product, please read this manual carefully and keep it for future reference. The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or manufacturer for details. The diagram above is just for reference. Please take the appearance of the actual product as the standard.

Download the app & activate the product

THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers safely.

SPECIFICATIONS

Operation humidity: 10%~85%

Power Input| DC5V/500mA Maximum Transmission power: <20dBm

PRODUCT OVERVIEW

Names of components

Normal type

1. LED Lamp
2. Door Tray
3. Glass Shelf
4. Variable Zone
5. Upper freezer drawer
6. Lower freezer drawer
7. Fruit and vegetable box

ATTENTION
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.

PRODUCT INSTALLATION

Install Instruction

For refrigerating appliances with climate class

• Depending on the climate class, this refrigerating appliance is intended to be used at ambient temperature ranges as specified following table.
• The climate class can be found on the rating plate. The product may not operate properly at temperatures outside of the specific range.
• You can find the climate class on the product label.

Effective temperature range
The product is designed to operate normally in the temperature range specified by its class rating.

Dimensions and Clearances
Too small of a distance from adjacent items may result in the degradation of freezing capability and increased electricity costs. Allow over 100 mm of clearance from each adjacent wall when installing the appliance.

ATTENTION
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.

Space requirement diagram (when the door is open and when the door is closed)

Width

| Overall Height|

Depth

| Depth without door| Width doors open 135o| Depth doors open 135o
---|---|---|---|---|---
A| B| C| C1| E| D
833| 1898| 653| 570| 1400| 1000

Notice: All dimensions in mm

Leveling feet

• To avoid vibration, the unit must be leveled.
• If required, adjust the leveling screws to compensate for the uneven floor. The front should be slightly higher than the rear to aid in door closing. Leveling screws can be turned easily by tipping the cabinet slightly.
• Turn the leveling screws counterclockwise to raise the unit, clockwise to lower it.

Leveling doors

• Precautions before operation:
  • Before the operation of accessories, it shall be ensured that the refrigerator is disconnected from power.
  • Before adjusting the door, precautions shall be taken to prevent any personal injury.
• Schematic diagram of leveling the door body:
• Raise the lower door up to the level of the higher door;
• Insert the supplied fastener ring by using a plier in the gap between the hinge-grommet and the lower hinge. The number of fasten-rings you will need to insert depends on the gap.

Moving the appliance

1. Remove all food from inside the appliance.
2. Pull the power plug out, insert and fix it into the power plug hook at the rear or on top of the appliance.
3. Tape parts such as shelves and the door handle to prevent them from falling off while moving the appliance.
4. Move the appliance with more than two people carefully. When transporting the appliance over a long distance, keep the appliance upright.
5. After installing the appliance, connect the power plug to a socket to switch on the appliance.

ATTENTION

Precautions before operation:
Before making changes the refrigerator must be disconnected from power. precautions should be taken to prevent any personal injury.

Changing the light
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service agent, or a similarly qualified person.

ATTENTION
This product contains a light source of energy efficiency class (G).

Connecting the appliance
After installing the appliance, connect the power plug into a socket outlet.

ATTENTION
After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you put food into the appliance. If you add food before the appliance has cooled completely, your food may spoil.

Tips for energy saving

• Do not place the appliance near cookers, radiators or other heat sources. If the ambient temperature is high, the compressor will run more frequently and for longer, resulting in increased energy consumption.
• Ensure that there is sufficient ventilation at the base of the appliance, on the sides of the appliance and at the back of the appliance. Never cover ventilation openings.
• Please also observe the spacing dimensions in the chapter “Installation”.
• The arrangement of drawers, shelves and racks as shown in the illustration offers the most efficient use of energy and should therefore be retained as far as possible. All drawers and shelves should remain in the appliance to keep the temperature stable and save energy.
• To obtain a larger storage space (e.g. for large refrigerated/frozen goods), the middle drawers can be removed. The top and bottom drawers and shelves should be removed last if necessary.
• An evenly filled refrigerator/freezer compartment contributes to optimal energy use. Therefore, avoid empty or half-empty compartments.
• Allow warm food to cool before placing it in the refrigerator/freezer. Food that has already cooled down increases energy efficiency.
• Allow frozen food to defrost in the refrigerator. The coldness of the frozen food reduces the energy consumption in the refrigerator compartment and thus increases the energy efficiency.
• Open the door only as briefly as necessary to minimise cold loss. Opening the door briefly and closing it properly reduces energy consumption.
• Setting the temperature no colder than necessary contributes to optimal energy use. The optimum temperature in the refrigerator is +7°C. It should be measured as far forward as possible in the top compartment of refrigerators.
• The door seals of your appliance must be perfectly intact so that the doors close properly and energy consumption is not increased unnecessarily.

