Beijer CloudVPN Gateway Router User Guide
- June 20, 2024
- Beijer
Table of Contents
Beijer CloudVPN Gateway Router
Create Your Account
Get started with the CloudVPN Gateway by creating an account on CloudVPN service in acirro+. Set up your own user and company account by visiting cloudvpn.acirroplus.com.
Get Config
Easily create the conguration file for your CloudVPN Gateway from your own user. Just go to Tools > Start conguration and start the self-explaining wizard. Save the downloaded file to a USB flash drive (we do no include USB Drive) using the exact filename router.conf.
Get Config
No matter your situation, you can always connect your machine to the cloud.
The CloudVPN Gateway provides wired (Ethernet), 4G or Wi-Fi connectivity
options.
Registration starts immediately upon inserting the USB flash drive. Once the
ACD led status is steady blue, the CloudVPN Gateway is connected to the
CloudVPN service in acirro+ and will automatically show up in your company
account.
IMPORTANT
Only insert the SIM card when the CloudVPN Gateway is turned off.
Ready. Set. Go!
You have now successfully installed your CloudVPN Gateway. The CloudVPN
Gateway is designed for and seamlessly integrated with the CloudVPN service in
acirro+.
Any further configuration can be handled from your own IIoT account. The
CloudVPN service in acirro+ offers a multitude of services. Deliver remote
service, monitor your machine, set up alerts, and create high-end data
reports.
Troubleshooting Front Panel LEDs
LED Status Indicators
The CloudVPN Router has two LEDs for router status: one signal LED (3G, 4G, Wi-Fi signal) and one activity LED. The CloudVPN Router requires approximately 2 minutes to boot up and set up a secure connection.
Signal LED
| Signal | Colour | Description |
|---|
| Blinking blue| Initializing cellular module
| Blinking red 1 pulse| No reception or unable to connect to network (APN or SSID may be incorrect)
| Blinking red 2 pulses| PIN invalid or PUK required (a phone is required to unlock SIM card with PUK)
| Blinking red 4 pulses| SIM card is invalid or missing
Signal| Colour| Description
---|---|---
| Constant red| Connected, poor reception
| Constant purple| Connected, medium reception
****| Constant blue| Connected, good reception
Activity LED
| Signal | Colour | Description |
|---|---|---|
| **** | Constant red | Booting up (may take 1-2 min) or not yet registered |
| Signal | Colour | Description |
| --- | --- | --- |
| Blinking red 1 pulse | Waiting for internet access | |
| Blinking red 3 pulses | LAN/WAN conflict (conflicting subnets) | |
| Blinking red 4 pulses | Removed from the platform (re-insert USB flash drive |
to register again)
| Blinking red 5 pulses| Previously registered to the acirro+ remote access
(remove from the acirro+ remote access and register again)
| Blinking blue 1 pulse| Connecting to the acirro+ remote access
| Blinking blue 2 pulses| Setting up a VPN connection
| Constant blue| Active VPN connection to the acirro+ remote access
Reset To Factory Default Settings
WARNING
The following action cannot be undone! All settings will be reset to factory default.
The CloudVPN Router can be reset to the factory default settings by pressing and holding the reset button on top for 5 seconds. The ACT LED will blink while the reset button is pressed. Upon releaseof the button, the ACT LED will rapidly blink if the button was pressed long enough to trigger a reset. Wait for the CloudVPN Router to restart. You can then configure the CloudVPN Router again.
REMOVE PREVIOUS REGISTRATION
If the CloudVPN Router was previously registered on the acirro+ remote access you’ll have to remove it from the acirro+ remote access before you can register it again.
General Specifications
| Ports | 5x GbE (4x LAN, 1x WAN), 1x USB 2.0 |
|---|---|
| Power supply | 12-24 VDC +/- 20% LPS 2A |
| Power consumtion | 10 W max, about 2.5-5W* idle |
| Temperature range | -20 °C to + 65 °C |
| Dimensions | 111 x 95 x 28 mm |
| Physical specs | Metal case, IP20, DIN rail mountable |
| Certifications | ****
Warranty| Two years
CloudVPN service in acirro+| Lifetime access included
* Variant dependent: Ethernet only (2.5W), other variants (5W).
Warning
The CloudVPN Gateway allows the user to remotely connect to industrial control equipment via Ethernet, Wi-FI, and cellular network connections. The remote user may fully operate and monitor the local control system and affect the function and control of the application, similar to a local operator. Proper Control, Security and Safety procedures should be considered and implemented when utilizing the remote access feature.
Wi-Fi and 4G Models
The antenna used with this transmitter must be installed with a separation
distance of at least 20 cm from all persons and must not be co-located or
operated in conjunction with any other antennas or transmitters.
Only an antenna tested with the wireless transmitter or a similar with equal
or lesser gain may be used.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Connectivity Specifications
| Model | Wi-Fi | Cellular |
|---|---|---|
| CloudVPN Gateway Eth | ||
| CloudVPN Gateway Eth + LTE | Region: Worldwide |
LTE: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B12 / B13 / B18 / B19 / B20 / B25 /
B26 / B28 / B38 / B39 / B40 / B41
WCDMA: B1 / B2 / B4 / B5 / B6 / B8 / B19 GSM: B2 / B3 / B5 /
B8
CloudVPN Gateway Eth + Wi-Fi| 802.11b/g/n Client + AP mode|
CloudVPN Gateway Eth + Wi-Fi + LTE| 802.11b/g/n Client + AP mode| Region:
Worldwide
LTE: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B12 / B13 / B18 / B19 / B20 / B25 /
B26 / B28 / B38 / B39 / B40 / B41
WCDMA: B1 / B2 / B4 / B5 / B6 / B8 / B19 GSM: B2 / B3 / B5 / B8
All models can connect via a wired connection (Ethernet cable).
Additional Help and Support
For additional product support and specifications, please visit cloudvpn.beijerelectronics.com for further details.
CUSTOMER SUPPORT
Head Office
Beijer electronics AB
Box 426201 24 Malmö, Sweden
www.beijerelectronics.com / +46 40 358600
