PLASTXAL NEO System Tilt and Turn Window Installation Guide
- June 13, 2024
- PLASTXAL
Table of Contents
PLASTXAL NEO System Tilt and Turn Window
Specifications
- Product Name: PVC European Tilt & Turn Window
- System: NEO System (U.S. Market)
- Manufacturer: Plastixal Windows
- Material: PVC
- Country of Origin: Poland
Product Usage Instructions
Pre-Installation
- Safety First: Wear protective gear throughout the process.
- Measurements: Take precise measurements of the window opening from different points. Subtract 1/2 inch for construction or 1/4 inch for replacements.
- Preparation: Clear the opening of debris and ensure it is level and plumb.
Installation Steps
- Positioning the Frame: Place the PVC window frame in the opening, using shims to adjust for level and plumb.
- Mounting Anchor Plate: If using a mounting anchor plate, position it on the sill before placing the window frame.
- Securing the Frame: Drill pilot holes throughthe frame and into the surrounding structure. Secure with longscrews.
- Checking Alignment: Use a spirit level to ensure vertical and horizontal alignment.
- Attaching the Openers: Install the Tilt &Turn openers following the manufacturer’s instructions.
- Insulating: Fill gaps with polyurethane foam and sealant to prevent moisture ingress.
- Finishing Touches: Clean excess foam and sealant, finish interior with appropriate trim and paint if necessary.
Post-Installation
Ensure all components are securely in place and functioning correctly.
Refer to the installation manual for any specific post-installation checks.
Tips and Warnings
- Regular maintenance is essential for optimal performance.
- Contact Home Depot, USA rep or installationhelp@poltex.com for assistance.
Maintenance
Regular maintenance is crucial for the longevity and performance of your
PVC European Tilt & Turn Window. Follow the manufacturer’s guidelines for
maintenance tasks.
Scan the code below for a quick installation video
PVC European Tilt & Turn Window Installation Guide
For NEO System in the U.S. Market
Tools and Materials Required
- Safety gloves and glasses
- Measuring tape (in inches)
- Carpentry pencil, L-square
- Drill machinery and wood/masonry drill bits
- Chisel
- Spirit level
- Vacuum cleaner
- PVC European Tilt & Turn window (NEO System)
- Window sealant
- Long screws (6-8 inches recommended)
- Polyurethane foam
- Mounting anchor plate (metal flashing) for additional support
- Caulk gun
- Hearing protection
- Drop cloth
Pre-Installation
- Safety First : Wear protective gear throughout the process.
- Measurements: Take precise measurements of the window opening from different points to account for any irregularities. Subtract 1/2 inch for new constructions or 1/4 inch for replacements to ensure a snug fit.
- Preparation: Clear the opening of debris and ensure it is level and plumb.
Installation Steps
- Positioning the Frame: Place the PVC window frame in the opening, using shims to adjust for level and plumb. Protect the frame from potential damage during handling.
- Mounting Anchor Plate: If using a mounting anchor plate (metal flashing), position it at the sill before placing the window frame. This provides additional support and helps with water drainage.
- Securing the Frame : Drill pilot holes through the frame and into the surrounding structure. Secure the frame with long screws, taking care not to overtighten and warp the frame.
- Checking Alignment: Use a spirit level to ensure the window is perfectly vertical and horizontal.
- Attaching the Openers: Install the Tilt & Turn openers, following the manufacturer’s instructions, ensuring smooth operation.
- Insulating: Fill gaps between the frame and the opening with polyurethane foam for insulation and sealant to prevent moisture ingress.
- Finishing Touches: Once the foam and sealant are set, clean up any excess and finish the interior with appropriate trim and paint if necessary.
Post-Installation
- Inspection: Ensure all moving parts operate smoothly.
- Sealing: Apply exterior-grade sealant around the outside of the window frame for weatherproofing.
- Cleaning: Use a non-abrasive cleaner to remove any installation marks from the window.
Tips and Warnings
- Do Not Over Tighten Screws: This can warp the frame.
- Allow Foam to Expand: Give the insulation foam time to expand and cure before trimming.
- Manufacturer’s Instructions: Always refer to the NEO system’s specific installation manual for any particular instructions related to the window model.
Maintenance
- Regularly check the function of the Tilt & Turn mechanism.
- Inspect sealant and weatherstripping for integrity.
- Clean the window frames with a mild detergent and water.
For additional assistance and guidance, please contact our Home Depot, USA rep; @ installationhelp@poltex.com
MORE INFORMATION
- Head Office:
- ADDRESS: Stare Bozejewo 44 Wizna 18-430 Podlaskie, POLAND
- Phone: +48 86 216 44 18
- info@plastixalwindows.com
- www.plastixalwindows.com
FAQ
- How do I know if the window is properly aligned?
- Use a spirit level to ensure the window is perfectly vertical and horizontal after installation.
- What should I do if I encounter issues during installation?
- Contact our support team at installationhelp@poltex.com for guidance and assistance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>