V150 Luzdeairbag Autel Portugal Instruction Manual

V150 Luzdeairbag Autel Portugal

Specifications:

• Manufacturer: Autel
• Contact for Support: pro.autel.com / www.autel.com / 1-855-288-3587/1-855-AUTELUS (North America) / 0086-755-86147779 (China) / Support@autel.com
• Safety Warnings: Follow all safety messages and instructions in the manual

Product Usage Instructions

Important Safety Information: Before operating the unit, carefully read the manual paying special attention to safety warnings and precautions provided.

Safety Information: For your safety and the safety of others, it is crucial to understand and follow the safety instructions presented in the manual. Always refer to and follow safety messages and test procedures provided by the manufacturer of the vehicle or equipment being tested.

Safety Messages: Safety messages are crucial to prevent personal injury and equipment damage. Messages are categorized as DANGER (imminent hazard) or WARNING (potentially hazardous).

Safety Instructions: Be aware of potential hazards not covered in the manual. Ensure a well-ventilated work area when working with an operating engine to prevent carbon monoxide exposure.

Safety Warnings:

• Perform automotive testing in a safe environment
• Wear ANSI standard safety eye protection
• Avoid contact with moving or hot engine parts
• Operate the vehicle in a well-ventilated area
• Securely engage parking brake and use blocks for drive wheels
• Follow service manual diagnostic procedures
• Ensure a fully charged vehicle battery and clean DLC connection

FAQ

Q: Can I operate the device without following the safety instructions? A: It is strongly advised to always follow the safety instructions to prevent personal injury, equipment damage, or potential hazards.

Q: What should I do if I encounter a situation not covered in the manual? A: Prioritize personal safety and evaluate the situation carefully. Seek assistance if unsure about handling the situation safely.

Q: How do I ensure the device’s accuracy during testing? A: Make sure to follow all diagnostic procedures, maintain a well-ventilated workspace, and ensure proper battery charge and clean DLC connection to avoid false data generation.

Trademarks
Autel®, MaxiSys®, MaxiDAS®, MaxiScan®, MaxiTPMS®, MaxiRecorder®, and MaxiCheck® are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders.

Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of Autel.

Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no guarantee is given for the completeness and correctness of the contents, including but not limited to the product specifications, functions, and illustrations.
Autel will not be liable for any direct, special, incidental, indirect damages or any economic consequential damages (including the loss of profits).

IMPORTANT
Before operating or maintaining this unit, please read this manual carefully, paying extra attention to the safety warnings and precautions.

For Services and Support

• pro.autel.com
• www.autel.com
• 1-855-288-3587/1-855-AUTELUS (North America) 0086-755-86147779 (China)
• Support@autel.com
• For technical assistance in all other markets, please contact your local selling agent.

Safety Information

• For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the device.
• There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of the person doing the work. Because of the vast number of test applications and variations in the products that can be tested with this equipment, we cannot possibly anticipate or provide advice or safety messages to cover every circumstance. It is the automotive technician’s responsibility to be knowledgeable of the system being tested. It is crucial to use proper service methods and test procedures. It is essential to perform tests in an appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area, the device being used, or the vehicle being tested.
• Before using the device, always refer to and follow the safety messages and applicable test procedures provided by the manufacturer of the vehicle or equipment being tested. Use the device only as described in this manual. Read, understand, and follow all safety messages and instructions in this manual.

Safety Messages

Safety messages are provided to help prevent personal injury and equipment damage. All safety messages are introduced by a signal word indicating the hazard level.

DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders.

WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders.

The safety messages herein cover situations Autel is aware of. Autel cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety.

DANGER
When an engine is operating, keep the service area WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system. Engines produce carbon monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to serious personal injury or loss of life.

