Nismile JDQJS0001AVC-WTUS Electric Spin Scrubber User Manual

Nismile JDQJS0001AVC-WTUS Electric Spin Scrubber

Before using, please carefully read this user manual.
Please store it properly after reading for future reference.

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS-FOR HOUSEHOLD USE ONLY READ CAREFULLY BEFORE USE-SAVE THESE INSTRUCTIONS

WARNING
To reduce the risk of injury, fire, electric shock, and property damage resulting from improper use of the appliance, carefully observe the following instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.

1. DO NOT use if the fuselage is damaged.
2. As an electric cleaning product, it can not be used as a toy.
3. DO NOT insert any accessories while the machine is in operation.
4. The product cannot be used soaked in water.
5. If product is damaged, discontinue use.
6. Keep product away from heated surfaces.
7. Always turn off the scrubber before connecting to charging.
8. DO NOT plug or unplug the charger with wet hands.
9. DO NOT leave it unattended while the brush is running.
10. DO NOT use bleach or abrasive detergents.
11. DO NOT pour boiling water on the brush or sponge. Important Safety Instructions for Battery and Charging
12. DO NOT incinerate appliance, even if it is severely damaged, as the lithium-ion battery may explode in a fire.
13. DO NOT try to remove the battery under any circumstances.
14. Keep away from heat, oil, or flammable and explosive materials when charging.
15. DO NOT immerse the rechargeable battery in water or splash water on the battery.
16. DO NOT disassemble or modify the rechargeable battery.
17. DO NOT connect the rechargeable battery to equipment other than this product.
18. DO NOT put the rechargeable battery into fire or heat it.
19. DO NOT touch liquid leaking from the rechargeable battery.
20. DO NOT allow metal or other objects to come into contact with the terminals of the rechargeable battery.

PREPARATION AND STATUS BEFORE USE

• This product has IPX7 rated, but it is not totally waterproof.
  Drain any remaining water in the cleaning area, such as residual bath water, before using it. Before using, drain the water. Immersion in water or rotation of the product underwater may cause it to malfunction.
  What is IPX7
  A structure that stops internal submersion even if the product is immersed in 6 to 40 inches of fresh water for around 30 minutes when it is stationary.

• Do not use on surfaces with softer bristles than those of this product. * Areas with paint or coatings, such as car bodies.

  • Glossy surfaces or floors and wood.
  • Anti-fog glass surfaces.
    Use caution when using the product on such surfaces as the brush may damage the surface.

The warranty does not cover cases where the brush leaves scratches on household goods or automobiles.

• Store in a dry room after use, away from low temperatures.

  • In the bathroom.
  • Outside or near window glass.
    Please note that storing the product in such a location may allow moisture to enter the interior of the unit and cause the product to malfunction.

• Use a neutral detergent diluted with water when cleaning
  Do not use bleach or abrasive detergents, which may cause the equipment to deteriorate or malfunction.

Do not try to take apart the device. The rechargeable battery of this product cannot be replaced.
Before storing, keep the battery completely charged. This will stop the rechargeable battery from aging. Even when not in use, charge the battery around once each month.

WHAT’S INSIDE

• Large Brush

• Large Sponge

• Machine Tail
  

• Small Brush

• Small Sponge
  

• Charger
  

• Pointed Brush

• Sponge Brush Base

HOW TO INSTALL THE BRUSH

• Large Brush and Small Brush
  Check the direction of the claws on the bottom and the cutouts around the rotation axis of the machine head carefully, and insert the machine head until it clicks into place.
  

  • Forcibly inserting it in the wrong direction will damage it.

• Pointed Brush and Sponge
  The pointed brush just has to be inserted deeply into the revolving shaft of the head until it snaps into place, it does not need to be aligned with the claw.
  The sponge does not need to be aligned with the claw. First insert the base into the inside of the head swivel until it snaps into place. Once the base is installed, press the back of the sponge {black part) onto the top glue on the base and glue it in place.
  

  • When removing any brushes, pull them straight out.

