iJOY IJ10205 TRICHARGE 3 in 1 Wireless Charger User Manual
- June 13, 2024
- iJOY
Table of Contents
iJOY IJ10205 TRICHARGE 3-in-1 Wireless Charger
YOUR IJOY PRODUCT
- Thank you for purchasing and using the “IJOY 3in1 WIRELESS CHARGER”.
- Before using this product, carefully read this manual to operate at maximum benefit.
- Please ask your local dealer or call us if you have any questions.
- Wireless Charger x1
- Charging Cable x1
- User Manual x1
PRODUCT SPECIFICATIONS
Specifications
- 3in1 wireless charger
- Model No: 1J10205
- Material quality: ABS + Silicone
- Product size: 250.5x75x7.6mm
- USB Type-C Input: 9V 2A /5 V 2A
- Mobile phone output: 5W /7.5 / 10W / 15W
- Watch output: 2.5W
- Earphone output: 3W
- Compatibility: support mobile phones, earphones, and Watches that comply with the Qi standard.
BATTERY
BATTERY CAUTION
- The battery used in this device may present a risk of fire, explosion, or chemical burn if used incorrectly. Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
- Never disassemble the unit or attempt to remove the battery as that could cause leakage of alkaline solution or other electrolytic substances.
- Never expose the battery to any liquid. Never expose the battery to excessive heat such as direct light or fire.
- Always keep the battery out of the reach of infants and small children.
BATTERY DISPOSAL
- Please do not attempt to change the battery yourself. If the battery has died, you should follow the disposal instructions listed here.
- Never dispose of used batteries/electronics with ordinary solid wastes. Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the disposal of batteries/electronics.
- If there are no local regulations concerning battery/electronics disposal, please dispose of the device in a waste bin for electronic devices. Many electronics retailers now recycle batteries and other electronic components at no charge.
Steps for usage
- The device is connected to the power supply through the charging cable, and then it can be powered on.
- When charging the mobile phone, place the mobile phone flat in the mobile phone charging area to start charging the mobile phone.
- After fully charging, simply take off the mobile phone, during the charging process, if you need to terminate the charging, take it directly.
- When charging the Watch, place the Watch flat in the charging area to start charging the Watch.
- After fully charged, directly remove the Watch;
- During the charging process, if you need to terminate the charging, remove the Watch directly.
- When charging the Earphones, place the Earphones flat in the charging area to start charging;
- After fully charged, simply remove the Earphones;
- During the charging process, if you need to terminate the charging, remove it directly.
OTHER IMPORTANT SAFETY INFORMATION
- Disposal of old electronic & electronic equipment (Applicable in the European Union and other European Countries with separate collection systems)
- The trash can symbol (seen on the bottom) on the production indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for recycling of electronic equipment.
- By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling.
- For more detailed information about this product, please contact your local household waste disposal service or the shop where you purchased this item.
OVERVIEW
- Mobile phone output
- Magnetic fast charging ( 15W)
- LED indicator
- Type-C Input
- Earphone output (3W)
- Mobile phone output (5W)
- Watch output(2.5W)
Special Note
Recommended to use the supplied charging cable for the power supply, and not to use the original Mobile phone cable.
FCC ID STATEMENT
FCC ID: 2AJQ7TRICHARGE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for Class B digital devices, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements.
This equipment should be installed and operated with a minimum distance of 20
cm between the radiator and your body.
- Distributed by QUEST USA CORP.
- 495 Flatbush Ave Brooklyn, NY 11225
- © GOIJOY & JOY are registered trademarks of QUEST USA CORP.
- All other trademarks and trade names are the property of their respective owners.
- Designed by GOIJOY & IJOY in New York. All rights reserved QUEST USA
- CORP.
- Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>