OPERATION INSTRUCTIONS

Control panel

ATTENTION

• The actual control panel may differ from model to model.
• The control panel will turn off automatically for energy saving.

Display

• When the refrigerator, the display screen will display for 3 seconds. Meanwhile, the starting-up bell rings, and then the screen enters the normal display of the operation.
• When the error occurs, the display shows the error code (see next page); during normal running, the display shows the set temperature of the refrigerating chamber or freezing chamber.
• Under normal circumstances, if there is no operation on the display panel or door opening action within 30s, then the display is locked, and the logo lights up.

Lock/unlock

• In the unlocked state, long press the lock button for 3 seconds, enter the lock state, the logo lights up and the buzzer sounds, which means the display panel is locked, at this time, button operation cannot be implemented;
• In the locked state, long press the lock button for 3 seconds, enter the unlocked state, The logo lights off and the buzzer sounds, which means the display panel is unlocked, at this time, button operation can be implemented;

The temperature setting of the refrigerating chamber

• Press the temperature zone selection button to choose the setting temperature zone of the refrigerating chamber, and then press or adjust the setting temperature of the refrigerating chamber. The temperature\ setting range for the refrigerating chamber is 2°C ~ 8°C.

Temperature setting of freezing chamber

• Press the temperature zone selection button to choose the setting temperature zone of the freezing chamber, and then press or adjust the setting temperature of the freezing chamber. The temperature setting range for the freezing chamber is -24°C~-16°C.

Temperature setting of variable temperature chamber
Press the Variable temperature button to adjust the setting temperature of the chamber, the adjusting range is Fruit/vegetable, drink, and chilled.

• Fruit/vegetable suitable for storing all kinds of fruits and vegetables;
• Drink suitable for storing dry goods and drinks;
• Meat is suitable for a small amount of meat stored for 1-2 days.

Mode setting
Press the mode selection button to choose super cooling mode super freezing mode or auto mode.

Super cooling mode
The super cool icon lamp is lit. The temperature of the refrigerating chamber is set to 2℃ and automatically exits the super cooling mode after 6h. After exiting the super cooling mode, the temperature of the refrigerator will automatically return to the temperature set before the super cooling mode. At this time, the super cool icon lamp is off.

Super freezing mode
The Icon lamp is lit. The temperature of the freezing chamber is set to -24℃ and automatically exits the super cooling mode after 24h. After exiting the super-freezing mode, the temperature of the freezing chamber will automatically return to the temperature set before the super-freezing mode. At this time, the Icon lamp is off.

Auto mode
The icon lamp is lit. The temperature of the refrigerating chamber is automatically set to 5℃ and the temperature of the freezing chamber is automatically set to -18℃. When exiting the Auto mode, the temperature of the refrigerator and freezing chamber will automatically return to the temperature set before the auto mode.

ATTENTION
The Super-freezing function is designed to maintain the nutritional value of the food in the freezer. It can freeze the food in the shortest time. If a large amount of food is frozen at one time, it is recommended that the user turn on the Super-freezing function and put the food in. At this time, the freezing speed of the freezer compartment is increased, which can quickly freeze the food, effectively lock the nutrition of the food, and facilitate storage.

Storage upon power failure
In case of power failure, the instant working state will be locked and maintained till re-electrification.

