rescue-tec AU-01855 Smoky Multi Socket User Manual
- June 8, 2024
- rescue-tec
Table of Contents
rescue-tec AU-01855 Smoky Multi Socket User Manual
Introduction
Congratulations on the purchase of your Smoky Multi Socket!
The Smoky Multi Socket is a special effects appliance that simulates a
malfunction in a junction box. The junction box produces smoke and a soft
crackling sound. Purpose of the practice appliance is that the person who is
being trained will disconnect the distributor plug from the mains voltage.
After it ‘simmers’ a bit more the appliance will stop smoking and the exercise
will have been completed correctly. The Smoky Multi Socket is very suitable to
test and develop the decisiveness of emergency aid staff. The appliance was
created for educational purposes and therefore should be used as such.
Prior to using it you should read this user manual thoroughly, in order for you to be fully informed about the use, working and the characteristics of the Smoky Multi Socket.
Safety measures & warnings
When using this appliance closely follow the instructions and guidelines, as described in this manual. Never change the order of the acts to be performed. In case anything concerning the use is not clear please contact FireSales.
Only adults who are informed about the content of this user manual should use this appliance. May only be used by experts in a professional exercise situation.
PLEASE NOTE: NEVER use this appliance in the presence of children and animals.
This is a practice appliance. Use this appliance only what it is designed for.
PLEASE NOTE: NEVER connect other plugs to the wire end of the Smoky Multi
Socket.
This electrical appliance is designed to be used indoors.
Only use the appliance in plugs with an earth connection.
The smoke unit works on 16 V; as a result it requires a special smoke liquid.
The location of the appliance needs to be:
- **** dry.
- free of dust and polluted particles.
- properly ventilated with smoke-free air.
- between 5 °C and 45 °C.
- have a humidity of less than 80%.
- free of vibrations.
- properly lit.
- a non-flammable surface.
- free of explosive gasses.
**** Place the appliance stabile on a flat surface and make sure the appliance cannot fall over.
**** Always place the appliance in an easily accessible location, so that the appliance can be turned off ‘quickly and easily’ without running the risk of the appliance falling over.
** Make sure that the appliance and the wires can be placed in a safe location so that no one can slip, trip or fall over it. Tape the wires to the floor if necessary. The smoke unit contains a liquid, if the appliance falls over this could lead to a SHORT CIRCUIT!**
**** The metal needle in the middle of the smoke unit is vulnerable. In case this part breaks down the appliance will be damaged beyond repair.
**** For your own safety you need to disconnect the appliance before filling up the smoke liquid.
** Make sure the smoke unit is NEVER** filled with liquids other than the
one prescribed. This can damage the appliance beyond repair.
Make sure you do not breath in the fumes of the liquid; this will damage your health.
Pay attention that you do not apply smoke liquid to the plugs. This can
cause a SHORT-CIRCUIT.
NEVER drink the smoke liquid. Keep it out of reach of children. In case of contacts with the eyes immediately rinse with plenty of water and consult a doctor. Contact a doctor if someone has ingested the smoke liquid. Show your doctor the packaging of the smoke liquid.
In order to dose even better it is recommended to first remove the air from the syringe by pointing the syringe upwards and carefully pressing until all the air has disappeared.
When the liquid has been placed in the smoke unit the bottle with smoke liquid needs to be sealed off immediately. Make sure the bottle with the childproof stopper is sealed off properly. Store it outside the reach of children.
If there is still liquid in the syringe after filling the smoke unit return this to the bottle. Always empty the syringe after use.
Clean the liquid on the casing with a dry cloth in the unlikely event that a surplus of smoke liquid has ended up in the smoke unit. If the metal needle is filling up with smoke liquid it takes a bit longer before the appliance will produce smoke. You can remove some liquid or wait until a sufficient amount has evaporated.
DO NOT touch the smoke unit during and after use. It becomes HOT.
NEVER place objects (cloth, etc) over the smoke unit when it is in use as
the smoke unit is hot and can cause burns and fire.
Only store the appliance in the packaging once all the liquid has been removed from the smoke unit and once the smoke unit has sufficiently cooled off.
Place wipes with smoke liquid that may have been used in the intended litterbin.
If the appliance is damaged you should not use the appliance.
NEVER open the appliance. This can cause electric shocks and will cancel any kind of warranty.
