HILTI ST 200022 Cordless Jackhammer Instruction Manual
- June 11, 2024
- HILTI
Table of Contents
- HILTI ST 200022 Cordless Jackhammer
- Product Information
- Product Usage Instructions
- FAQs
- Original operating instructions
- Safety
- Description
- Technical data
- Preparations at the workplace
- Operation
- Care and maintenance
- Transport and storage
- Troubleshooting
- Declaration
- BATTERY INDICATOR
- CONTACT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HILTI ST 200022 Cordless Jackhammer
Product Information
- Specifications
- Model: ST 200022
- Description
- The ST 200022 is a multi-language user manual that provides operating instructions in various languages.
- Features
- Multi-language support
- Original operating instructions
- User-friendly design
Product Usage Instructions
- Selecting Language
- To select your preferred language, locate the corresponding section in the manual using the index provided.
- Reading Instructions
- Once you have selected your language, read through the operating instructions carefully to understand how to use the product effectively.
- Troubleshooting
- If you encounter any issues while using the product, refer to the troubleshooting section in the manual for solutions.
- Maintenance
- Follow the maintenance guidelines provided in the manual to ensure the product functions optimally for an extended period.
FAQs
- Q: How do I change the language on the device?
- A: The language selection is available in the manual index. Refer to the corresponding page number for instructions.
- Q: What should I do if the product stops working?
- A: Check the troubleshooting section in the manual for possible solutions. If the issue persists, contact customer support.
- Q: How often should I perform maintenance on the product?
- A: Follow the maintenance schedule outlined in the manual to keep the product in good working condition.
Original operating instructions
Information about the operating instructions
- About these operating instructions
- Warning! Read and understand all accompanying documentation, including but not limited to instructions, safety warnings, illustrations, and specifications provided with this product. Familiarize yourself with all the instructions, safety warnings, illustrations, specifications, components, and functions of the product before use. Failure to do so may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.
- The accompanying documentation corresponds to the current state of the art at the time of printing. Please always check for the latest version on the product’s page on Hilti’s website. To do this, follow the link or scan the QR code in this documentation, marked with the symbol.
- Ensure that these operating instructions are with the product when it is given to other persons.
Explanation of symbols
- Warnings: Warnings alert persons to hazards that occur when handling or using the product. The following signal words are used:
- DANGER! Draws attention to imminent danger that will lead to serious personal injury or fatality.
- WARNING: Draws attention to a potential threat of danger that can lead to serious injury or fatality.
- CAUTION! Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the equipment or other property.
Symbols in the operating instructions
The following symbols are used in these operating instructions:
Symbols in illustrations
The following symbols are used in illustrations:
Product-dependent symbols
General symbols Symbols used about the product
Product information
HILTI products are designed for professional users and only trained, authorized personnel are permitted to operate, service and maintain the products. This personnel must be specifically informed about the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used not per the intended use. The type designation and serial number are printed on the rating plate. Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Metal construction screwdriver | ST 200022 |
---|---|
Generation | 02 |
Serial no. |
Declaration of conformity
- The manufacturer declares, on his sole responsibility, that the product described here complies with the applicable legislation and standards. A copy of the declaration of conformity can be found at the end of this documentation.
- The technical documentation is filed here:
- Hilti Entwicklungsgesellschaft mbH
- Tool Certification
- Hiltistrasse 6
- D-86916 Kaufering, Germany
Safety
General power tool safety warnings
WARNING Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future reference. The term
“power tool” in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
Work area safety
- Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
- Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
- Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
- When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
- If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. The use of an RCD reduces the risk of electric shock.
Personal safety
- Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
- Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.
- Do not let familiarity gained from the frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
Power tool use and care
- Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- Do not use the power tool if the switch does not turn on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
- Use the power tool, accessories tool bits etc. by these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
- Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
Battery tool use and care
- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
- When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
- Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130° C (265 °F) may cause explosion.
- Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
Service
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
- Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Safety warnings for screwdrivers and impact wrenches
- Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring.
- Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Additional safety instructions for torquing threaded fasteners Personal safety
- Use the product and accessories only when they are in perfect working order.
- Never tamper with or modify the product or accessories in any way.
- Use auxiliary handles supplied with the product. Loss of control can cause personal injury.
- Hold the product securely with the grips provided. If possible, use both hands to hold the product securely. Keep the grips clean and dry.
- Avoid touching rotating parts – the risk of injury!
- Wear suitable eye protection, a hard hat, ear protection, and light respiratory protection while the product is in use.
