B2 Audio DVPE28 Subwoofers Owner’s Manual
- June 10, 2024
- B2 AUDIO
Table of Contents
B2 Audio DVPE28 Subwoofers
Product Usage Instructions
Installation
- Choose a suitable location in your vehicle for installing the subwoofer.
- Ensure the enclosure fits securely in the chosen location and does not obstruct any vehicle functions.
- Connect the subwoofer to your audio system following the provided wiring diagram.
Settings Adjustment
- Adjust the volume and frequency settings on your audio system to optimize the subwoofer performance.
- Tune the box to the recommended frequency range for the best sound quality.
Maintenance
- Regularly check the connections and ensure the subwoofer is free from any obstructions or damage.
- Clean the subwoofer and enclosure as needed to maintain optimal performance.
FAQ
Frequently Asked Questions
- Q: What is the recommended power output for this subwoofer?
- A: The subwoofer has a max power of 800 Watts and an RMS power of 400 Watts, ensuring optimal performance within these power ranges.
- Q: How do I tune the box for the best sound quality?
- A: The recommended box tuning frequency is 40 Hz. Adjusting the port area and type can also impact the sound output, so experiment with different settings to find the ideal configuration for your preferences.
Specifications
More Info
- chassis diameter: 2 x 8”
- sensitivity: 90 db
- max power: 800 w
- frequency response: 35 hz~500 hz
- 4 layer Dual voice coil: 1.5”/ 38.1 mm
Enclosure Specifications
- Dimensions: 850x295x(375) mm
- Volume: 55.6 L / 1.936 cu.ft
- Box Tuning: 40 Hz
- Port Area: 159 cm /5.6”
- Port Type: J – Shaped L+ R
Subwoofer Specification
- Diameter: 2 x 8”
- Max Power: 800 Watts
- RMS Power: 400 Watts
- Impedance: 2 + 2 Ohm
- Frequency Response: 35 Hz~500 Hz
- Sensitivity (1w/1m): 90 dB
- Voice Coil Diameter: 1.5” / 38.1 mm
- Cone: Non Pressed Paper
- Magnet: 30 Oz x 2
ENCLOSURE DIMENSIONS
WIRING OPTIONS
PARALLEL = 1Ω (STEREO 2 +2 OHM)
- WIRING IN PARALLEL REQUIRES ALL POSITIVE LEADS ARE RAN TOGETHER TO THE AMPLIFIERS POSITIVE SPEAKER TERMINAL.
- THE SAME GOES FOR THE NEGATIVE LEADS, THESE WILL CONNECT TO THE NEGATIVE SPEAKER TERMINAL ON THE AMPLIFIER.
- IF YOU HAVE A MULTICHANNEL AMPLIFIER, YOU CAN ALSO USE A STEREO CONNECTION AND HAVE A LOAD OF 2 OHM PER CHANNEL
SERIAL = 4Ω
More Information
- WWW.B2AUDIO.COM
- WWW.FACEBOOK.COM/B2AUDIO
- INSTAGRAM: @B2AUDIOGRAM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>