audison B-CON Bluetooth Hi-Res Receiver User Manual
- June 6, 2024
- audison
Table of Contents
B-CON Bluetooth Hi-Res Receiver
ACCESSORIES
USER’S MANUAL
PRODUCT FEATURES
The Audison B-CON is the only Bluetooth® 5.0 player designed for automotive
use that has obtained the “Hi-Res audio wireless” certification from JAS
(Japan Audio Society). B-CON is the ideal choice for streaming audio
from a Hi-Res player (Fioo, Sony Walkman …) and from latest generation
Android/Apple mobile devices.
B-CON is compatible with all audio formats and reaches maximum performance
with uncompressed BT streaming (max 96kHz / 24bit, only with Android LDAC
devices), both playing local files and with Apps that provide Hi-Res streaming
(Tidal, Qobuz. ..).
In keeping with Audison tradition, during the design phase particular attention was paid to volume management, a fundamental aspect for the search for the highest audio quality. The study by the Audison R&D team focused on the audiophile use of the “Absolute Volume” function. In the B-CON this manages the Master Volume of the DSP*, avoiding the loss of resolution that occurs when operating on the volume of the mobile device (mode: Absolute Volume Off), ensuring full dynamic range.
In the case of a voice call, the DSP automatically switches to the processor’s Master input * (by associating the mobile device with the B-CON and the car). At the end of the call it reverts back to playing the song previously paused, managing the car speakerphone without limitations.
Audison B-CON has a “pass-through” digital optical input (max 192kHz / 24bit)
which provides a second auxiliary input to the active DSP when there is no BT
streaming.
The digital output (max 96kHz / 24bit) and the analog output (max 2 VRMS, S/N
RATIO 100 dBA) allow the user to connect the B-CON to any audio device.
*available on the new Forza line or on the bit One HD Virtuoso by connecting the ADC port
Android
FCC:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
IC:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
RF Exposure
This device has been evaluated and shown compliant with the RF exposure
requirements listed in RSS-102 – Radio Frequency (RF) Exposure Compliance of
Radio communication Apparatus limits under fixed exposure conditions (antennas
are greater than 20cm from a person’s body) when installed in certain specific
OEM configurations.
CE:
EU Regulatory Conformance
We, Elettromedia s.r.l., hereby declare that this device is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU.
Technical Specifications:
- Operating temperature: 0 ÷ 55 °C
- Frequency range: 2402-2480MHz
- Max. RF Output Power: < 10dBm
- Hardware version: R01
- Software version: R1.0
RF Exposure:
This equipment complies with radiation exposure limits set forth for an
uncontrolled environment.
Note: This product can be used in EU countries without any restrictions.
Manufacturer information:
Company name: ELETTROMEDIA Address: 62018 Potenza Picena (MC) Italy
Strada Regina km 3,500
Tel: T +39 0733 870 870
Web: www.elettromedia.it