Midea MDRS791MIE Series Side Refrigerator User Manual

Midea MDRS791MIE Series Side Refrigerator

Specifications

• Product Model : MDRS791MIE / MDRS791MIC
• Rated Voltage/Frequency: 220-240V~/50Hz
• Rated Current : 1.9A
• Total Volume : 592L
• Fresh Food Storage Compartment Volume : 379L
• Frozen Food Storage Volume : 213L
• Temperature Rise Time : MDRS791MIE – 7h, MDRS791MIC – 9h
• Freezing Capacity : 12kg/24h
• Overall Dimension (W x D x H): 910x698x1775mm

Product Usage Instructions

Leveling the Unit
To avoid vibration, level the unit by adjusting the leveling screws. Front should be slightly higher than the rear for proper door closing.

Leveling Feet

• – Turn leveling screws counterclockwise to raise the unit.
• – Turn leveling screws clockwise to lower the unit.

Leveling Doors
If doors are not at the same height:

• – To raise the door, turn the nut (1) anticlockwise.
• – To lower the door, turn the nut (1) clockwise.
• – When aligned correctly, fix it with nut (2).

Moving the Appliance:

1. Remove all food from inside.
2. Pull out the power plug and fix it into the plug hook at the rear or top of the appliance.
3. Tape shelves and door handle to prevent falling off during movement.

FAQ

• Q: How do I download the MSmartHome app and activate the product?
  

  • A: To download the app and activate the product, please follow the instructions provided in the user manual or visit the manufacturer’s website for detailed steps.

• Q: How do I adjust the temperature settings on the refrigerator?
  

  • A: The temperature settings can be adjusted using the control panel inside the refrigerator. Refer to the user manual for specific instructions on temperature adjustment.

Refrigerator

SIDE BY SIDE SERIES

USER MANUAL

MDRS791MIE
MDRS791MIC

Download the app & activate product

Warning notices: Before using this product, please read this manual carefully and keep it for future reference. The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.

THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.

SPECIFICATIONS

MSmartHome

10%~85%
**** Power Input| DC5V/500mA Maximum Transmission power: <20dBm

PRODUCT OVERVIEW

Names of components

1. Door tray
2. Glass Shelf
3. Freeze box
4. LED Lighting
5. Door Tray
6. Glass Shelf
7. Wet control shelf
8. Fresh box

ATTENTION
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.

PRODUCT INSTALLATION

Install Instruction

For refrigerating appliances with climate class

• Depending on the climate class, This refrigerating appliance is intended to be used at ambient temperatures range as specified following table.
• The climate class can be found on the rating plate. The product may not operate properly at temperatures outside of the specific range.
• You can find the climate class on the product label.

Effective temperature range
The product is designed to operate normally in the temperature range specified by its class rating.

Dimensions and Clearances
Too small of a distance from adjacent items may result in the degradation of freezing capability and increased electricity costs. Allow over 100 mm of clearance from each adjacent wall when installing the appliance.

ATTENTION
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.

Space requirement diagram (when the door is open and when the door is closed)

Width| Overall Height| Depth| Without door| Depth doors open 125°| Width doors open 125°
---|---|---|---|---|---
A| B| C| C1| D| E
910| 1775| 698| 610| 1010| 1470

Notice: All dimensions in mm

Leveling feet
To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to compensate for the uneven floor. The front should be slightly higher than the rear to aid in door closing. Leveling screws can be turned easily by tipping the cabinet slightly.
Turn the leveling screws counterclockwise to raise the unit, clockwise to lower it.

Leveling doors
If the doors are not at the same height, the door can be adjusted with a spanner.

• A- To raise the door, turn the nut (1) anticlockwise.
• B- To lower the door, turn the nut (1) clockwise.
• C- When the door is correctly aligned, fix it with the nut (2).

Moving the appliance

1. Remove all food from inside the appliance.
2. Pull the power plug out, insert and fix it into the power plug hook at the rear or on top of the appliance.
3. Tape parts such as shelves and the door handle to prevent from falling off while moving the appliance.
4. Move the appliance with more than two people carefully. When transporting the appliance over a long distance, keep the appliance upright.
5. After installing the appliance, connect the power plug into a socket out to switch on the appliance.

ATTENTION
Precautions before operation:
Before making changes the refrigerator must be disconnected from power. precautions should be taken to prevent any personal injury.

Changing the light
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service agent or similar qualified person.

