PEPPER JOBS GLK-UC2X V2 Quad Core Media Mini PC User Guide
- June 12, 2024
- PEPPER JOBS
Table of Contents
PEPPER JOBS GLK-UC2X V2 Quad Core Media Mini PC User Guide
Product Overview
Introduction
Thank you for purchasing PEPPER JOBS GLK-UC2X!
GLK-UC2X is a Quad-Core Media Mini PC powered by Intel® latest generation Gemini Lake N4120 processor: It has some great improvements over its predecessor which include:
- Doubling the CPU cache to 4M for better system performances;
- A new GPU (UHD 600) that supports 4K 60Hz HEVC 10-bit & VP910-bit video decoding;
- Integrated HDMI 2.0 video output with HDCP 2.2;
- Hardware decode/encode for Google Hangouts, Chrome browser, MS Edge browser, and You Tube;
- DDR4 support for higher memory bandwidth and better performances;
GLK-UC2X support up to 3 display of up to 4K 60Hz simultaneously via HDMI, mini DP and USB-C output, which makes it the strongest entry level PC ever!
We hope you enjoy this piece of nice gadget that we have built and if you have any questions or feedback regarding this product, please don’t hesitate to join our forum discussion at.
Specifications
NOTE: This symbol with the signal word “NOTE”
Provides additional useful information.
Note 1: NV Me M.2 SSD is supported but limited to PC le Gen 2 x1 speed.
Note 2: The USB-C video output does NOT support hot-plug and does NOT contain
native audio signal.
-
Connecting to power source
There are 2 ways to supply DC power to GLK-UC2X:
1.) By connecting to the bundled DC power adapter (12V/3A)
NOTE: Please restart the PC if you changed the power source from PD input to DC input or you want to use USB-C port for display or data output. -
Connecting to a video input source
GLK-UC2X support up to a maximum of 3 displays simultaneously. To obtain a video output, please connect GLK-UC2X to at least one video input source such as monitor or TV via the HDMI port, mLm DP port or USB-C port, depending on the type of input that your display supports.
NOTE: -
The USB-C video output does NOT support hot-plug and does NOT contain native audio signal.
(this is a physical limitation of eDP signal). -
Please connect USB-C cable to your monitor BEFORE connecting to DC power.
-
Connecting to peripheral input devices
Please connect a keyboard and mouse set to the USB 3.1 Gen 1 port of GLK-UC2X. Alternatively, you may also connect the USB receiver Keyboard/ Mouse/W10 GYRO remote.
NOTE: USB 3.1 Gen 1 signal frequency may have impact on 2.4 GHz wireless devices, please visit: https://www.intel.com/contenVwww/us/en/io /universalserial-bus/usb3-frequency-interference-paper.html
and refer to the white paper. -
Power on the device
Press and hold down the power button for approximately -2 second to turn on the mini PC. -
SSD Upgrade
GLK-U2CX has been designed to allow easy access for upgrading the storage.
SSD Upgrade:
GLK-UC2X supports M.2 2260/2280 SSD with SATN NVMe interface. Unscrew the SSD cover with a screwdriver and remove the SSD cover, you may install the self- purchased M.2 SSD to the M.2 SSD slot, apply one screw to secure the SSD, then put the SSD cover back to its original position, and put the screw back to lock the cover in place.
NOTE: NVMe M.2 SSD is supported but limited to PCle Gen 2 x1 speed.
FCC statement:
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used ln accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.