IKEA PELLEPLUTT Foam Mattress for Cot Instruction Manual
- June 12, 2024
- Ikea
Table of Contents
IKEA PELLEPLUTT Foam Mattress for Cot
WARNING
USING INSTRUCTION
Product Specifications
- Suitable for cots with inner dimensions 60×120 cm
Product Usage InstructionsAssembly and Maintenance Do not use the product if
any part is broken, torn, or missing.
Use only spare parts approved by the manufacturer. A compressed product will
assume its proper shape and volume within 3-4 days. Airing the product after
unpacking will help eliminate any lingering smell.
Cover care: The cover is machine washable. To re-fit the cover easily,
fold the mattress in the middle. Dry the product without using a heat source
like a hairdryer or radiator.
Child-Safe Zip
The zip fastener has no tab to prevent children from opening the cover. Open
and close the zip fastener by pushing a paper clip through the loop on the
slide. Always remove the paper clip afterwards.
Important Read Carefully
Save for future use
- IKEA of Sweden, Box 702, S-343 81 Älmhult
- Complies with EN 16890:2017+A1:2021.
WARNING
- Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot (crib and suspended bed).
- Do not use more than one mattress in the cot (crib and suspended bed).
- Suitable for cots with inner dimensions 60×120 cm.
- Do not use the product if any part is broken; torn or missing and use only spare parts approved by the manufacturer.
- A compressed product assumes its proper shape and volume within 3-4 days. The material has a distinctive smell that may linger after unpacking.
- Airing the product will help to eliminate the smell.
Care instruction
- The cover is machine washable. It is easier to re-fit the cover again if you fold the mattress in the middle.
Advice when drying
- Dry without the use of a heat source (e.g. hairdryer or radiator).
Child-safe zip
- The zip fastener has no tab. This is to prevent children from opening the cover and putting the contents in their mouths. Open and close the zip fastener by pushing, for example, a paper clip through the loop on the slide. Important!
- Make sure you always remove the paper clip afterwards.
Frequently Asked Questions
- Q: Can I use this product for a cot with dimensions other than 60×120 cm?
- A: No, this product is specifically designed for cots with inner dimensions of 60×120 cm.
- Q: How can I get rid of the distinct smell of the material?
- A: Airing the product after unpacking will help eliminate the smell. You can also wash the cover if needed.
- Q: How should I dry the product?
- A: Dry the product without using any heat source like a hairdryer or radiator to prevent damage.