ATTENTION
This product contains two light sources of energy efficiency class (G).

Connecting the appliance
After installing the appliance, connect the power plug into a socket outlet.

ATTENTION
After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you put food into the appliance. If you add food before the appliance has cooled completely, your food may spoil.

Tips for energy saving

• Do not place the appliance near cookers, radiators or other heat sources. If the ambient temperature is high, the compressor will run more frequently and for longer, resulting in increased energy consumption.
• Ensure that there is sufficient ventilation at the base of the appliance, on the sides of the appliance and at the back of the appliance. Never cover ventilation openings.
• Please also observe the spacing dimensions in the chapter “Installation”.
• The arrangement of drawers, shelves and racks as shown in the illustration offers the most efficient use of energy and should therefore be retained as far as possible. All drawers and shelves should remain in the appliance to keep the temperature stable and save energy.
• To obtain a larger storage space (e.g. for large refrigerated/frozen goods), the middle drawers can be removed. The top and bottom drawers and shelves should be removed last if necessary.
• An evenly filled refrigerator/freezer compartment contributes to optimal energy use. Therefore, avoid empty or half-empty compartments.
• Allow warm food to cool before placing it in the refrigerator/freezer. Food that has already cooled down increases energy efficiency.
• Allow frozen food to defrost in the refrigerator. The coldness of the frozen food reduces the energy consumption in the refrigerator compartment and thus increases the energy efficiency.
• Open the door only as briefly as necessary to minimise cold loss. Opening the door briefly and closing it properly reduces energy consumption.
• Setting the temperature no colder than necessary contributes to optimal energy use. The optimum temperature in the refrigerator is +7°C. It should be measured as far forward as possible in the top compartment of refrigerators.
• The door seals of your appliance must be perfectly intact so that the doors close properly and energy consumption is not increased unnecessarily.

OPERATION INSTRUCTIONS

Control panel

| Display| | Button
---|---|---|---
1| Super Cooling icon| A| Temperature down button
2| Super Freezing icon| B| Temperature zone selection button
3| Vacation icon| C| Temperature up button
4| Refrigerating compartment temperature| D| **** button
5| Freezer compartment temperature| E| Lock/Unlock button
6| Wireless Network icon| |
7| Temperature display icon| |
8| Lock icon| |

ATTENTION
The actual control panel may differ from model to model.
The control panel will turn off automatically for energy saving.
If there is any finger or skin contacts to the control panel while cleaning it, the button function may operate.

Lock / unlock
In the unlocked state, long press the button for 3 seconds, enter the lock state; In the locked state, long press the button for 3 seconds, the lock icon disappears and enters the unlock state. All the following functions must be operated in the unlocking status.

Vacation mode

• Click the button to enter the vacation mode. Icon   lights up, the vacation mode will start after locking the control panel.
• Under vacation mode, the refrigerating compartment is turned off and temperature area display -the freezer compartment temperature is set at -18 ℃.

Super Cooling mode
Click the button to enter the quick cooling mode. Icon ****lights up, the quick refrigerating mode will start after locking the control panel. Quick cool exits for 6h.

Super Freezing mode
Click the button to enter the quick freezing mode. Icon ****lights up, the quick freezing mode will start after locking the control panel. Quick freeze exits for 24h.

Temperature setting of refrigerating compartment
Click temperature zone selection button , refrigerating compartment temperature will blink. Then click the button again to set the temperature, and will hear one beep. Setting scope is between 2°C and 8°C. Every time you click the button, the temperature will be changed 1°C. After adjusting, the digital tube will keep blinking for 5 seconds. New temperature setting will take effect after locking the control panel.

Temperature setting of freezer compartment
Click temperature zone selection button , freezer compartment temperature will blink .Then click the button again to set the temperature, and you will hear one beep. Setting scope is between -16°C and -24°C. Every time you click the button, the temperature will be changed 1°C. After adjusting, the digital tube will keep blinking for 5 seconds. New temperature setting will take effect after locking the control panel.

ATTENTION
Recommended setting: Refrigerated chamber 5°C, freezing chamber – 18°C.

The quick-freezing function is designed to maintain the nutritional value of the food in the freezer. It can freeze the food in the shortest time. If a large amount of food is frozen at one time, it is recommended that the user turn on the quick-freezing function and put the food in. At this time, the freezing speed of the freezer compartment is increased, which can quickly freeze the food, effectively lock the nutrition of the food, and facilitate storage.

