SAMSUNG WMN-B30FBXY Full Motion Slim Wall Mount User Guide
- June 11, 2024
- Samsung
Table of Contents
SAMSUNG WMN-B30FBXY Full Motion Slim Wall Mount
Product Information
Specifications
- Model: BN68-11941H-03
- Dimensions: 19.5mm x 32mm
- Components included: A, B, C, D, E, F, G, H
- Hardware: M8x26, M8x42, M5x65
Product Usage Instructions
Pre-Installation
Before installing the wall mount, ensure to connect the power cable or OC cable to the TV.
Wall Mount Installation
- Ensure that component B~C is turned at least three and a half revolutions and tightened securely.
- Use the supplied tool to tighten the component securely.
Installation on Different Wall Types
- Refer to the standard installation conditions for each wall type provided in a separate sheet.
- If the wall is not concrete, seek professional assistance before installation.
- For drywall installation, ensure proper reinforcement is used. A standard stud distance of 16 inches is supported.
- When fixing the wall mount on wood, drill 3mm holes before attaching screws.
Frequently Asked Questions
Q: What are the supported wall types for installation?
A: Concrete, Brick, Drywall, and Wood are supported wall types. Refer to the provided installation conditions for each type.
Q: What should I do if my wall is not concrete?
A: Contact a professional for assistance if your wall is not made of concrete to ensure proper installation.
Q: Can I install the wall mount on drywall without reinforcement?
A: It is not recommended to fix the wall mount to drywall without any reinforcement. Proper support is crucial for stability.
PARTS
CONNECTIONS
Before installing the wall mount, connect the power cable or OC cable to the TV.
INSTALLATION INSTRUCTION
- Ensure that component B~C is turned at least three and a half revolutions and tightened securely.
- Ensure that component D is turned at least three and a half revolutions and tightened securely.
- Use the supplied tool F to tighten the component securely.
- Ensure that component C is turned at least three and a half revolutions and tightened securely.
- Ensure that component D is turned at least three and a half revolutions and tightened securely.
- Use the supplied tool F to tighten the component securely.
- Concrete, Brick
- DRYWALL
- Install by referring to the standard installation conditions for each wall type (which is provided in a separate sheet).
- If the wall is not made of concrete, make sure to contact a professional for assistance.
- Do not fix it to drywall without any reinforcement.
- A standard stud distance is supported. (16”)
- To fix the wall mount on wood, drill holes (3 mm) before attaching the screws.
- To remove the OC cable from 43” to 75” models that use an OC cable, first remove the TV from the wall mount.
- To connect a cable to the USB2.0 port on 43” to 55” models that use an OC cable, first, remove the TV from the wall mount.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>