- Wear protective gloves when changing the accessory tool. Touching the accessory tool can result in cuts and burns.
- Wear eye protection. Flying fragments present a risk of injury to the body and eyes.
- Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some examples are lead or lead-based paints; brick, concrete and other masonry products, natural stone and other products containing silicates; certain types of wood, such as oak, beech and chemically treated wood; asbestos or materials that contain asbestos. Determine the exposure of the operator and bystanders employing the hazard classification of the materials to be worked. Implement the necessary measures to restrict exposure to a safe level, for example by the use of a dust collection system or by the wearing of suitable respiratory protection. The general measures for reducing exposure include:
- working in an area that is well-ventilated,
- avoidance of prolonged contact with dust,
- directing dust away from the face and body,
- wearing protective clothing and washing exposed areas of the skin with water and soap.
- Take frequent breaks and do physical exercises to improve the blood circulation in your fingers. High vibration during long periods of work can lead to disorders of the blood vessels and nervous system in the fingers, hands and wrists.
Electrical safety
- Before beginning work, check the working area for concealed electric cables or gas and water pipes.
- External metal parts of the product could give you an electric shock or cause an explosion if you accidentally damage an electric cable or a gas or water pipe.
Power tool use and care
- Switch the product off immediately if the accessory tool jams. The product might twist off-line.
- Wait until the product stops completely before you lay it down.
Additional safety instructions
- Use the product and accessories only when they are in perfect working order.
- Never tamper with or modify the product or accessories in any way.
- Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed accessories are secure.
- Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some examples are lead or lead-based paints; brick, concrete and other masonry products, natural stone and other products containing silicates; certain types of wood, such as oak, beech and chemically treated wood; asbestos or materials that contain asbestos. Determine the exposure of the operator and bystanders utilizing the hazard classification of the materials to be worked. Implement the necessary measures to restrict exposure to a safe level, for example by the use of a dust collection system or by the wearing of suitable respiratory protection. The general measures for reducing exposure include:
- working in an area that is well-ventilated,
- avoidance of prolonged contact with dust,
- directing dust away from the face and body,
- wearing protective clothing and washing exposed areas of the skin with water and soap.
- Do not look directly into the light source (LEDs) incorporated in the power tool and do not direct the light at other persons’ faces.
- Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
- Always hold the tool securely by the grip. The drill/driver can suddenly rotate around its axis while torquing is in progress
Careful handling and use of batteries
- Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
- Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
- Use only batteries that are in perfect working order.
- Treat batteries with care to avoid damage and prevent leakage of fluids that are extremely harmful to health!
- Do not under any circumstances modify or tamper with batteries!
- Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C (176 °F).
- Never use or charge a battery that has suffered an impact or been damaged in any other way. Check your batteries regularly for signs of damage.
- Never use recycled or repaired batteries.
- Never use the battery or a battery-operated power tool as a striking tool.
- Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This can lead to explosions.
- Do not touch the battery poles with your fingers, tools, jewellery, or other electrically conductive objects. This can damage the battery and also cause material damage and personal injury.
- Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits, electric shock, burns, fire and explosions.
- Use only chargers and power tools approved for the specific battery type. Read and follow the relevant operating instructions.
- Do not use or store the battery in explosive environments.
- If the battery is too hot to touch, it may be defective. Put the battery in a place where it is visible and where there is no risk of fire, at an adequate distance from flammable materials.
- Allow the battery to cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the document entitled “Instructions on safety and use for Hilti Li-ion batteries”.
- Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
- Read the instructions on the safety and use of Hilti Li-ion batteries that you can access by scanning the QR code at the end of these operating instructions.
Description
Product Overview 1
- Tool holder
- Interface to depth gauge (ST-DG) and screw guide (ST-SG)
- Torque adjustment
- Interface to the stand-up tool (SDT)
- Air intake
- Grip
- Air discharge
- Lockbutton
- Installation opening for accessories
- Battery
- Battery status indicator
- Battery release button
- Work-area light
- Control switch
- Forward/reverse switch/transport lock
- Depth gauge adjustment (optional)
- Depth gauge (optional)
Intended use
- The product described is a hand-held cordless screwdriver for fastening profile metal sheets, metal sheets and sandwich panels in metal construction.
- For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance, Hilti recommends the batteries stated in the table at the end of these operating instructions for this product.
- For these batteries, use only Hilti chargers of the type series stated in the table at the end of these operating instructions.