Wireless network setting-AP configuration
Please start AP mode before connecting to the mobile app. Whether in the locked or unlocked state, press and hold the mode button for 3s to force the refrigerator wireless module to set to AP mode, and then the temperature display area will display AP; After the module is successfully configured to enter the AP mode, it will automatically exit the AP mode, and the temperature display area will return to normal temperature display; After setting the AP mode, if the module is not configured successfully for 10s, it will forcibly exit the AP mode and restore the normal temperature display.

Storage upon power failure
In case of power failure, the instant working state will be locked and maintained till re-electrification.

Opening warning and alarm control
when open the refrigerator doors, the opening music will play. If the door is not closed in two minutes, the buzzer will sound once every minute until the door is closed. Press anyone button to stop the buzzer alarm.

ATTENTION

Disable the door opening tone: Press and hold the combination key for 3 seconds to disable or enable the door opening tone (the tone is enabled by default). Disable the door opening alarm sound: Not possible

Error code
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though the refrigerator may still have cold storage function with the following faults, the user shall contact a maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.

Tips on storing food

Freezer compartment

• The freezer is designated for the storage of food frozen at very low temperature, long-term storage of frozen food, and for the production of ice.
• Only use the shelves in the door of the freezer to store frozen food, not for storing hot food designated for freezing.
• Do not put fresh and frozen food next to each other. The frozen food may thaw.
• When freezing fresh food (such as meat, fish or chopped meat), cut them into parts that can be used at the same time.
• Storing frozen food: instructions are usually stated on the packages, which must be followed. If there is no information on the packaging, food should not be stored for longer than three months from the date of purchase.
• When purchasing frozen food, make sure that it was frozen at a suitable temperature and that the packaging is not damaged.
• Frozen food should be kept in suitable packages to retain the quality and should be returned to the freezer compartment as soon as possible.
• If a package of frozen food shows moisture or abnormal bulging, it is probable that it was stored at the wrong temperature and the content is spoiled.
• The storage period for frozen food depends on the room temperature, the thermostat setting, the frequency of opening the door of the freezer, the type of food and the time of transporting the product from the shop to the household. Always follow the instructions printed on the packaging and never exceed the maximum storage time stated on the package.

Refrigerating compartment

• To reduce moisture and subsequent ice build-up, never put liquid into the refrigerator in unsealed containers. Frost tends to concentrate in the coolest parts of the evaporator. Storing uncovered liquids results in a more frequent need for defrosting.
• Never put warm foods in the refrigerator. These should first cool down at room temperature and then be placed so as to ensure adequate air circulation in the refrigerator.
• Foods or food containers should not touch the back wall of the refrigerator because they could freeze to the wall. Do not keep regularly opening the door of the refrigerator.
• Meat and clean fish (packed in a package or plastic foil) can be placed in the refrigerator. which can be used in 1-2 davs.
• Fruit and vegetables without packaging can be placed in the part designated for fresh fruit and vegetables.

time, the worse the taste and nutrition),
| | | suitable for frozen fresh food.
| | |
| | | aquatic products and meat products
3| -Freezer| £-18| (recommended for 3 months, the longer the storage time, the worse the taste and nutrition),
| | | suitable for frozen fresh food.
| | |
| | | aquatic products and meat products
4| -Freezer| £-12| (recommended for 3 months, the longer the storage time, the worse the taste and nutrition),
| | | suitable for frozen fresh food.
| | |
| | | aquatic products and meat products
5| -Freezer| £-6| (recommended for 3 months, the longer the storage time, the worse the taste and nutrition),
| | | suitable for frozen fresh food.
| | |
| | | processed foods, etc. (Recommended to eat
6| 0-star| -6 ~ 0| within the same day, preferably no more than 3 days).
| | | Partially encapsulated processed foods (non-
| | | freezable foods).
| | | Fresh/ frozen pork, beef, chicken, freshwater
| | | aquatic products, etc. (7 days below 0°C and
7| Chill| -2 ~ +3| above 0°C is recommended for consumption within that day, preferably no more than 2
| | | days).Seafood (less than 0 for 15 days, it is not
| | | recommended to store above 0°C.
| | |
8| Fresh food| 0 ~ +4| etc.(Recommended to eat within the same day,
| | | preferably no more than 3 days)
9| Wine| +5 ~+20| Red wine, white wine, sparkling wine, etc.

