Comfort-Aire PTAC Cooling Only With Electric Heat Owner’s Manual
- June 14, 2024
- Comfort-Aire
Table of Contents
Comfort-Aire PTAC Cooling Only With Electric Heat
PACKAGED TERMINAL AC/HP
- PTAC – Cooling only with electric heat
- PTHP – Heat pump with electric heat
Our 42” packaged terminal air conditioners and heat pumps provide year-round comfort, room by room, for hotels, motels, apartments, office buildings, schools, nursing homes and more. Designed for quick installation in most 16″ x 42″ wall sleeves, they’re great for new construction as well as replacements. Combining attractive appearance with state-of-the-art technology, these units minimize energy usage while ensuring guest comfort. Available in cooling only and heat pump versions, all models include electric heat as standard. For installation flexibility, the unit is designed to be controlled either by an on-board control panel or by a wired remote thermostat. A plug-in adapter for this thermostat is included. The unit can also be set up for a wireless thermostat or front desk control with the easy-to-connect interface. All functions of the unit can be controlled in-room using the easy-to-understand touchpad. LEDs correspond to mode and fan operation, indicating unit status, and the setpoint
FEATURES
- Standard Efficiency —Provides energy efficiency and economy of cost in a streamlined and attractive modern design showcasing state-of-the-art features.
- Environmentally Friendly —Our packaged terminal units come charged with the environmentally friendly R-32 refrigerant
- Room Freeze Protection —When the unit senses temperatures 50°F or lower for three minutes, heat pump models automatically activate the heating mode
- Versatile Configuration —The unit can be optimized to a specific application through the use of dipswitches and the digital keypad; selections include setpoint limiting, front desk control, wall thermostat control, and more
- Quiet Operation —Indoor sound reduction is achieved through the unit’s two permanently lubricated fan motors; the compressor has rubber grommet mounting
- Fresh Air Control Arm —Allows outdoor air into room through the filtered vent, 85 CFM
- Easy To Service —On-board computer diagnostics help prolong the life of the unit and simplify service; LED indicator flashes error codes
- Seacoast models —with corrosion-resistant components, see specifications inside
MODEL NOMENCLATURE|
---|---
P T| A C| 1 2| H| 1| 3 0| A
Package Terminal Unit with| AC = Cooling Only| Capacity|
Source| Power| Electric Heat| Series/
Electric Heat| HP = Heat Pump| BTUH x 1000|
Code| 1 = 208/230-1-60
2 = 265-1-60
| 30 = 3.0 kW
50 = 5.0 kW
| Revision
PERFORMANCE AND ELECTRICAL DATA
208/230V COOLING ONLY WITH ELECTRIC HEAT
FEATURE| PTAC07H130A| PTAC09H130A| PTAC12H130A|
PTAC12H150A| PTAC15H130A| PTAC15H150A
---|---|---|---|---|---|---
Cooling BTUH| 7,200/7,300| 9,000/9,200| 11,800/12,000|
11,800/12,000| 14,500/14,700| 14,500/14,700
EER| 13.1| 11.3| 10.7| 10.7| 10.6| 10.6
Cooling Amps| 3.1/3.4| 4.3/4.9| 5.5/6.1| 5.5/6.1| 7.5/8.9| 7.5/8.9