Overloading and overheating protection
- The product is protected against overloading and overheating by an automatic cut-out. After overheating, when the control switch is pressed to restart the product there may be a delay before the product restarts.
Items supplied
- Metal construction screwdriver, depth gauge, bit holder, belt hook, operating instructions Other system products approved for use with this product can be found at your local Hilti Store or at: www.hilti.group.
Status indicators of the Li-ion battery
- Hilti Nuron Li-ion batteries can indicate the state of charge, fault messages and the battery’s state of health.
Indicators for the state of charge and fault messages
- WARNING Risk of injury by a falling battery!
- If the release button is pressed with a battery inserted in the product, subsequently check that the battery is correctly re-engaged and secure.
- Short-press the release button of the battery to get whichever of the following status indications is applicable at the time.
- State of charge and, if applicable, faults are indicated constantly as long as the connected product is switched on.
Status | Meaning |
---|---|
Four (4) LEDs show constantly green | State of charge: 100 % to 71 % |
Three (3) LEDs show constantly green | State of charge: 70 % to 51 % |
Two (2) LEDs show constantly green | State of charge: 50 % to 26 % |
One (1) LED shows constantly green | State of charge: 25 % to 10 % |
One (1) LED slow-flashes green | State of charge: < 10 % |
One (1) LED quick-flashes green | The Li-ion battery is completely discharged. |
Recharge the battery. If the LED again starts quick-flashing after the battery
has been charged, consult Hilti Service.
One (1) LED quick-flashes yellow| The Li-ion battery or the product in which
it is inserted is overloaded, too hot or too cold, or experiencing some other
fault. Bring the product and the battery to the recommended working
temperature and do not overload the product when it is in use. If the message
persists, consult Hilti Service.
One (1) LED shows yellow| The Li-ion battery and the product in which it is
inserted are not compatible. Consult Hilti Service.
One (1) LED quick-flashes red| The Li-ion battery is locked and cannot be
used. Consult Hilti Service.
Indicators showing the battery’s state of health
To check the battery’s state of health, press the release button and hold it
down for longer than three seconds. The system does not detect a potential
malfunction of the battery due to misuse, for example, battery dropped or
pierced, external heat damage, etc.
Status | Meaning |
---|---|
All LEDs show in sequence, followed by one (1) LED showing constantly green. |
The battery can remain in use.
All LEDs show in sequence, followed by one (1) LED quick-flashing yellow.| The
check to ascertain the battery’s state of health was not complete. Repeat the
procedure, or consult Hilti Service.
All LEDs show in sequence, followed by one (1) LED showing constantly red.| If
a connected product can still be used, the remaining battery capacity is below
50 %. If a connected product can no longer be used, the battery has reached
the end of its useful life and has to be replaced. Consult Hilti Service.
Technical data
Product information
Rated voltage | 21.6 VDC |
---|---|
Rated speed under no load | 0 /min … 2,000 /min |
Weight per EPTA-Procedure 01, without battery | 1.4 kg |
Torque | 12.5 Nm |
--- | --- |
Tool holder | 1/4″ Innensechskant mit Sicherungsmanschette |
Ambient temperature for operation | −17 ℃ … 60 ℃ |
Storage temperature | −20 ℃ … 70 ℃ |
Battery
Battery operating voltage | 21.6 V |
---|---|
Weight, battery | See the end of these operating instructions |
Ambient temperature for operation | −17 ℃ … 60 ℃ |
Storage temperature | −20 ℃ … 40 ℃ |
Battery charging starting temperature | −10 ℃ … 45 ℃ |
Noise information and vibration values by EN 62841
- The sound pressure and vibration values given in these instructions were measured by a standardized test and can be used to compare one power tool with another. They can also be used for a preliminary assessment of exposure.
- The data given represent the main applications of the power tool. However, if the power tool is used for different applications, with different accessory tools, or is poorly maintained, the data can vary. This can significantly increase exposure over the total working period.
- An accurate estimation of exposure should also take into account the times when the power tool is switched off, or when it is running but not being used for a job. This can significantly reduce exposure over the total working period.
- Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for example: maintaining the power tool and accessory tools, keeping the hands warm, and organization of work patterns.
Noise information
Sound (power) level (L WA) | 84 dB(A) |
---|---|
Sound pressure level (LpA) | 73 dB(A) |
Uncertainty (noise values) (LpA und LWA) | 5 dB(A) |
Total vibration
Screwdriving (an) | B 2255 | 0.7 m/s² |
---|---|---|
B 22255 | 0.5 m/s² | |
Uncertainty (total vibration) | 1.5 m/s² |
Preparations at the workplace
WARNING: Risk of injury by inadvertent starting!
