NOVILOT Sensor Soap Dispenser Instruction Manual
- June 7, 2024
- NOVILOT
Table of Contents
NOVI LOT SENSOR SOAP DISPENSER INSTRUCTION MANUAL
MODEL: MSD-PMO1
PLEASE READ THE INSTRUCTION MANUAL BEFORE USE.
Structure
A. Liquid storage bottle cap
B. Store liquid bottle
C. Foam outlet
D. USB charging mouth
E. LCD and switch
Instructions
1. Long press ‘+’ button for 3 seconds to start the machine. Press the s+ ‘
button one time is to add the liquid output of 0.1 second. The longest liquid
output time is 2 seconds. 2. Long press the ‘-‘ button for 3 seconds is to
shut down the machine In the start-up state. press the ‘-‘ button one time is
to reduce the liquid output of 0.1 second. The shortest time is 0.1 seconds;
3. When the machine is turned on. reach your hand 3-5 cm below the outlet.
the machine will produce foam automatically (alcohol spray or hand gel
sanitizer). Then you can rub it thoroughly and rinse it with clean water:
4. Long press the button to produce foam continuously but it will stop
immediately after release it. It is recommended to set the use time to 0.6 –
t5 seconds.
Introduction
This machine is an intelligent soap dispenser. which adopts international
high-end electronic control infrared ray induction technology and energy-
saving device, Automatic sensing prevents hand contact and cross infection.
1.The materials used for the product and the entire industrial manufacturing
process fully comply with the strict restrictions of international standards.
It is free from any toxic. pollution and radioactive ingredients.
2. The product is composed of several separate parts so easy to disassemble.
3. This machine v-can use ordinary emulsion hand sanitizer. But need to be
diluted with water according to proportion (13) thoroughly shake and dissolve.
When cleaning the machine. wipe the machine body with a wrung-out wet cloth.
Do not wash the machine in water.
| Name | Novi lot | Battery capacity | z000mAh |
|---|---|---|---|
| Model | MSD-PMoi | voltage | 3.7v |
| Battery | NCM18650 | Power | 3W |
| Input | 5V – 0.8A |
Precautions
- Do not use lotion or particle hand sanitizer directly.
- Please unplug the soft rubber plug before charging the machine. Please cover it with the soft rubber plug immediately to prevent water when finish charging:
- Please do not put the machine in the bathroom when there is a lot of steam,
- It is forbidden to put objects or water on the liquid crystal in the power-on state, wich will lead to foam continuously.