trianco Activair 3kW Indoor Air Source Heat Pump User Manual

trianco Activair 3kW Indoor Air Source Heat Pump

User Privacy Instructions

We take your privacy very seriously and we promise to inform you how we use the data. Users’ private data, such as mailboxes, address, before uploading to the cloud, we will get your permission, and we will work hard to protect your data security.

Description

• Receive data signal from cloud server and transmit to the main device;
• Receive data signal from main device and transmit to cloud server;
• To achieve remote upgrade the WiFi module baseplate MCU by cloud server;
• To achieve the remote upgrade of the main device by WiFi module baseplate MCU.

Technical Parameters

1. OPERATING VOLTAGE: DC8V~12V (Recommended value 12V)
2. OPERATING CURRENT: Max. recurrent peak lA, average standby current 50mA
3. TEMP. RANGE: Operating Temp.: -30°C~+70°C; Storage Temp.: -40°C~+85°C
4. LED INDICATOR LIGHT:
5. 4 lights, Network configuration indicator,router connection indicator, cloud server connection
6. indicator, 485 communication indicator;
7. DIMENSION(LXWXH): 78mmX63mmX24mm

Installation

There is a magnet on the back of the WiFi module, it can be installed indoors or outdoors, and avoid direct sunlight

Functional Description

Account Login

Use email address and password to register, login or reset the password .

1. Account Registration: To register an account, click(!) {Fig.1) to jump to the Account Registration interface, fill in the relevant information and click to receive the verification code, while completing the application information, click® to read the details of the Privacy Policy, then click ©to agree, and click@, registration is done.
   Please note, the valid time of one verification code is lSmin, please fill in the verification code within lSmin, otherwise you need to ask for a new one.

2. Log in: Follow the instructions on the page {Fig.1 ) , enter your registered email address and password, click@andjump to device list;

3. Forgot Password: While forget your password, click (J) {Fig.1 ), jump to the Forgot Password interface {Fig.3 ). Follow the instructions on the page, fill in the relevant informations, click@ to receive a verification code from your mailbox, click@ to confirm and password reset is done.

Add Device

After login, displays My Device interface {Fig. 4) , follow the instruction to add WiFi or DTU.

WiFi Configure Network

1. Follow the instructions on the page (Fig. 7) , press the button on the module and hold for ls till two lights are on,then AP connection is activated, click@to confrim, and click@to turn the page;
2. Click@ to enter the WiFi password for the current connection, click@) to confirm;
3. Jump to system settings, connect specified WiFi, click 0 to select the “Smart_AP _xxx” , click @) to popup window(Fig.10), follow the instruction and then jump to WiFi setting interface (Fig.11 );
4. Slide the page back to configure network interface, click @to turn next page {Fig. 12) , click@to join WLAN Network, click@to cancel {Fig. 13) ; click @)to bond device { Fig. 14) ;
5. Click “OK” (Fig.15) to allow the App to use the camera for scanning the Barcode on the heat pump unit {Fig.16) ;
6. Click “OK” , device bond is done {Fig.17) ;
7. After WiFi and DTU bonding is done, and jump back to the main interface of device{ Fig. 18 ).

Device Management

Device management operations are as below:

Code:20200615-0001

Documents / Resources

| trianco Activair 3kW Indoor Air Source Heat Pump [pdf] User Manual
Activair 3kW Indoor Air Source Heat Pump, Activair 3kW, Indoor Air Source Heat Pump, Air Source Heat Pump, Source Heat Pump, Heat Pump, Pump
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>