Enrock EM265B High-Performance Water-Resistant Loudspeaker User Guide
- June 3, 2024
- Enrock
Table of Contents
Enrock EM265B High-Performance Water-Resistant Loudspeaker
INTRODUCTION
Thank you for purchasing this Enrock 6.5” 2-Way Speakers, Please read through these instructions carefully so you will know how to operate your model properly. Keep these instructions in a safe place for future references.
PACKAGE CONTENTS
- 5” 2-Way Speakers (2)
- Speaker Wire & Mounting Hardware Kit (2)
- User manual / Warranty Card (1)
SAFETY PROVISIONS
- Turning up the volume too high may cause you not to hear what’s around you. Avoid playing your music at the highest level.
- Use caution in possibly dangerous situations
- Do not operate mobile video equipment while driving a vehicle
- Start your volume control level at a low level and slowly turn up the volume to a comfortable listening level without ear discomfort or distortion.
- Immediately turn the power off and consult an installation expert if you notice strange noises, smoke or odor from this product. Continued use of a faulty unit may cause permanent damage to your system.
INSTALLATION PROVISIONS
- Always consult with a qualified installer
- Use only the installation parts provided with the speaker
- The Speakers have a weather resistant design, it should not be submerged in or under water under any circumstances
- When wiring directly to the vehicles batter, be sure to disconnect the batteries negative terminal wire before starting any wiring procedures, if extending the main power wire, it is suggested that an optional fuse and fuse holder (not included) with minimum rating of 10 Amperes be in-line with the positive battery terminal.
- The ground cable length should not exceed 18-inches
- Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without professional training and experience in electronic equipment and motorized vehicle accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
WIRE DIAGRAM
- Do not touch the speaker flex wire
- Secure all wiring with wire ties
- Properly seal connections to ensure water tight connections
LIMITED WARRANTY
Enrock warrants this product to be free from defects in material and workmanship for a period of 90 days from purchase. The Enrock product is sold with the understanding that the purchaser has independently determined the suitability of this product. This warranty is offered to the original purchaser of the product only. This warranty does not cover the product if physically damaged, subject to negligence or misuse, abuse, alteration, accident, or an act of GOD. This warranty does not apply to product which has water or physically damaged by accident or which has been misused, disassembled or altered.The original dated sales slip or proof of purchase will establish warranty eligibility. If the product should prove defective within the warranty period, return the product with proof of purchase to Enrock. Enrock, at its option, will replace or repair the product free of charge and return the product. In no event shall Enrock be responsible for claims beyond the replacement value of the defective products or in any way be liable or responsible for consequential or incidental damages. No implied warranties, whether for fitness or any particular use or otherwise, except as set forth above (which is made expressly in lieu of all other warranties) shall apply to products sold by Enrock. Enrock cannot be held responsible for discrepancies/inconsistencies that may occur due to automotive manufacturing changes or option.
PRIOR TO INSTALLING THIS PRODUCT
- To avoid potential shorts in the electrical system, be sure to disconnect the (-) battery cable before installation. Use this unit with a 12-volt battery and negative grounding only.
- Failure to do so may result in a fire or malfunction.
- When replacing the fuse, be sure to only use a fuse of the rating specified on this product.
- To avoid short-circuiting, cover any disconnected leads with insulating tape. It is especially important to insulate any unused wires, which if left uncovered may cause a short circuit. When connecting other devices to this product, refer to the manual for the product to be connected. The black cable is ground, make sure to connect the ground wire first.
- Ensure that the ground cable is properly connected to metal parts of the vehicles body frame or direct to the battery if your vehicle does not have a grounded chassis frame. The ground cable of this unit’s power amp and a second powered system must be connected to the frame separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire or malfunction.
SUGGESTED MOUNTING POSITIONS
The EM265C can be mounted in three different configurations: Always double check for mounting depth limitations never cut before you check,
FAQs
What makes a speaker more powerful?****
There is some correlation between speaker size and speaker loudness. The louder a speaker can get, especially with older sound systems, the bigger the speaker’s circumference. The maximum volume of sound that can be pushed out of speakers grows along with the physical diameter of the speakers.
What are the factors used for rating performance of speaker?****
The sensitivity rating and, consequently, the efficiency rating are important factors in determining the acoustic power output of a speaker. When a speaker uses 1 watt of power, speaker sensitivity ratings assess the sound pressure level of the speaker at a distance of 1 metre (on-axis).
How can I improve speaker performance?****
Place your speakers where they will sound best—level with your ears—leaving space between them and the wall to enhance the performance of the midrange and bass. To protect your music from floor vibrations if you don’t have space for stands, place your speakers on a layer of foam.
How long do high end speakers last?****
High-quality speakers typically survive up to 40–50 years before displaying any indications of degradation, depending on the materials they are composed of and the climatic conditions where the equipment is utilised.
What is the most important quality for a speaker to have?****
The capacity to be organised is among the most crucial traits of an effective speaker. You typically have a theme to focus on while giving any form of public speech. This could be done to share your thoughts, elaborate on your business, or simply to raise awareness of a certain problem.
How is speaker performance measured?****
The loudspeaker being tested should be driven with a sine wave signal that is steadily swept through the audible frequency range of 20Hz to 20kHz in an anechoic environment in order to obtain the best results. The output will then be recorded and plotted by a microphone positioned along a preferred axis in the loudspeaker’s far field.
What happens when speakers get too much power?****
The amount of electrical energy that speakers can transform into audio is a constraint. Generally speaking, damage is unlikely to occur if the amplifier generates more electrical energy than the speakers can handle. Instead, distortion or clipping may occur.
Do speakers improve sound quality?****
However, upgrading speakers in a subpar signal chain is still likely to result in an increase in sound quality. However, it will also make all of the audio’s shortcomings more obvious. If you are not driving high-end speakers with high- quality audio, you won’t get the most out of them.
How is speaker power calculated?****
V2/R (Volts x Volts Resistance), where V is the amplifier’s output voltage and R is the loudspeaker’s impedance in Ohms, is the formula used to determine the wattage delivered by an amplifier through a loudspeaker.
What happens if speakers don’t get enough power?****
The sound will be depressed dramatically and distorted. When there are louder transients, such a dynamic drum solo, the sound will distort. You might even hear a “snapping” sound if a loud transient drives the amplifier into clipping.
Can a speaker work without power?****
If loudspeakers feature built-in wireless receivers, active transducer elements, or amplifiers, they need power. Electricity for speakers and monitors normally comes from wall outlets (the power mains), but some use batteries or specialised amplifiers.
Do high end speakers make a difference?****
More expensive speakers frequently use materials and design advancements that could significantly alter the sound.
Can low voltage damage speakers?****
No, you can’t permanently harm your speakers by underpowering them, but the signal may be distorted if you don’t supply the speakers with the right amount of power.
How long do powered speakers last?****
High-quality speakers typically survive up to 40–50 years before displaying any indications of degradation, depending on the materials they are composed of and the climatic conditions where the equipment is utilised.
What happens if you put too much power in a speaker?****
The voice coil of the speaker it is connected to may become damaged if an amplifier is forced into clipping (distortion) by being asked to produce more power than it is able to deliver.