HAVIT H2002G 2.4GHz Wireless Gaming Headset Instruction Manual
- October 30, 2023
- havit
Table of Contents
HAVIT H2002G 2.4GHz Wireless Gaming Headset
Product Information
The H2002G is a wireless gaming headset with a 2.4G transmitter and a Type-C interface. It features a microphone switch, a 7.1 switch, and a light switch for customizable settings. The headset can be used in wired or wireless mode. It has a low power mode and a power off mode for battery conservation. The headset can be charged and updated through the Type-C interface.
Product Usage Instructions
- Headset On Pairing Use: Insert the 2.4G transmitter into the USB data port of your device. Long press the power switch button on the headset for about 5 seconds until you hear a drop sound. The headset is now turned on and in pairing mode (the LOGO light is on by default). After successful pairing, the transmitter’s indicator light will always be on.
- Music Playback: Once the headset is paired successfully, open your preferred music player on your computer to play music.
- Microphone: The headset has an external microphone that is not removable. It also has a microphone switch. Press the microphone switch to turn off the microphone (transmitter light will also turn off). Press it again to turn on the microphone (transmitter light will turn on).
- 7.1 Switch: Press the 7.1 key to turn on the 7.1 function (two beeps will sound). Press it again to turn off the 7.1 function (one beep will sound).
- Light Switch: The lights are on by default when the headset is turned on. Short press the light button to switch between Colorful Streaming mode, Colorful Steady mode, and LED OFF.
- Shutdown: Long press the power switch button for 5 seconds to turn off the headset. After shutdown, the LOGO light and indicator lights will turn off, and the transmitter light will resume continuous flashing.
- Power Status: The headset has a low power mode and a power off mode to conserve battery. The low power mode will beep once every minute when the battery power supply voltage is less than 3.35V. After 20 minutes, the headset will turn off. The power off mode will turn off the headset when the battery power supply voltage is less than 3.3V or when there is no sound source connection.
- Wired Mode: Insert the distribution audio cable into the headset to enter wired mode. In this mode, the microphone can still be used.
Warnings
- Charge the headphone with input power below 3.0V to protect the battery.
- Store or use the headphone in a normal temperature environment and keep it away from heat sources.
- Do not jam the ports of the headphone.
- Protect your hearing and extend the headphone service life by following instructions.
Earplugs Specification
- Speaker : Φ53 mm
- Impedance: 64±15%Ω
- Sensitivity: 113±3dB
- Frequency response: 20hz to 20khz
- Microphone : Ø6.0×2.7mm
- Microphone sensitivity: -42±3dB
- Wireless distance : 10m
- Wireless technology : 2.4GHz
- lithium battery : 1200mAh
- Continuity Play: 30H(No backlight),20H(brightest backlight)
Function Show Image
Operation Guide
Headset on pairing use
- Insert the 2.4G transmitter (hereinafter referred to as the transmitter) into the device USB data port, and the transmitter enters the search pairing state after insertion (the transmitter indicator light flashes continuously).
- Long press the power switch button on the headset for about 5 seconds, then the headset will have a “drop” sound, the headset can be turned on normal use (headset on the LOGO light is on by default).
- The headset and the transmitter have been paired at the factory, and the two devices can be automatically connected and used normally after opening the headset. (Note: When the transmitter and headset did not pair, the transmitter into the computer, the transmitter light will continue to flash, then turn on the headset, while long press the microphone on key for 5 seconds, then the headset into the pairing state, the headset blue light flashes rapidly, the headset and the transmitter pairing, the transmitter light will always be on.)
- After the headset and transmitter pairing successfully, the transmitter’s indicator light is always on.
Music Playback
- After the successful pairing of headphones, open the player on top of the computer(test with Kugou player/QQ music player) to play music.
Microphone
- The headset has only one external microphone. (The microphone is not removable)
- The headset has a microphone switch, press the microphone switch, then the headset will have a “drop” a beep, the microphone off while the transmitter light off, press the microphone switch again, then the headset will have a “drop” two beeps, the microphone The microphone will turn on and the transmitter light will be on.
switch
- Short press the 7.1 key, then the headset will have “drop” two beeps, 7.1 function is on, press the 7.1 key again, then the headset will have “drop” one beep, 7.1 function is off.
Light switch
- After the headset is turned on, the lights are on by default, short press the light button to switch the light mode.(Colorful Streaming mode—Colorful Steady mode—LED OFF)
Shutdown
- Long press the power switch button for 5 seconds after the headset shutdown, shutdown after the headset LOGO light and indicator lights off, the transmitter light to resume continuous flashing state.
Power Status
- Low Power Mode:When the battery power supply voltage is less than 3.35V, the sound will beep one times every one minute. After 20 minutes, the headset will turn off.
- Power off mode:when the battery power supply voltage is less than 3.3V or when there is no sound source connectionthe,the headset will turn off.
- You can use the TYPE-C cable for headset charging at the same time can also be used as a data cable, connected to the computer that is online update headset program.
Wired mode
- After the headset is inserted into the distribution audio cable, it will automatically shut down, the headset enters the wired mode, the wired mode microphone can be used
Warnings
- Please follow the instruction to operate
- PLS charge the headphone with input power below 3.0V, in order to protect the battery;
- Please store or use the headphone in a normal temperature environment.
- PLS keep the headphone from heat source, such as radiators, hot air regulators, stoves, or other heat generating instruments. As it is not anti-high temperature.
- Don’t jam the ports of the headphone, such as charger port, LED port and microphone etc..
- In order to protect your hearing and extend the headphone service life, it is not recommended to adjust the volume to the maximum level for a long time.
- Whatever reasons damage the headphone, please feel free to contact our after-sales staff in time rather than repair by yourself. Otherwise, you will accept without after-sales service.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>