- Before inserting the battery, make sure that the product is switched off.
- Remove the battery before making any adjustments to the power tool or before changing accessories.
- Observe the safety instructions and warnings in this documentation and on the product.
Charging the battery
- Before charging the battery, read the operating instructions for the charger.
- Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
- Use an approved charger to charge the battery.
Inserting the battery
WARNING Risk of injury by short circuit or falling battery!
- Before inserting the battery, make sure that the contacts on the battery and the contacts on the product are free of foreign matter.
- Make sure that the battery always engages correctly.
- Charge the battery fully before using it for the first time.
- Push the battery into the product until it engages with an audible click.
- Check that the battery is seated securely.
Removing the battery
- Press the battery release button.
- Remove the battery from the product.
Fitting/removing the depth gauge (optional) 2
- When driving screws with a sealing washer, use a depth gauge suitable for the diameter of the sealing washer (accessory). When the depth gauge is correctly adjusted the screw seal will be correctly compressed.
- The depth gauge is attached to the metal construction screwdriver by way of a snap-on connection and can be simply pulled off or pushed on.
- Fit the depth gauge.
Setting forward or reverse rotation 3
- An interlock prevents switching while the motor is running.
- The control switch is locked when the forward/reverse switch is in the middle position (switch-on interlock).
- Set the forward/reverse switch to the desired direction of rotation.
Fitting/removing belt hook (optional) 4
The belt hook enables you to attach suitable power tools to your belt. It can be fitted to allow attachment on the left or right side of the body.
CAUTION Risk of injury by falling power tools!
Check that the belt hook is fitted securely before beginning work.
- Insert the belt hook into the installation opening for accessories.
- Secure the belt hook with the screws provided.
- Check that the belt hook is secure.
- To remove the belt hook, remove the screws and pull the belt hook out of the installation slot for accessories.
Fall arrest
- WARNING Risk of injury by falling tool and/or accessory!
- Use only the Hilti tool tether recommended for your product.
- Before each use, always check the attachment point of the tool tether for possible damage.
- Do not secure a tool tether to the belt hook. Do not use a belt hook to lift the product.
- Comply with the national regulations for working at heights.
As a drop arrester for this product, use only a combination of the Hilti retaining strap #2293133 and the Hilti tool tether #2261970.
- Secure the retaining strap to the installation openings for accessories. Check that it holds securely.
- Secure one carabiner of the tool tether to the retaining strap and secure the second carabiner to a load-bearing structure. Check that both carabiners hold securely.
- Comply with the operating instructions of the Hilti retaining strap and those of the Hilti tool tether.
Setting the torque 5
- Set the desired torque.
Operation
- Observe the safety instructions and warnings in this documentation and on the product.
Switching on
- The metal construction screwdriver starts running as soon as it is pressed lightly against the working surface.
- The running speed can be controlled smoothly right up to maximum speed by varying how far the control switch is pressed in.
- Switch the tool on.
Switching on in sustained operating mode 6
- The lockbutton can be pressed in while the control switch is pressed. The metal construction screwdriver then runs in sustained operating mode.
- The lockbutton makes the tool less tiring to use as the control switch does not have to be constantly pressed.
- Switch on in sustained operating mode.
Switching off after sustained operation 7
- To be able to switch off from sustained operating mode quickly at any time, keep your hand close to the control switch. Pressing the control switch again causes the lockbutton to jump back into its original position.
- Switch off after sustained operation.
Removing screws
- Remove the depth gauge or screw guide, if fitted. Set the forward / reverse switch to the “Reverse” position.
- Remove the screws.
Care and maintenance
- WARNING Risk of injury with battery inserted!
- Always remove the battery before carrying out care and maintenance tasks!
Care of the product
- Carefully remove stubborn dirt.
- Carefully clean the air vents, if present, with a dry, soft brush.
- Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone as these can attack the plastic parts.
- Use a dry, clean cloth to clean the contacts of the product.
Care of the Li-ion batteries
- Never use a battery with clogged air vents. Clean the air vents carefully using a dry, soft brush.
- Avoid unnecessary exposure of the battery to dust and dirt. Never expose the battery to high levels of moisture (e.g. by being dipped in water or left in the rain).
- If a battery has been soaked by moisture, treat it as a damaged battery. Isolate it in a non-flammable container and consult Hilti Service.