Max. Current Amps| 3.6| 5.2| 7.7| 7.7| 11.0| 11.0
Cooling Watts| 550/560| 780/790| 1,060/1,080| 1,060/1,080|
1,370/1,390| 1,370/1,390
Electric Heater kW @ 208/230| 2,150/2,580| 2,150/2,580| 2,897/3,500|
4,100/5,000| 2,897/3,500| 4,100/5,000
Elec. Heat BTUH @ 230V| 7,800| 7,800| 10,900| 15,000|
10,900| 15,000
Power Cord| LCDI (6-15P)| LCDI (6-20P)| LCDI (6-20P)| LCDI (6-20P)|
6-20P| 6-20P
Airflow CFM| 346| 430| 432| 432| 431| 431
Indoor Sound Max dB(A)| 51| 50| 52| 52| 51| 51
Out. Sound Max dB(A)| 67| 63| 67| 67| 65| 65
Net Wt./Shipping Wt.| 98/107| 97/106| 104/113| 104/113| 106/115|
106/115
208/230V HEAT PUMP WITH ELECTRIC HEAT
FEATURE| PTHP07H130A| PTHP09H130A| PTHP12H130A|
PTHP12H150A| PTHP15H130A| PTHP15H150A
---|---|---|---|---|---|---
Cooling BTUH| 7,100/7,200| 9,200/9,300| 11,800/12,000|
11,800/12,000| 14,500/14,700| 14,500/14,700
EER| 13.1| 11.4| 10.5| 10.5| 10.6| 10.6
Cooling Amps| 3.0/3.3| 4.2/4.6| 5.3/5.8| 5.3/5.8| 6.5/7.4| 6.5/7.4
Max. Current Amps| 3.6| 5.2| 8.0| 8.0| 11.0| 11.0
Cooling Watts| 540/550| 810/820| 1,020/1,040| 1,020/1,040|
1,370/1,390| 1,370/1,390
Heat Pump BTUH| 6,000/6,200| 7,900/8,100| 10,500/10,800|
10,500/10,800| 13,200/13,500| 13,200/13,500
C.O.P. @ 47°F| 3.60| 3.40| 3.20| 3.20| 3.20| 3.20
Heating Amps| 2.6/2.7| 3.9/4.3| 5.0/5.3| 5.0/5.3| 6.0/6.4| 6.0/6.4
Heating Watts| 460/480| 690/720| 850/890| 850/890| 1,120/1,170|
1,120/1,170
Electric Heater kW @ 208/230| 2,150/2,580| 2,150/2,580| 2,897/3,500|
4,100/5,000| 2,897/3,500| 4,100/5,000
Elec. Heat BTUH @ 230V| 7,800| 7,800| 10,900| 15,000|
10,900| 15,000
Power Cord| 6-15P| 6-20P| 6-20P| 6-20P| 6-20P| 6-20P
Airflow CFM| 355| 364| 439| 439| 417| 417
Indoor Sound Max. dB(A)| 51| 50| 52| 52| 53| 53
Out. Sound Max dB(A)| 67| 64| 67| 67| 67| 67
Net Wt./Shipping Wt.| 102/111| 100/108| 111/119| 111/119|
114/123| 114/123
DIMENSIONS
OPERATING VOLTAGE
UNIT DIMENSIONS
OPERATING VOLTAGE
208/230V COOLING ONLY WITH ELECTRIC HEAT—SEACOAST MODELS
FEATURE| PTAC12H130ASC| PTAC12H150ASC| PTAC15H130ASC|
PTAC15H150ASC
---|---|---|---|---
Cooling BTUH| 11,800/12,000| 11,800/12,000| 14,300/14,500|
14,300/14,500
EER| 10.8/10.5| 10.8/10.5| 10.0/10.2| 10.0/10.2
Cooling Amps| 5.4/5.1| 5.4/5.1| 7.0/6.4| 7.0/6.4
Max. Current Amps| 7.3| 7.3| 8.9| 8.9
Cooling Watts| 1100/1140| 1100/1140| 1450/1470| 1450/1470
Electric Heater kW @ 208/230| 3.0| 5.0| 3.0| 5.0
Elec. Heat BTUH @ 230V| 10236| 17060| 10236| 17060
Dehum. Pts/Hr| 2.32| 2.32| 3.59| 3.59
Power Cord| 20A 6-20 P| 30A 6-30 P| 20A 6-20 P| 30A 6-30 P
Airflow CFM| 405/333| 405/333| 405/370| 405/370
Indoor Sound Max dB(A)| 48/42| 48/42| 48/45| 48/45
Out. Sound Max dB(A)| 66| 66| 66| 66
Net Wt./Shipping Wt.| 108/121| 108/121| 112/126| 112/126
208/230V HEAT PUMP WITH ELECTRIC HEAT—SEACOAST MODELS
FEATURE| PTHP12H130ASC| PTHP12H150ASC| PTHP15H130ASC|
PTHP15H150ASC
---|---|---|---|---
Cooling BTUH| 11,800/12,000| 11,800/12,000| 14,300/14,500|
14,300/14,500
EER| 10.6/10.5| 10.6/10.5| 10.0/10.2| 10.0/10.2
Cooling Amps| 5.4/5.1| 5.4/5.1| 6.8/6.3| 6.8/6.3
Max. Current Amps| 7.3| 7.3| 8.9| 8.9
