IKEA ICPSW24-7-3 ORMANÄS LED Strip Smart Instruction Manual
- June 14, 2024
- Ikea
Table of Contents
IKEA ICPSW24-7-3 ORMANÄS LED Strip Smart
Specifications:
- Power Supply Unit Type : ICPSW24-7-3
- Input : 100-240 VAC, 50/60 Hz, 0.11 A
- Output: 24.0 VDC, 0.29 A, max 7 W
- Dimension: 55x44x25 mm
- Weight: 52 g
- Type of light source(s): LED
- Efficiency in full-load : 81%
- No-load power consumption (Pno): 0.05 W
- Standby power consumption (Psb): N/A
- Suitable as a dimmer for light sources : No
Product Usage Instructions
Getting Started:
- Connect your product to the mains or plug the power cable into the wall socket.
- Pair the light source with a steering device:
- Ensure the light source is installed and the main power switch is on.
- Hold the steering device within 5 cm of the light source.
- Press and hold the pairing button for at least 10 seconds until the light flashes to indicate successful pairing.
- You can pair up to 10 light sources with one steering device. Pair them individually and disconnect those already paired if they are close to each other.\
FEATURES
Remote Control
Using the Remote Control
You can switch between 9 colors and white lights with the remote control. For more options, use the IKEA smart hub and IKEA Home smart app for a total of 20 colors and white lights.
Factory Reset:
If needed, perform a factory reset by inserting a paper clip into the reset hole and applying slight pressure.
Care Instructions:
Wipe clean with a damp cloth. Avoid abrasive cleaners or chemical solvents to prevent damage.
FAQ
- Q: Can this light source be used with standard dimmers?
- A: No, this light source should only be used with IKEA Smart lighting products and not with standard dimmers.
Getting started
Connect your product to the mains or plug the power cable into the wall socket.
Before you can use your light source you’ll need to pair it with a steering device.
- Make sure that your light source is installed and the main power switch is turned on.
- Hold the steering device close to the light source you want to add (no more than 5 cm away).
- Press and hold the pairing button for at least 10 seconds. A red light will shine steadily on the steering device. Your light source will begin to dim and finally flash one time to indicate that it has been successfully paired.
Up to 10 light sources can be paired with 1 steering device. Make sure to pair them one at a time. If the light sources are close to each other, disconnect those that have already been paired from the main power switch.
With the remote control, you can switch between 9 colors and white lights. With the IKEA smart hub and the IKEA Home smart app, you get a total of 20 colors and white lights.
Getting started with DIRIGERA hub
Download the IKEA Home smart app and follow the instructions on the screen. For Apple devices, download the app using the App Store. For Android devices, download the app using the Google Play store.
CAUTION:
DO NOT USE WITH STANDARD DIMMERS. This light source will not operate properly when connected to a standard (incandescent) dimmer or dimming control. Only controllable by IKEA Smart lighting products.
How to factory reset your product If the product does not respond or if you want to un-pair the product from a steering device you might have to make a factory reset. The product is forced to factory reset by carefully inserting a paper clip end or similar in the small hole (marked RESET) and applying a slight pressure.
IMPORTANT!
- The product is for indoor use only and can be used in temperatures ranging from 5 °C to 40 °C.
- Do not leave the product in direct sunlight or near any heat source, as it may overheat.
- The declared radio range between the unit and the steering device is measured in the open air.
- Different building materials and placement of the units can affect the wireless connectivity range.
Care Instructions
Wipe clean with a damp cloth. Never use abrasive cleaners or chemical solvents as this can damage the product.
Save these instructions for future use.
Technical data
- Type: L2112 ORMANÄS
- Input: 24.0 VDC, 0.21 A, 5 W
- Max lumen output : 640 lm
- Radio range : 10 m in open air.
- Operating frequency: 2405- 2480 MHz
- Output power (EIRP): max 10 dBm
Power Supply Unit
- Type: ICPSW24-7-3
- Input: 100-240 VAC, 50/60 Hz, 0.11 A
- Output: 24.0 VDC, 0.29 A, max 7 W
- Dimension: 55x44x25 mm
- Weight: 52 g
- Type of light source(s): LED
- Efficiency in full-load : 81%
- No-load power consumption (Pno): 0.05 W
- Standby power consumption (Psb): N/A
- Suitable as dimmer for light sources : No
- Manufacturer: IKEA of Sweden AB
- (commercial registration number: 556074-7551)
- Address : Box 702, SE-343 81 Älmhult, SWEDEN
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
AGREE PAR L´ANRT MAROC
Numero d’agrément: MR00036683ANRT2023
Date d’agrément: 08/02/2023
© Inter IKEA Systems B.V. 2023