- Keep the battery free of extraneous oil and grease. Do not permit dust or dirt to accumulate unnecessarily on the battery. Clean the battery with a dry, soft brush or a clean, dry cloth. Do not use cleaning agents containing silicone as these can attack the plastic parts. Do not touch the contacts of the battery and do not remove the factory-applied grease from the contacts.
- Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone as these can attack the plastic parts.
Maintenance
- WARNING
- The danger of electric shock! Improper repairs to electrical components may lead to serious injuries including burns.
- Repairs to the electrical section of the tool or appliance may be carried out only by trained electrical specialists.
- Check all visible parts and controls for signs of damage at regular intervals and make sure that they all function correctly.
- Do not use the product if signs of damage are found or if parts malfunction. Immediately have the product repaired by Hilti Service.
- After cleaning and maintenance, install all guards and protective devices and check that they are in full working order.
To help ensure safe and reliable operation, use only genuine Hilti spare parts, consumables and accessories. Spare parts, consumables and accessories approved by Hilti for use with your product can be found at your Hilti Store or online at: www.hilti.group.
Transport and storage
Transport of cordless power tools and batteries
CAUTION Accidental starting during transport!
- Always transport your products with the batteries removed!
- Remove the battery/batteries.
- Never transport batteries loose and unprotected.
- During transport, batteries should be protected from excessive shock and vibration and isolated from any conductive materials or other batteries that may come in contact with the terminals and cause a short circuit. Comply with the locally applicable regulations for transporting batteries.
- Do not send batteries through the mail. Consult your shipper for instructions on how to ship undamaged batteries.
- Before each use and before and after prolonged transport, check the product and the batteries for damage.
Storage of cordless power tools and batteries
- WARNING Accidental damage caused by defective or leaking batteries!
- Always store your products with the batteries removed!
- Store the product and the batteries in a cool and dry place. Comply with the temperature limits stated in the technical data.
- Do not store batteries on the charger. Always remove the battery from the charger when the charging operation has completed.
- Never leave batteries in direct sunlight, on sources of heat, or behind glass.
- Store the product and batteries where they cannot be accessed by children or unauthorized persons.
- Before each use and before and after prolonged storage, check the product and the batteries for damage.
Troubleshooting
- If a problem occurs, always observe the status indicator of the battery. See the section headed Status indicators of the Li-ion battery.
- If the trouble you are experiencing is not listed in this table or you are unable to rectify the problem by yourself, contact Hilti Service.
Trouble or fault | Possible cause | Action to be taken |
---|---|---|
LEDs of the battery show nothing | Battery defective | ▶ Contact Hilti Service. |
The metal construction screwdriver doesn’t start. | The battery is not fully | |
inserted. | ▶ | Push the battery in until it engages with an audible click. |
The battery is discharged. | ▶ | Charge the battery. |
Electrical fault. | ▶ Switch the metal construction screwdriver off |
immediately, remove the battery, keep it
under observation, allow it to cool down and contact Hilti Service.
The control switch can’t be pressed, i.e. the switch is locked.| The
forward/reverse switch is in the middle position.| ▶| Push the forward /
reverse switch to the left or right.
The battery is not heard to engage.| The retaining lugs on the battery are
dirty.| ▶| Clean the retaining lugs and push the battery in until it engages.
Contact Hilti Service if the problem persists.
The speed of rotation drops considerably.| The battery is discharged.| ▶|
Charge the battery.
The metal construction screwdriver or battery gets very hot.| Electrical
fault.| ▶ Switch the metal construction screwdriver off immediately,
remove the battery, keep it under observation, allow it to cool down and contact Hilti Service.
The screw is pressed too tightly against the surface.| The depth gauge is set
incorrectly.| ▶| Turn the depth gauge to the right.
The screw is not pressed tightly enough against the surface.| The depth gauge
is set incorrectly.| ▶| Turn the depth gauge to the left.
The screwdriver runs but the screw can’t be driven.| The wrong direction of
rotation is set.| ▶ Set the forward/reverse switch to the desired direction of
rotation.
Declaration
- EC Declaration of Conformity
- UK Declaration of Conformity
BATTERY INDICATOR
CONTACT
- Hilti Corporation
- LI-9494 Schaan
- Tel.: +423 234 21 11
- Fax: +423 234 29 65
- www.hilti.group.
- Hilti = registered trademark of Hilti Corp., Schaan
- Pos. 1 20231122