Cooling Watts| 1100/1140| 1100/1140| 1400/1420| 1400/1420
Heat Pump BTUH| 10,800/11,000| 10,800/11,000| 13,200/13,600|
13,200/13,600
C.O.P. @ 47°F| 3.50/3.30| 3.50/3.30| 3.30/3.30| 3.30/3.30
Heating Amps| 4.5/4.2| 4.5/4.2| 5.6/5.2| 5.6/5.2
Heating Watts| 900/950| 900/950| 1155/1180| 1155/1180
Electric Heater kW @ 208/230| 3.0| 5.0| 3.0| 5.0
Elec. Heat BTUH @ 230V| 10236| 17060| 10236| 17060
Power Cord| 20A 6-20 P| 30A 6-30 P| 20A 6-20 P| 30A 6-30 P
Dehum. Pts/Hr| 2.32| 2.32| 3.59| 3.59
Airflow CFM| 405/333| 405/333| 405/370| 405/370
Indoor Sound Max. dB(A)| 48/42| 48/42| 48/45| 48/45
Out. Sound Max dB(A)| 66| 66| 66| 66
Net Wt./Shipping Wt.| 110/123| 110/123| 112/126| 112/126
For installations in or near coastal locations, 12,000 and 15,000 BTUH models are available in a “Seacoast” version built to withstand such extreme conditions. Corrosion-resistant coatings are applied to components, including the condenser fins, outdoor fan motor enclosure, base pan, and back grille. Additional corrosion protection is provided by stainless steel screws and aluminum endplates. Treated outdoor sections successfully meet 48-hour salt spray test requirements, as well as anti-rust testing. Seacoast models meet the same stringent performance specifications as all our PTACs/ PTHPs, and are designated by “SC” at the end of the part number.
FEATURES
OUTSTANDING WARRANTY COVERAGE
All Comfort-Aire PTACs/PTHPs are covered by a one year parts and labor
warranty. In addition, the sealed system and all functional parts are
warranted to be free from defects in material and workmanship for a total of
five years. See our website for warranty details.
Breakdown Wall Sleeve
- P-a rt No. 7602-500F – Galvanized Steel
- Part No. 7602-500PF – Polymer
Our 42” wall sleeve is constructed from galvanized steel and powder-coated for durability and aesthetic appeal. The wall sleeve is insulated and factory spot welded to minimize breaches in the cabinet surface. It contains four chassis mounting holes, four grille mounting holes and two drain holes for an optional drain kit.
Dimensions W x H x D (inches)
- 42” x 16” x 147/8”
Air Deflector
Part No. 7602-508F
The PTAC Air Deflector directs air up and away from overhanging drapes. It saves energy by eliminating trapped airflow between the window and the curtain while increasing guest comfort levels. It is easy to install with no tools needed.
PTAC/PTHP ACCESSORIES
Sub Base
- Part No. 7602-509F – Unpowered
- Part No. 7602-509F-20A – 20 Amp Receptical
- Part No. 7602-509F-30A – 30 Amp Receptical
Made from galvanized steel and powder coated, our sub-base has only one piece, plus the skirting, for faster and more economical installation. Each kit contains: Sub-base main body, left and right side skirt, adjusting feet, and installation instructions.
Dimensions W x H x D (inches)
- 423/8” x 33/4” x 45/8”
Stamped Grille
Part No. 7602-501F
Our stamped grille is made from durable, lightweight aluminum and made to fit a standard 42” wall sleeve. Vents match our units to facilitate proper airflow, and must used with Comfort-Aire® PTACs.