Opening warning and alarm control

• When the refrigerator door is opened, a prompt sounds. If the door has not closed after two minutes, the buzzer will sound and then every second until the door closes. Press any button to cancel the beep alarm.
• Disable the door opener: Press and hold the keys at the same time for 3 seconds to disable or set the door opener sound.
• Disable the door opening alarm sound: Not possible.

Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though the refrigerator may still have a cold storage function with the following faults, the user shall contact a maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.

Tips on storing food

Freezer compartment

• The freezer is designated for the storage of food frozen at very low temperatures, long-term storage of frozen food, and for the production of ice.
• Only use the shelves in the door of the freezer to store frozen food, not for storing hot food designated for freezing.
• Do not put fresh and frozen food next to each other. The frozen food may thaw.
• When freezing fresh food (such as meat, fish or chopped meat), cut them into parts that can be used at the same time.
• Storing frozen food: instructions are usually stated on the packages, which must be followed. If there is no information on the packaging, food should not be stored for longer than three months from the date of purchase.
• When purchasing frozen food, make sure that it was frozen at a suitable temperature and that the packaging is not damaged.
• Frozen food should be kept in suitable packages to retain its quality and should be returned to the freezer compartment as soon as possible.
• If a package of frozen food shows moisture or abnormal bulging, it is probable that it was stored at the wrong temperature and the content is spoiled.
• The storage period for frozen food depends on the room temperature, the thermostat setting, the frequency of opening the door of the freezer, the type of food, and the time of transporting the product from the shop to the household.

Always follow the instructions printed on the packaging and never exceed the maximum storage time stated on the package.

Cooling compartment

• To reduce moisture and subsequent ice build-up, never put liquid into the refrigerator in unsealed containers. Frost tends to concentrate in the coolest parts of the evaporator. Storing uncovered liquids results in a more frequent need for defrosting.
• Never put warm foods in the refrigerator. These should first cool down at room temperature and then be placed to ensure adequate air circulation in the refrigerator.
• Foods or food containers should not touch the back wall of the refrigerator because they could freeze to the wall. Do not keep regularly opening the door of the refrigerator.
• Meat and clean fish (packed in a package or plastic foil) can be placed in the refrigerator, which can be used in 1–2 days.
• Fruit and vegetables without packaging can be placed in the part designated for fresh fruit and vegetables.

Recommended Temperature
The optimal temperature setting for food storage:

• Fridge: 4 °C
• Freezer: -18 °C

ATTENTION
The optimal temperature setting of each compartment depends on the ambient temperature. The above optimal temperature is based on the ambient temperature of 25 °C.

Order

| Compartments TYPE| Target storage temp. [°C]|

Appropriate food

---|---|---|---
1

2

3

4

5

6

7

8

9

| Fridge

(**)-Freezer

***-Freezer

**-Freezer

*-Freezer

0-star

Chill

Fresh food

Wine

|

+2 ~ +8

£-18

£-18

£-12

£-6

-6 ~ 0

-2 ~ +3

0 ~ +4

+5 ~+20

| Eggs, cooked food, packaged food, fruits and vegetables, dairy products, cakes, drinks, and other foods are not suitable for freezing.

Seafood (fish, shrimp, shellfish), freshwater aquatic products, and meat products (recommended for 3 months, the longer the storage time, the worse the taste and nutrition), suitable for frozen fresh food.

Seafood (fish, shrimp, shellfish), freshwater aquatic products, and meat products (recommended for 3 months, the longer the storage time, the worse the taste and nutrition), suitable for frozen fresh food.

Seafood (fish, shrimp, shellfish), freshwater aquatic products, and meat products (recommended for 3 months, the longer the storage time, the worse the taste and nutrition), suitable for frozen fresh food.

Seafood (fish, shrimp, shellfish), freshwater aquatic products, and meat products (recommended for 3 months, the longer the storage time, the worse the taste and nutrition), suitable for frozen fresh food.

Fresh pork, beef, fish, chicken, some packaged processed foods, etc. (Recommended to eat within the same day, preferably no more than 3 days).

Partially encapsulated processed foods (non-freezable foods).

