StreamBuds HTG01 Hybrid True Wireless Earbuds User Guide

StreamBuds HTG01 Hybrid True Wireless Earbuds

LET’S STAY CHARGED

Note: If your earbuds and charge case do not have any power when you first unpack them, place the earbuds into the charge case and plug the charge case into a USB port using the USB C cable [9] provided.

The Earbuds

A voice prompt ‘Battery low’ allows for 2 minutes play time before the earbud powers down stating ‘Battery low, power off’.

The Earbuds LED Light [ 3 ] will flash RED for 1 second an will then switch off.

Each LEFT and RIGHT earbud has 4-line LED Charge Indicators [ L ] and [ R ] on the case.

Place the earbuds in the case and close the lid to charge.

The 4 LED indicators [ L ] and [ R ] will flash to show that the earbuds are charging for 15 seconds and then will turn off.

TIP: 15 MINUTE QUICK CHARGE

If you’re running low on power, charge your earbuds for 15 minutes and get 2 hours extra play time while on the go.

The Portable Charging Case

To check the battery status of the case, open the lid of the Portable Charging Case [ 5 ] . The LED Digital Display [ 7 ] will show the percentage of the battery remaining [ B ] for 30 seconds.

You can charge the case in two ways:

1. With a Type C charging cable
   Always connect the case to a suitable USB wall charger, computer USB port or a power bank using the USB Type C charging cable [ 9 ] supplied. Plug the supplied cable into the USB C port [ 6 ] on the charge case.
   When the LED Digital Display number [ B ] reaches 100 (i.e., 100%) the case is fully charged, and the display will switch off.

2. Qi wireless charging
   At the base of the case is a Qi wireless charge surface [ 8 ] . Place the case flat on a Qi Wireless Charger (sold separately).
   When the LED Digital Display number reaches 100 (i.e., 100%) the case is fully charged, and the display will switch off.
   Charging the case may take up to 2 hours.

LET’S CONNECT

First time pairing

When you open the Portable Charging Case [ 5 ] both earbuds will turn on and connect together. A voice prompt will confirm with ‘Power on, pairing’. One Earbud LED Light [ 3 ] will flash RED and BLUE to indicate pairing mode.

Go to the Bluetooth settings on your audio device to select ‘MIXX Stream Buds Sports Charge 2’ from the list. Once paired successfully you will hear ‘Connected’ and the Earbud LED Lights [ 3 ] will turn off.

Placing both earbuds back in the Portable Charging Case ( 5 ) and closing the lid will power them off. (note – if the earbuds do not turn off, the battery in your charging case needs to be recharged – see ‘Let’s Stay Charged’.)

You can now enjoy your music, watch a video or take a call hands free.
The earbuds will automatically reconnect to the last device they were paired with, confirming ‘Connected’.

LET’S PLAY

TOP TIP : For better noise isolation, comfort and sound quality ensure the correct sized (S, M or L) ear cushions [ 10 ] (supplied) are fitted on the earbuds.

Play / Pause
Long press for 1 second either Touch Sensor [ 1 ] or [ 2 ].

Decrease Volume
Single tap LEFT Touch Sensor [ 1 ].

Increase Volume
Single tap RIGHT Touch Sensor [ 2 ].

Answer / End call

Long press for 1 second either Touch Sensor [ 1 ] or [ 2 ].
(Audio is picked up via the microphones [ 4 ] .)

Decline an incoming call
Double tap either Touch Sensor [ 1 ] or [ 2 ].

Change the Preset Equalization (EQ) Settings Choose from 3 Equalization (EQ) modes to suit your personal preference. There is no App required.

• Bass boost mode increases the bass sound.
• Voice mode decreases the bass, the high-frequency tones and increases the speech frequencies.
• Music mode returns you to the optimal EQ for music listening.

Triple tap LEFT Touch Sensor [ 1 ] to cycle through the Music, Bass Boost and Voice modes to find your preferred sound.

Power On

Remove both earbuds from the case. They will automatically turn on and dual pair together. A voice prompt will state “Connected” as confirmation. To manually turn on, long press each Touch Sensor [ 1 ] and [ 3 ] for 3 seconds.

Power Off

Place both earbuds in the case and close the lid. This will automatically turn off the earbuds and the Bluetooth.

LET’S ASK GOOGLE ASSISTANT / SIRI

Pair your Bluetooth device with your earbuds.
Triple tap RIGHT Touch Sensor [ 2 ] to activate Siri or Google Assistant.

Your Voice Assist familiar ‘Beep’ will sound to confirm connection. You can now ask Siri or Google Assistant a question or state a command.

LET’S RECYCLE

This product can be recycled.
Products bearing this symbol must NOT be thrown away with normal household waste.

Take the product to a collection point designated for recycling of electronic devices.

Find out more about return and collection points through your local authority

LET’S BE SAFE

IT IS IMPORTANT THAT YOU PLEASE READ THIS SECTION COMPLETELY.

Check with your doctor before use if you are fitted with a medical device such as a pacemaker or a programmable shunt.

Ensure the product is correctly connected using the manufacturer’s original accessories included with the product.

Do NOT make unauthorized alterations to this product.

Product may contain small parts which can be a choking hazard.

Please keep the product out of reach from children under 6 and animals.

Whilst this product has been made using hypo-allergenic materials, you may suffer some skin irritation after prolonged use.

LISTEN RESPONSIBLY!

Do NOT listen to loud music for a long duration of time. We recommend turning the volume down before placing the device in your ears to avoid hearing damage.
After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level. Noise levels are measured in decibels (dB), exposure to any noise at or above 85 dB can cause gradual hearing loss. Monitor your use; hearing loss is a function of loudness versus time. The louder it is, the less time you can be exposed to it. The softer it is, the more time you can listen to it.

Do NOT use the product while operating machinery, including cars, trucks or other vehicles.

Do NOT use noise cancelling mode or use your device in areas where the use of hearing is required for safety. e.g., while riding a bicycle, at a construction site or railroad etc.

Clean only with a dry cloth – Wipe off sweat from the earbuds and the charging case before charging.

IMPORTANT!

Do NOT use a non-certified PD or QC3 wall charger as this may damage the product. Only use the cable supplied to charge your device.

If your product has become damaged in any way, does not operate normally or has been dropped, please refer to a qualified person to have the product checked before continuing to use it.

WARNING!

This product contains a Lithium battery. Incorrect disposal of this battery may result in an explosion.

The operating temperature range for this product is 5º – 40º celsius.

Please avoid exposing the product, charging case and cable connectors to prolonged rain, moisture, or liquid spills/splashing.

Please remove your device from your ears immediately if they emit any loud unusual noise or you experience a warming sensation

If you experience any of the issues listed above, please turn off your device and contact MIXX Ltd on

support@mixx-io.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>