Dimensions W x H x D (inches)
417/8” x 153/8” x 3/8”
Architectural Grille
- Part No. 7602-505F
Our architectural grille fits a standard 42” wall sleeve. It’s formed from durable aluminium for weight reduction and weather resistance and powder coated for greater durability. Louvers are connected with high tensile rods. The grille comes factory assembled and includes four attachment points and two discharge air-shaping deflectors.
Dimensions W x H x D (inches)
42” x 153/4” x 13/8”
Polymer Grille
Full polymer grille with stainless steel hardware is ideal for any location
where corrosion is an issue, especially coastal areas. Available in white,
beige, alpine beige, and dark bronze.
Dimensions W x H x D (inches)
42” x 157/8” x 11/8”
Photos may not portray actual color.
Grilles match our units to facilitate proper airflow, and must used with
Comfort-Aire® PTACs.
PTAC Remote Control
Part No. 7602-512
Designed to operate with our PTAC/PTHP models, this remote controls mode, temperature, fan speed, and has timer function.
Dimensions W x H x D (inches)
17/8” x 5” x 1”
Thermostat
- Part No. 7800-200 – used with PTAC
- Part No. 7800-201 – used with PTHP
This thermostat is a digital, mercury free, wired, non-programmable, electronic thermostat, compatible with PTAC/PTHP models.
Dimensions W x H x D (inches)
41/2” x 33/4” x 11/16”
Wireless Wall Thermostat
Part No. 7602-536A
This thermostat operates our PTAC/PTHP line, without the need to run control wires. Contains all basic thermostat functions.
Dimensions W x H x D (inches)
45/8” x 33/4” x 1”
Lock Cover
Part No. 7602-535
Designed for use with duct kits, where control access is not available, or any situation where wired or wireless remote system control is desired or restricted access is required. Key access is provided for service.
Shipping Dimensions W x H x D (inches)
77/8” x 77/8” x 21/64”
Drain Kit
Part No. 7602-506F
The drain kit, including both 90° drain tube and a 180° drain tube, can be used for either an internal or external drain and can be attached to one of two available outlets on the wall sleeve. The mounting plates are made from galvanized steel and powder-coated to match the wall sleeve.
Main Duct Kit
Part No. 7602-511F
The lateral duct kit contains everything needed to convert a PTAC or PTHP for heating/cooling an adjacent room. The one-piece plenum attaches to the wall sleeve with brackets (included) and fits over the unit’s air discharge grille. The extension duct can be installed for left or right-side duct applications, with a maximum extension of 4 feet. Both the plenum and the duct extension are constructed of galvanized steel with a painted finish, and they are fully lined with insulation. The air volume baffle can be adjusted to allow a 75/25 to 80/20 airflow split between the primary and secondary (adjacent) rooms. In addition to the plenum, extension duct and brackets, the kit includes a wall register, wall trim kit, end cap, hardware and instructions.
Dimensions
- Plenum: 441/16” W x 71/8” D x 71/2” H (tallest point)
- Extension: 475/16” W x 7” D x 31/2” H
- Wall Register : 81/2” W x 51/4” H
Due to ongoing product improvements, specifications and dimensions are subject to change and correction without notice or incurring obligations. Determining the application and suitability for use of any product is the responsibility of the installer. Additionally, the installer is responsible for verifying dimensional data on the actual product before beginning any installation preparations. Third-party incentive and rebate programs have precise requirements for product performance and certification. All products meet applicable regulations in effect on the date of manufacture; however, certifications are not necessarily granted for the life of a product. Therefore, it is the responsibility of the applicant to determine whether a specific model qualifies for these incentive/rebate programs.
PTAC models in this brochure are certified directly with the United States Dept. of Energy (D.O.E.) as meeting specifications shown.“This product complies with all California product labelling laws including, but not limited to, the Safe Drinking Water and Toxic Enforcement Act of 1986, more commonly known as Proposition 65.”
2024 MOTORS & ARMATURES, Inc.
MARS is a registered trademark of Motors & Armatures, Inc. Comfort-Aire is a
registered trademark of Motors & Armatures, Inc.1900 Wel/worth Ave., Jackson
MI 49203 • 517.787.2100 • www.comfort-aire.com