Fresh/ frozen pork, beef, chicken, freshwater aquatic products, etc. (7 days below 0°C and above 0°C is recommended for consumption within that day, preferably no more than 2 days). Seafood (less than 0 for 15 days, it is not recommended to store above 0°C.

Fresh pork, beef, fish, chicken, cooked food, etc. (Recommended to eat within the same day, preferably no more than 3 days)

Red wine, white wine, sparkling wine, etc.

ATTENTION
Please store different foods according to the compartments or target storage temperature of your purchase.

APP SETUP AND OPERATION

Download the SmartHome App

• On an app market (Google Play Store, Apple App Store), search for “SmartHome” and find the SmartHome app.
• Download and install it on your phone. You can also download the app by scanning the QR code below.

Register and log in
Open the SmartHome app, and create a new account to start (you can also register through a third-party account). If you already have an existing account, use the account to log in.

Connect your devices to SmartHome

1. Please make sure your mobile phone is connected to a wireless network. If it is not, go to Settings and enable wireless networks and Bluetooth.
2. Please power on your devices.
3. Open SmartHome App on your phone.
4. If a message of “Smart devices discovered nearby” appears, click to add.
5. If no message appears, select “+” on the page and select your device in the list of nearby devices available. If your device is not listed, please add your device manually by the device category and device model.
6. Connect your device to the wireless network according to the instructions on the app. If the connection fails, please follow the instructions provided by the app to continue with the operation.

NOTE

1. Make sure your devices are powered on.
2. Keep your mobile phone close enough to your device when you are connecting your device to the network.
3. Connect your mobile phone to the wireless network at home, and make sure you know the password of the wireless network.
4. Check if your wireless router supports a 2.4 GHz band and turn it on. If you are not sure whether the router supports a 2.4 GHz band, please contact the router manufacturer.
5. The device cannot connect to the wireless network that requires authentication, and it usually appears in public areas such as hotels, restaurants, etc. Please connect to a wireless network that does not require authentication.
6. Turn off the WLAN+ (Android) or WLAN Assistant (iOS) function of your mobile phone when connecting your device to the network.
7. In the case that your device connected to a wireless network before but needs to reconnect, please click “+” on the app Home page, and add your device again by the device category and model according to the instructions on app.

CLEANING AND MAINTENANCE

Defrosting
The refrigerator is made based on the air-cooling principle and thus has an automatic defrosting function. Frost formed due to change of season or temperature may also be manually removed by disconnection of the appliance from power supply or by wiping with a dry towel.

Cleaning of door tray

• According to the direction arrow in the figure below, use both hands to squeeze the tray, and push it upward, then you can take it out.
• After washing the tray having been taken out, you can adjust its installing height under your requirement.

Cleaning of glass shelf

• As the innermost part of the refrigerator liner where contacting the shelves has a backstop, you shall raise the shelves upward, then you can be able to take it out.
• Adjust or clean the shelves according to your requirements.

Cleaning the vegetable drawer

1. Remove the contents of the drawer. Hold the handle of the vegetable drawer and pull it out completely until it stops.
2. Lift the vegetable drawer up and remove it by pulling it out.

ATTENTION
Soft towels or sponges dipped in water and non-corrosive neutral detergents are suggested for cleaning. The freezer shall be finally cleaned with clean water and a dry cloth. Open the door for natural drying before the power is turned on. Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpaste, organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid, or alkaline items clean refrigerator considering that this may damage the fridge surface and interior.

TROUBLESHOOTING

The following simple issues can be handled by the user. Please call the after- sale service department if the issues are not solved.

Problem

|

Possible reason

---|---

Failed operation

| • Check whether the appliance is connected to power or whether the plug is in good contact
• Check whether the voltage is too low
• Check whether there is a power failure or partial circuits have tripped

Odor

| • Odorous foods shall be tightly wrapped
• Check whether there is any rotten food
• Clean the inside of the refrigerator

Long-time operation of the compressor

| • Long operation of the refrigerator is normal in summer
• when the ambient temperature is high It is not suggestible having too much food in the appliance at the same time
• Food shall get cool before being put into the appliance
• The doors are opened too frequently

Light fails to get lit

| • Check whether the refrigerator is connected to the power supply and whether the illuminating light is damaged
• Have the light replaced by a specialist

The door can not be properly closed

| • The door is stuck by food packages too much food is placed
• The refrigerator is tilted.