ATTENTION
please store different foods according to the compartments or target storage temperature of your purchased.

APP SETUP AND OPERATION

Download the MSmarthome App
On an app market (Google Play Store, Apple App Store), search for “MSmartHome” and fi nd the MSmartHome app. Download and install it on your phone. You can also download the app by scanning the QR code below.

Register and log in
Open the MSmartHome app, and create a new account to start (you can also register through a third-party account). If you already have an existing account, use the account to log in.

Connect your devices to MSmarthome

1. Please make sure your mobile phone is connected to a wireless network. If it is not, go to Settings and enable wireless networks and Bluetooth.
2. Please power on your devices.
3. Open MSmarthome App on your phone.
4. If a message of “Smart devices discovered nearby” appears, click to add.
5. If no message appears, select “+” on the page and select your device in the list of nearby devices available. If your device is not listed, please add your device manually by the device category and device model.
6. Connect your device to the wireless network according to instructions on app. If the connection fails, please follow the instructions provided by the app to continue with the operation.

NOTE

1. Make sure your devices are powered on.
2. Keep your mobile phone close enough to your device when you are connecting your device to the network.
3. Connect your mobile phone to the wireless network at home, and make sure you know the password of the wireless network.
4. Check if your wireless router supports 2.4 GHz band and turn it on. If you are not sure whether the router supports 2.4 GHz band, please contact the router manufacturer.
5. The device cannot connect to the wireless network that requires authentication, and it usually appears in public areas such as hotels, restaurants, etc. Please connect to a wireless network that does not require authentication.
6. Turn off the WLAN+ (Android) or WLAN Assistant (iOS) function of your mobile phone when connecting your device to the network.
7. In the case that your device connected to a wireless network before but it needs to reconnect, please click “+” on the app Home page, and add your device again by the device category and model according to the instructions on app.

CLEANING AND MAINTENANCE

Defrosting
The refrigerator is made based on the air-cooling principle and thus has automatic defrosting function. Frost formed due to change of season or temperature may also be manually removed by disconnection of the appliance from power supply or by wiping with a dry towel.

Cleaning of door tray

• According to the direction arrow in the figure below, use both hands to squeeze the tray, and push it upward, then you can take it out.
• After washing the tray having been taken out, you can adjust its installing height in accordance with your requirement.

Cleaning of glass shelf

• As the innermost part of the refrigerator liner where contacting the shelves has a backstop, you shall raise the shelves upward, then you can be able to take it out.
• Adjust or clean the shelves according to your requirement.

Cleaning the vegetable drawer

1. Remove the contents of the drawer. Hold the handle of the vegetable drawer and pull it out completely until it stops.
2. Lift the vegetable drawer up and remove it by pulling it out.

ATTENTION
Soft towels or sponge dipped in water and non-corrosive neutral detergents are suggested for cleaning. The freezer of shall be finally cleaned with clean water and dry cloth. Open the door for natural drying before the power is turned on. Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpastes, organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items clean refrigerator considering that this may damage the fridge surface and interior.

TROUBLESHOOTING

The following simple issues can be handled by the user. Please call the after- sale service department if the issues are not solved.

Check whether the voltage is too low
Check whether there is a power failure or partial circuits have tripped
Odor| Odorous foods shall be tightly wrapped
Check whether there is any rotten food
Clean the inside of the refrigerator
Long-time operation of the compressor| Long operation of the refrigerator is normal in summer
when the ambient temperature is high It is not suggestible having too much food in the appliance at the same time
Food shall get cool before being put into the appliance
The doors are opened too frequently
Light fails to get lit| Check whether the refrigerator is connected to power supply and whether the illuminating light is damaged
Have the light replaced by a specialist
Door can not be properly closed| The door is stuck by food packages Too much food is placed
The refrigerator is tiltedr.
Loud noises| Check whether the floor is level and whether the refrigerator is placed stably
Check whether accessories are placed at proper locations
Problem| Possible reason
---|---
Door seal fails to be tight| Remove foreign matters on the door seal
Heat the door seal and then cool it for restoration (or blow it with an electrical drier or use a hot towel for heating)
Water pan overflows| There is too much food in the chamber or food stored contains too much water ,resulting in heavy defrosting
The doors are not closed properly, resulting in frosting due to entry of air and increased water due to defrosting
Hot housing| Heat dissipation of the built-in condenser via the housing, which is normal When housing becomes hot due to high ambient temperature, storage of too much food or shutdown of the compressor is shut down, provide sound ventilation to facilitate heat dissipation
Surface condensation| • Condensation on the exterior surface and door seals of the refrigerator is normal when the ambient humidity is too high. Just wipe the condensate with a clean towel.

