BYTECH AUBE176 True Wireless Earbuds User Manual

: June 10, 2024
: Bytech

Table of Contents

BYTECH AUBE176 True Wireless Earbuds
SPECIFICATIONS
PACKAGE CONTENTS
PAIRING
TOUCH CONTROL
USAGE
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BYTECH AUBE176 True Wireless Earbuds

True Wireless Earbuds

SPECIFICATIONS

Charging Time: Up to 1.5 hours
Charging Interface: Type C
Talk/Music Time: Up to 4 Hours (dependent on volume level)
Standby Time: Up to 150 Hours
Transmission Range: Up to 33 feet

PACKAGE CONTENTS

Charging case
2 Wireless Bluetooth® headsets
USB Type-C charge cable
Manual

PAIRING

Once fully charged open the cover of the charge case. The indicator lights on both earbuds will flash. Wait until one of them stops flashing.
Once only one earbud’s indicator light is flashing you may now search for BY-BE-176 on your device’s Bluetooth® list and pair it.
You can now listen to music or make a call.
Once you have successfully paired your earbuds to your device the first time as described above you only need to remove them from the charge case and they should connect automatically to your phone if your Bluetooth® is turned on.
If you encounter any issues you can always unpair them from your device and begin this process again.

TOUCH CONTROL

TAP: Play/Pause/Answer call /End cell
TAP: CC Vol+/Vol-
ТАР: Enable Siri/Goaled
- LONG PRESS 1-2 seconds: Prev/Next/Reject Call
- LONG PRESS 3-5 seconds: Power On/Off

USAGE

Phone call:
When connected to a device capable of making and receiving phone calls you can short press either earbud button to answer an incoming call.
Listening to music:
When the earbuds are turned on and connected to the phone or Bluetooth® enabled device you can open the player and listen to music.
In the process of listening to music, press the button once to pause the current music, and again to play paused music.
Using Siri or Google Assistant:
On either earbud, tap the control surface three times, in quick succession, to activate your Al assistant. The Al assistant on your device must be activated prior to this operation.
Power off:
Long press the control surface to turn the earbuds off. Each one needs to be powered off individually. Or you can just place the earbuds into the charge case and they will automatically power off.

CHARGING

Replace the earbuds in the case.
Connect the Type C USB charging cable to the charging port on the back of the case.
Plug the cable into a standard UsB 5V/1A or higher power output.
The indicator lights on the front of the case will begin to flash. This means the case battery is being charged. While this is happening the lights on the buds inside the case glow solid red, which indicates they are being charged.
If you want to charge the earbuds from the charge case internal battery, simply place them back in the charge case, they will glow red to indicate charging.

PLEASE NOTE

Do not abuse this product, and do not squeeze it between heavy objects.
Keep this product far away from high temperature and humidity.
Keep this product away from high frequency transmitter equipment, this will affect the local signal reception, resulting in sound breakup and distortion or disconnection. If for any reason you move out of the range of the device you are listening to while using this product, the earbuds will disconnect. When you are back in rande vou may
When fully charged the case LED will glow solid and the earbud LEDs will shut off. Unplug the charging cable from the power source.
If you want to charge the earbuds from the charge case internal battery, simply place them back in the charge case, they will glow red to indicate charging. need to perform the pairing procedure again as this depends on battery life. If the earbuds are powered on and are disconnected from a Bluetooth® device for more than 3 minutes they will power off.

FCC ID: 2AHN6-AUBE176 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.