ANKER DG-WF-H WLAN Dongle User Guide
- June 11, 2024
- Anker
Table of Contents
ANKER DG-WF-H WLAN Dongle
About Product
The WLAN Dongle (model: DG-WF-H) is a smart communication expansion module
that works with Anker SOLIX X1 series products. It enables inter-device
connection and cloud communication using WLAN.
Communication Networking
- The WLAN Dongle allows for the connection of the Anker SOLIX X1 Power Module (model: X1-P6K-US, X1-P6K-S) to the router.
- When cascading multiple power modules (up to six), only one WLAN Dongle should be used for networking.
- The power module that has the WLAN Dongle installed is the master module in the network, with all other power modules acting as slave modules. Through cascading, slave modules are able to communicate with the WLAN Dongle.
- Ensure the wireless network is undisturbed and that the signal strength is normal.
Installation
- Insert the WLAN Dongle into the Wi-Fi port on the power module with the LED indicator facing away from you. Ensure that the arrow on the WLAN Dongle aligns with the notch of the Wi-Fi port.
- Rotate the head of the WLAN Dongle clockwise to tighten it.
To unlock and take out the WLAN Dongle, rotate the head of the WLAN Dongle counterclockwise.
Commissioning
- Power on the Anker SOLIX X1 Power Module.
- Download the Anker Pros app from the App Store (iOS devices) or Google Play (Android devices).
- Log into the app using the installer’s account.
- Follow the in-app instructions to complete commissioning.
Specifications
Specifications are subject to change without notice.
Customer Service
support@anker.com
(UK) +44 (0) 1604 936 200
(DE) +49 (0) 69 9579 7960
+49 (800) 000 2522 (Anker SOLIX)
Important Safety Instructions
- Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature.
- Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments.
- The suitable temperature for this device is -40°F to 158°F / -40°C to 70°C.
- It is recommended to supply the device in an environment with a temperature that ranges from – 41°F to 77°F / 5°C to 25°C.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure conditions. The min separation
distance is 20cm.
Notice : Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
Declaration of Conformity
This product complies with the radio interference requirements of the
European Community.
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit the Web site:
https://support.anker.com/s/articleRecommend?
otherType=Anker_EN_Extemal_Manual_and_Download&secondType=doc
RF Exposure Information
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of d=20 cm between the device and the human body. To maintain
compliance with RF exposure requirements, use products that maintain a 20cm
distance between the device and human body.
Frequency bands and power are as below:
Function Bands Operation Frequency Max.Power
Wi-Fi 2.4GHz 2412-2472MHz EIRP ＜ 20
dBm
BT 2.4GHz 2402-2480 MHz EIRP ＜
10 dBm
The following importer is the responsible party (contract for EU matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich,
Germany
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health,
and the environment. For more information on the disposal and recycling of
this product, contact your local municipality, disposal service, or the shop
where you bought this product.
Anker Innovations Limited I Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, HongKong
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>