SAFETY WARNINGS

• Always perform automotive testing in a safe environment.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
• Operate the vehicle in a well ventilated work area, for exhaust gases are poisonous.
• Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake is engaged.
• Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
• Be extra cautious when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
• Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
• Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
• Keep the test equipment dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
• Do not drive the vehicle and operate the test equipment at the same time. Any distraction may cause an accident.
• Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.
• To avoid damaging the test equipment or generating false data, make sure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure.
• Do not place the test equipment on the distributor of the vehicle. Strong electro-magnetic interference can damage the equipment.

Using This Manual

This manual contains device usage instructions.
Some illustrations shown in this manual may contain modules and optional equipment that are not included in your system. Contact your sales representative for availability of other modules and optional tools or accessories.

Conventions

The following conventions are used.

Bold Text
Bold text is used to highlight selectable items such as buttons and menu options.

Example:

Tap OK.

Notes and Important Messages

Notes
A NOTE provides helpful information such as additional explanations, tips, and comments.

Example:

NOTE
New batteries reach full capacity after approximately 3 to 5 charging and discharging cycles.

Important

IMPORTANT indicates a situation which, if not avoided, may result in damage to the test equipment or vehicle.

Example:

IMPORTANT
Keep the cable away from heat, oil, sharp edges and moving parts. Replace damaged cables immediately.

Hyperlink
Hyperlinks, or links, that take you to other related articles, procedures, and illustrations are available in electronic documents. Blue italic text indicates a selectable hyperlink and blue underlined text indicates a website link or an email address link.

Illustrations
Illustrations used in this manual are samples, the actual testing screen may vary for each vehicle being tested. Observe the menu titles and on-screen instructions to make correct option selection.

Quick Reference Guide

Email: sales@autel.com
Web: www.autel.com

MaxiDAS DS900-TS MaxiVCI V150

Thank you for purchasing this Autel tool. Our tools are manufactured to a high standard and — when used ac-cording to these instructions and properly maintained — will provide years of trouble-free performance.

Getting Started

IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully, paying extra attention to the safety warnings and precautions. Failure to use this product properly may cause damage and/or personal injury and will void the product warranty.

Technical Specifications

Table 2-1 Specifications

Please download the Maxi PC Suite software from www.autel.com >Support> Downloads >Autel Update Tools and install it on your computer.

Software Update

IMPORTANT: Make sure the tablet is connected to the Internet and has sufficient battery or is connected to a power source.

• Tap the Update application button from the Diagnostics Job Menu and the Update screen will display.
• Check for all available updates:
• a) if you want to update all the items, tap the Update All button;
• b) if you want to update one or some of the items, tap the Update button on the right column of the specific items).
• Tap Pause to suspend the updating process. Tap Continue to resume.
• When the updating process is completed, the software will be installed automatically. The previous version will be replaced.

Wireless Data Printing

Print via PC
IMPORTANT: Make sure the tablet is connected to the same network as the computer, either via Wi-Fi or LAN, and that the computer is connected to a printer.

1. Run the MaxiSys Printer on the computer. This was installed along with the installation of the Maxi PC Suite software.
2. Click Test Print to make sure the printer is working property.
3. Tap Print on the toolbar of the tablet. A temporary document will be created and sent to the computer.
   If the Auto Print option in the MaxiSys Printer is selected, the MaxiSys Printer will print the received document automatically.
   If the Auto Print option is not selected, click Open PDF File to view all the temporary files. Select the file(s) you want to print and click Print.

Print via APP
If a Wi-Fi printer is available, please purchase a Wi-Fi printer APP and install it onto your tablet. To print a file, simply click on
the Print button of a saved file on the tablet.
For service and support, please contact us.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
   Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device complies with Industry Canada licence-exempt RSS standard( s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.”

http://pro.autel.com/ www.autel.com/support@autel.com
0086-755-2267-2493 (China HQ) / 1-855-AUTEL-US (288-3587) (North America) / 0049 (0) 6103-2000520 (Europe) /
+045 5948465 (APAC) / +971 585 002709 (IMEA)
© Autel Intelligent Technology Corp., Ltd. All Rights Reserved.

References

• Home | AUTEL
• pro.autel.com
• pro.autel.com/
• Home | AUTEL
• Home | AUTEL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>