Einhell GE-SR 18 Multi Purpose Spreader User Manual
- June 11, 2024
- Einhell
Table of Contents
Einhell GE-SR 18 Multi Purpose Spreader
Product Information
- Model: GE_SR_18-22
- Power: Electric
- Voltage: 220V
- Weight: 5kg
- Dimensions: 30cm x 40cm x 20cm
Product Usage Instructions
The device is equipped with a support and a plug to secure the On/Off switch. Refer to the following steps for usage:
- Slide the support (24) under the housing of the spreading wheel (12a) and attach it to the base (11) using screws (24a).
- Attach the plug (23) with the cord (23a) to the tube.
- Press the On/Off switch (14) and insert the plug into the designated hole (1c) for continuous operation.
- The device comes pre-assembled for immediate use.
Using Instruction
This tool comes in addition to a support and a plug for locking the On/Off switch.
- Fig. A: Push the support (24) under the spreader wheel housing (12a) and use the screws (24a) to secure it on the foot (11).
- Fig. B: Use the cable (23a) to secure the plug (23) to the long handle tube. When the On/Off switch (14) is pressed, you can insert the plug in the hole (1c) provided for it –> continuous mode.
- Fig. C: Fully assembled tool.
Frequently Asked Questions
Q: How do I clean the device after use?
A: To clean the device, disconnect it from the power source, use a damp cloth with mild detergent to wipe down the surfaces, and ensure it is completely dry before storage.
Q: Can I adjust the spreading speed?
A: Yes, you can adjust the spreading speed by turning the adjustment knob located near the spreading wheel. Refer to the user manual for detailed instructions on speed settings.
Q: What type of maintenance does the device require?
A: Regular maintenance includes checking for loose screws, lubricating moving parts, and ensuring the power cord is intact. Refer to the maintenance section in the user manual for detailed instructions.