In the event service or repair is required this product can ONLY be opened by
a
FireSales technician; this is to prevent the risk of getting an electric
shock. If a problem occurs, disconnect the product from the mains voltage and
contact FireSales.
The manufacturer does not accept any responsibility for damage caused by not
(strictly) observing the safety measures and instructions in this manual or
for
carelessness during the use of the product listed in this document and
possible matching accessories.
Overview of the parts & technical information
- Junction box with 5 plugs
- Smoke unit
- Heating element (metal needle)
- LED indicator
- Wired remote control with on/off switch
- 10 ml smoke liquid
- 2 ml syringe
- User manual
-
Options / accessories:
Refill smoke liquid: Tiny Fluid 250ml.
Article number 009-002-001
Technical information: -
Voltage junction box: 230 Vac
-
Power junction box: 500 Watt
-
Protective class junction box: IP 20
-
Voltage smoke unit: 16 V
How to use
Operation (turn off)
When the machine is in use you can stop the smoke production at any time by turning the switch on the wired remote control off. The LED will be turned off. There are a few seconds delay between turning the appliance off and before it actually stops producing smoke.
The appliance will continue to produce smoke as long as there is smoke liquid
in the tank. To preserve the life span it is advisable to turn the Smoky Multi
Socket off as quickly as possible once the liquid has run out.
Malfunctions
| Problems | Possible cause | Solutions |
|---|---|---|
| Appliance does not turn on | No plug in the socket Not the right feedOn/off | |
| switch if turned off | Put the plug in an earthed socket Use a 230 V feedTurn |
the switch on
LED light is not burning| No plug in the socket Not the right feed On/off
switch if off LED light is defect| Put the plug in an earthed socket Use a 230
V feedTurn the switch onContact FireSales
No smoke from the smoke unit| No plug in the socket Not the correct feedOn/off
switch is turned off
Too much liquid in the smoke unit
No liquid in the smoke unit
Metal needle in the smoke unit is defect
| Put the plug in an earthed socket Use a 230 V feedTurn the switch on
Remove the plug from the socket.Make sure the smoke unit has cooled off- Wipe
away the liquid with a dry cloth- Remove the liquid with the syringe- Let
the liquid evaporatePut the plug in the socket and turn the switch on.
Remove the plug from the socketFill the smoke unit with liquid (max.0,8 ml)
Put the plug in the socket and turn the switch on.
Contact FireSales
Smoke production does not stop| On/off switch is turned on Plug is still in
socketA lot of smoke liquid in the smoke unit| Turn on/off switch off
immediately Remove plug from socketMake sure the smoke unit is cooled off and
then remove the remaining liquid from theunit
After care
It is recommended to remove the smoke liquid from the smoke unit after use.
You can do this by holding a cloth against the mouth and dripping the liquid
on the cloth by slanting the junction box or keeping it upside down. If you
have the Smoky Multi Socket in a fixed location make sure that the plug gets
removed from the socket. If the appliance is not used for more than two days
in a row it is recommended to remove the remaining smoke liquid.
Waste disposal
Electric appliances, accessories, liquids and packaging need to be collected and recycled separately or disposed off in an environmentally responsible manner.
Warranty provisions
The Smoky Multi Socket has a one-year warranty against product and manufacturing faults. Damage as a result of careless acting is not refunded. Repairs require expertise. It is therefore highly recommended to return the appliance to us in the event of a defect.
The warranty is cancelled if it becomes apparent that you or a third party opened the appliance or if you or a third party have applied modifi cations or adjustments of any kind without the explicit permission from the supplier. The warranty is also cancelled if you use smoke liquid that is not suitable for the 16 V smoke element.
Declaration of Conformity
EC Declaration of Conformity
Manufacturer
FireSales
De Stek 5
1771 SP Wieringerwerf
The Netherlands
declares that the Smoky Multi Socket, a multiple socket with a built-in smoke
generator, article number 025-012-002 is in compliance with the following EU
guideline: 2006/95/EG.
24-02-2012
Contact
In case of any questions you can contact:
FireSales
Klompenmakerstraat 19
1991 JJ Velserbroek
The Netherlands Belgium
info@FireSales.nl
www.FireSales.nl
FireSales Belgium
Laconiastraat 8
8000 Brugge
info@FireSales.be
www.FireSales.be
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>