Caution Always replace brushes with the motor stopped. Failure to do so may cause harm.

HOW TO USE EXTENSION TUBES

Depending on the area to be cleaned, this product’s three various lengths may be adjusted.
Press the lock button on the back end of the machine body to remove the machine tail before using the extension tube. Next, while pushing the lock button, put the extension tube into the machine body’s back end.
After inserting the extension tube, reattach the removed tail to the extension tube’s back end.

The pipe may be expanded further from its extended state. Holding the main unit firmly in place, move the handle to the right to loosen the pipe, then turn left after the handle drawing it to the proper position to fix it in place.

After adjustment, make sure the extension tube is not loose before use. Do not turn the handle too far to the left or it will break.

CHARGING METHOD

The charging indicator will turn red while charging and turn off when done.
After charging is finished, make sure the charging cap is firmly closed.

DUAL ROTATING BRUSHES

The large/small brush features a unique design that enables it to rotate in both directions, both in the center and on the edge.
The dual-rotating brush is distinguished by its simplicity in scraping dirt out of grooves and by its steady operation when used on the cleaning surface .

Caution Avoid turning the brushes manually!
This might cause damage!

HOW TO USE

Press the switch button and the brush starts to rotate

It should be noted that water will splash around the brush if it is turned while having water on it due to centrifugal force.
When cleaning, use a neutral detergent diluted with water. The device might become damaged or stop working if bleach or an abrasive detergent are used.

There is an overcurrent safety feature built into this device. The rotating brushes will immediately cease spinning if a specific amount of force is applied to them.
To restart the system in this situation, hit the start button once and then again.
If it still doesn’t work, try connecting the charger for a while, taking it off, and then pressing the start button again.

CARE AND MAINTENANCE

• Machine Body
  Clean up with a gentle, dry cloth. If the dirt is heavy, remove it with a soft cloth that has been soaked with water and wrung out firmly.
  Caution Do not use thinner, benzene, bleach, etc.
  It may cause deterioration or deformation of the main unit.

• Brushes and Sponges
  Take out the dust and trash. If it is very dirty, hand wash in warm water with a light detergent.

  • Use clothes detergent.
  • Do not use bleach.

STORAGE METHOD

Use the hanging strap attached to the machine tail
Store on hangers or hooks with a load capacity of 1 kg (2.2 lbs.) or more.

TROUBLESHOOTING

• Cannot be Charged

• Is the charger connected to the product?
  → Connect the charger to the product.

• Are you using the wrong charger?
  → Be sure to use the charger included with the product.

• Are you using an extension cord?
  → Remove the extension cord and plug the charger directly into the outlet.

• Pressing the Button Does not Work

• Is the product charged?
  → Charge the product.

• Stopped While Cleaning

• Is the remaining charge low?
  → Charge the product.

• Is the overcurrent protection function not working?
  → Please hit the start button once and then again. If it still doesn’t work, try connecting the charger for a while, taking it off, and then pressing the start button again.

• The internal rechargeable battery may have degraded if the product isn’t functioning properly. Even when a rechargeable battery is handled appropriately, frequent charging and discharging will cause it to lose capacity. (The rechargeable battery’s lifespan varies based on usage circumstances, such as ambient temperature, time of use, etc.)

• Repeated use will shorten the operating time, but this is not a defect.

• The rechargeable battery was not fully charged when it was shipped, resulting in a decreased usage duration.

• If the battery is not fully charged (The charging indicator remains on) after 8 hours of charging, the product may be malfunctioning.

If the symptoms do not improve with the above measures, the product may be malfunctioning. Please contact the support center for repair.

PRODUCT SPECIFICATIONS

• Please note that the above specifications are subject to change without notice for improvement.
• The aforementioned operating and charging times may change based on the operational conditions. (The numbers displayed are based on the conditions in our test lab.)

CUSTOMERS SUPPORT

ELECTRIC SPIN SCRUBBER
E-mail: service@nismile.vip
MADE IN CHINA
Model: LE-CB001

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>