Loud noises

| • Check whether the floor is level and whether the refrigerator is placed stably
• Check whether accessories are placed at proper locations
Door seal fails to be tight| • Remove foreign matters on the door seal
---|---
• Heat the door seal and then cool it for restoration (or blow it with an electrical drier or use a hot towel for heating)
Water pan overflows| • There is too much food in the chamber or food stored contains too much water, resulting in heavy defrosting
• The doors are not closed properly, resulting in frosting due to the entry of air and increased water due to defrosting
Hot housing| • Heat dissipation of the built-in condenser via the housing, which is normal when housing becomes hot due to high ambient temperature, storage of too much food, or shutdown of the compressor is shut down, provide sound ventilation to facilitate heat dissipation
Surface condensation| • Condensation on the exterior surface and door seals of the refrigerator is normal when the ambient humidity is too high. Just wipe the condensate with a clean towel.

Midea hereby declares that the appliance with SmartHome functionality meets the essential requirements and other relevant provisions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at www.midea. com among the additional documents on the product page for your appliance.

• 2.4 GHz band: 100mW max.
• 5 GHz band: 100mW max.

APPENDIX

Special for new European standard
The ordered parts in the following table can be acquired from the Service provider channel

last model is launched on the market
Temperature sensors| Professional maintenance personnel| At least 7 years after the last model is launched on the market
Printed circuit boards| Professional maintenance personnel| At least 7 years after the last model is launched on the market
Light sources| Professional maintenance personnel| At least 7 years after the last model is launched on the market
Door handles| Professional repairers and final users| At least 7 years after the last model is launched on the market
Door hinges| Professional repairers and final users| At least 7 years after the last model is launched on the market
Trays| Professional repairers and final users| At least 7 years after the last model is launched on the market
Baskets| Professional repairers and final users| At least 7 years after the last model is launched on the market
Door gaskets| Professional repairers and final users| At least 10 years after the last model is launched on the market

Dear customer

1. If you want to return or replace the product, please contact the store where you buy. (Remember to bring the purchase invoice)
2. If your product breaks down and needs to be repaired, please contact the after-sales service provider.

ATTENTION

• The model information in the product database, as well as the model identifier, can be obtained through a weblink scanned by a QR code, if any, on the energy efficiency label of the product.
• For more information about the energy efficiency of the appliance, visit https://ec.europa.eu and search using the model name.
• The model name can be found on the rating label of the appliance.

DOC AND CERTIFICATIONS

Declaration of Conformity
The ordered parts in the following table can be acquired from the Service provider channel

• Application of Council Directives LVD:2009/125/EC
• Standards, to which Conformity Is Declared EMC:2004/108/EC
• EN IEC 55014-2:2021
• EN 62552-1:2020
• EN 62552-2:2020
• EN 62552-3:2020
• EN IEC 60704-1:2021
• EN 60704-2-14:2013+A11:2015+A1:2019
• EN 60335-1:2012/A15:2021
• EN 60335-2-24:2010/A11:2020
• EN 62233:2008
• EN IEC 55014-1:2021
• EN IEC 61000-3-3
• EN IEC 55014-2
• EN IEC 61000-3-2:2019/A1:2021
• EN 61000-3-3:2013/A1:2019/A2:2021
• EN IEC 55014-2:2021
• Manufacturer’s Name: Hefei Hualing Co., Ltd.
• Place of issue: No.176 JinXiu Road, Hefei Economy & Technology Development Area, 230601, Hefei, Anhui, P.R. China.

We, Hefei Hualing Co., Ltd.
hereby declare that the above-mentioned products comply with the above- mentioned currently valid regulations and standards.

SIGNATURE:

Date: 2023-10-12

www.midea.com

© Midea 2022 all rights reserved.

References

• Midea - Make yourself at Home - World's Number 1 Appliance Producer
• Midea - Make yourself at Home - World's Number 1 Appliance Producer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>