DOC AND CERTIFICATIONS

Declaration of Conformity
We hereby confirm that the following customer model names and Midea model names match each other respectively.

LVD : 2009/125/EC
EMC : 2004/108/EC

Application of Council Directives
Standards, to which Conformity Is Declared

• EN IEC 61000-3-2:2019+A1
• EN 61000-3-3:2013+A1+A2
• EN 60335-1:2012+A11+A13+A1+A14+A2+A15 EN IEC 60335-2-24:2022+A11
• EN 62233:2008
• EN IEC 62311:2020
• EN 50665:2017
• EN 62479:2010
• EN 50663:2017

Manufacturer’s Name: Hubei Midea Refrigerator Co., Ltd.
Manufacturer’s Address : No.38 Oriental Road, 434000, Jingzhou, Hubei, P.R. China

We, Hubei Midea Refrigerator Co., Ltd.
hereby declare that the above-mentioned products comply with the above- mentioned currently valid regulations and standards.

SIGNATURE

Date: 2023-03-27

CE
Midea hereby declares that the appliance with MSmartHome functionality meets the essential requirements and other relevant provisions of the Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at www.midea.com among the additional documents on the product page for your appliance.

APPENDIX

Special for new European standard
The ordered parts in the following table can be acquired from Service provider channel

last model is launched on the market
Temperature sensors| Professional maintenance personnel| At least 7 years after the last model is launched on the market
Printed circuit boards| Professional maintenance personnel| At least 7 years after the last model is launched on the market
Light sources| Professional maintenance personnel| At least 7 years after the last model is launched on the market
Door handles| Professional repairers and| At least 7 years after the last model is launched on the market
Door hinges| Professional repairers and| At least 7 years after the last model is launched on the market
Trays| Professional repairers and| At least 7 years after the last model is launched on the market
Baskets| Professional repairers and| At least 7 years after the last model is launched on the market
Door gaskets| Professional repairers and| At least 10 years after the last model is launched on the market

Dear customer

1. If you want to return or replace the product, please contact the store where you buy. (Remember to bring the purchase invoice)
2. If your product breaks down which needs to repair, please contact after-sales service provider.

ATTENTION
The model information inthe product database, as well as the model identifier, can be obtained through a weblink scanned by a QR code, if any, on the energy efficiency label of the product.
For more information about the energy efficiency of the appliance, visit https://ec.europa.eu and search using the model name. The model name can be found on the rating label of the appliance.

Coldest zone in the refrigerator

OPTIONAL : OK-temperature indicator

• The OK-temperature indicator can be used to determine temperatures below + 4°C. Gradually reduce the temperature if the sign does not indicate “OK”.
• To ensure the temperature in this area, do not change the positioning of the shelf. Enforced air refrigerators (equipped with a fan or No Frost models),the symbol of the coldest zone is not represented because the temperature inside is homogeneous.

Temperature indicator setting

• To help you set your refrigerator well, it is equipped with a temperature indicator that will monitor the average temperature in the coldest zone.
• WARNING: This indicator is intended to work only with your refrigerator, do not use it in another refrigerator (in fact, the coldest zone is not the same), or for any other use.

Checking the temperature in the coldest zone

• With the temperature indicator, you can check regularly that the temperature of the coldest zone is correct. Indeed, the internal temperature of the refrigerator depends on several factors such as the ambient temperature of the room, the amount of food stored and the frequency of door opening. Take these factors into consideration when setting the device.
• When the indicator shows « OK », this means that your thermostat is well adjusted and the internal temperature correct.
• If the indicator of temperature turns WHITE, this means that the temperature is too high; in this case, increase the refrigerator temperature control setting and wait for 12 hours before performing a new visual inspection of the indicator. When fresh food has been introduced or the door has been left open, it is possible for the indicator of temperature to turn WHITE after a while.

www.midea.com
© Midea 2022 all rights reserved

References

• Midea - Make yourself at Home - World's Number 1 Appliance Producer
• Midea - Make yourself at Home - World's Number 1 Appliance Producer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>