Shark RV700_N ION Robot Vacuum User Manual
- June 8, 2024
- Shark
Table of Contents
- Shark RV700_N ION Robot Vacuum User Manual
- STEP 1: SET UP YOUR CHARGING DOCK
- STEP 2: INSTALL THE SIDE BRUSHES
- STEP 3: POWER-UP SHARK ION ROBOT
- STEP 4: PREP YOUR HOME FOR CLEANING
- STEP 5: SET YOUR ROBOT’S CLEANING SCHEDULE
- USING YOUR SHARK ION™ ROBOT NEAR STAIRS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shark RV700_N ION Robot Vacuum User Manual
QUICK START GUIDE
SHARK ION ROBOT
EASE OF A ROBOT. PERFORMANCE OF A SHARK.™
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your robot.
CONGRATULATIONS ON YOUR NEW SHARK ION ROBOT
Getting Started is Easy – Follow These Simple Steps To Get Cleaning
STEP 1: SET UP YOUR CHARGING DOCK
Place charging dock on a level surface with its back against a wall, in a space without obstructions, that can easily be accessed by your Shark ION Robot. Plug dock into a power outlet.
NOTE : Placing your dock in a central location with a wide view to your home will improve your robot’s ability to return to the dock.
STEP 2: INSTALL THE SIDE BRUSHES
Snap the 2 included side brushes onto the posts on the bottom of the robot.
STEP 3: POWER-UP SHARK ION ROBOT
Flip the Power switch located on the side of your Shark ION Robot to the ON
position and place your robot on the dock.
When all 3 indicator lights are solid blue, your robot is fully charged.
Simply press the Clean button to send your robot into action.
STEP 4: PREP YOUR HOME FOR CLEANING
With Smart Sensor technology, your robot maneuvers around obstructions and
navigates its way out of tight spaces as it cleans. To help your robot
complete its mission, prep your floor by removing all obstacles, such as loose
power cords, clothes, toys, and low-hanging drapes.
Use the included BotBoundary™ strips to easily block off obstacles or areas
you don’t want your robot to enter.
See the BOTBOUNDARY USAGE GUIDE included with your BotBoundary strips for more
information.
See the TIPS AND TRICKS FOR GREAT PERFORMANCE GUIDE to discover how to get the
best from your robot.
STEP 5: SET YOUR ROBOT’S CLEANING SCHEDULE
Use the included remote to set a recurring cleaning schedule for your robot. Simple instructions are located on the back of your remote and in your Owner’s Guide.
USING YOUR SHARK ION™ ROBOT NEAR STAIRS
For your robot’s cliff sensors to work properly, all runners, rugs, or carpets
must be at least 4 inches from the top of any stairs (or extend over the edge
of the stairs.)
If a runner, rug, or carpet edge is less than 4 inches from the stairs and
can’t be moved, use a BotBoundary™ strip to block off the stairs.
For assistance, contact us at
800-798-7398 or visit us online at
sharkclean.com
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your
unit.
Don’t forget to register your robot at
registeryourshark.com
©2018 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. BOTBOUNDARY, EASE OF A ROBOT. PERFORMANCE OF A SHARK, and SHARK ION are trademarks of SharkNinja Operating LLC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>