WalkingPad Treadmill User Manual
- June 8, 2024
- KingSmith
Table of Contents
- Welcome
- 01. Product and Accessories
- 02. Function Diagram
- 03. Initial Operating Guide
- 04. Learn to Use the Treadmill
- 05. Trademark and Legal Notice
- 06. Safety Instruction
- 06. Safety Instruction
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Welcome
Thank you for choosing KINGSMITH WalkingPad Treadmill, and hereinafter
referred to as “Treadmill”. The
exquisite, simple and innovative design enable you to enjoy your quality and
enjoyable workout at home. This
Treadmill is designed for family use only. Please do not use it for any
business, lease or public group purpose.
01. Product and Accessories
Please check if the items inside the packaging box are complete and intact. In case of any missing or breakage, please contact us by email support@walkingpad.com
02. Function Diagram
1. Walking Mode
2.Running Mode
3. Display Panel Function Introduction
4. Remote Control
03. Initial Operating Guide
-
When pushing and pulling, please ensure that the handrail
has shrunk to a minimum and fix the handrail locking and
quick dismounting device. Put it on a flat floor, please don’t
put it on too soft cushion or thick carpet. -
Loose the handrail locking device, lift the
handrail to a vertical angle, and tighten
the handrail locking device. -
Unfold the treadmill, adjust the walking belt to the
center position, slowly unfold it and assist in
pressing it down to make it completely flat, or
rotate the bottom foot cushion for leveling. -
Adjust the handrail quick mounting device to a
suitable height, and then lock the device. Yellow
marks on the handrail sides indicate the
recommended maximum and minimum heights. -
Install safety switch, connect
power supply and turn on. -
Download “KS Fit” APP from Apple
Store or Google Play Store and
complete installation. -
Open APP, follow the prompts to add
and bind the treadmill for use.
04. Learn to Use the Treadmill
1. Mode Description
Standby Mode
The standby mode indicator lights up, the
motor and sensor stop responding.
Manual Mode
The manual mode indicator lights up, control the
speed via remote control or APP.
Automatic Mode
The automatic mode indicator lights up, control the
speed automatically via intelligent algorithm.
2. Standby Mode Control Description
Standby Mode
Under standby mode, users can press the mode button on the
remote control briefly to wake up the treadmill and switch to the
default manual mode state.
Users can also touch the standby icon on the display panel to
wake up the treadmill.
When the treadmill is not running, press the mode button on the
remote control or touch the standby icon on the display panel to
switch to the standby mode.
Remote Control Legend
Short press: Mode switch
Long press: Switch to standby mode (non-operational state )
3. Manual Mode Control Description(primary mode)
Manual Mode
In this mode, users can use the remote control to control the treadmill.
Beginners are advised
to use the manual mode first, and then use the automatic mode after being
skilled in using it.
Mode Button
Short press: Mode switch
Long press: Switch to standby mode (non-operational state)
4. Automatic Control Mode Description(progressive mode)
Automatic
This mode is an progressive mode, which is difficult to control
and can be used completely without the remote control. It is
advised to use the mode after proficiency.
Use the remote control to start and stop, and the mode switch
button is effective under this mode
Note: The automatic control mode can only available under
walking mode.
5. Remote Control Paring Instructions
If the remote control does not respond or you have replaced the
remote control, you need to re-pair.
Pairing method: Restart the machine and press the mode button
on the remote control for 5 seconds.
6. Connection Caution Light
Not connected to APP:Flicker
Connected to APP:Off
7. Fault Caution Light
E01: Software overcurrent E08: Sensor fault
E02: Hardware overcurrent E09: Motor unable to start
E03: IPM Module Overheating E12: Motor overcurrent
E04: Low-voltage Protection protection
E05: Overvoltage Protection E13: Overloading protection
E06: Motor phase loss protection E14: Hall signal loss
E07: Motor block rotation protection E15: Communication fault
05. Trademark and Legal Notice
The patents involved in Kingsmith WalkingPad Treadmill
series products are made by Beijing Kingsmith
Technology
Co., Ltd. and owned by the Company. No organization or
individual may copy, distribute all or any part of this manual
without Kingsmith’s written permission, and may not use
these patents without authorization.
When printing this manual, we have put various functional
descriptions and instructions in it as far as possible.
However, due to the continuous improvement of product
functions and design changes, there may still be discrepancies
with the products you purchased. Due to product
update, this manual may deviate from the actual product in
terms of color, appearance, etc. Please refer to the actual
product.
06. Safety Instruction
The
space distance behind the treadmill
should be kept above 2000 mm. In case of
emergency, you can hold the handrail
tightly with both hands and support your
body to jump off the treadmill.
The
distance between the two
sides of the treadmill should
be kept above 500mm.
Do not
wear loose or dangling clothing
while using the treadmill, you should
wear sports shoes and clothes.
Please exercise according to your own
situation. If you feel uncomfortable
during the workout, please stop
immediately and consult a doctor.
Otherwise, you may be at risk of injury.
Read,
understand, and test the emergency stop
procedures before use. When using, please
clamp the other end of the safe lock on clothes.
If there is an unexpected situation, pull off the
safety lock to stop the treadmill immediately.
Start to use the treadmill.
Noisy level is 65dB(A).
The treadmill has an emergency stop mechanism for your safety. Before starting
your training, attach
the safety key to your clothing. If the treadmill was switched off due to the
safety key being pulled out,
insert it again. The continuous belt does not start up again automatically.
Uncontrolled use of the treadmill by a third party can be avoided by taking
the safety key off and
storing it in a secure place.
In an emergency, hold the handrails tightly with both hands and step off of
the belt onto the side
surfaces of the side platforms. Activate the emergency stop mechanism (safety
disconnect).
06. Safety Instruction
07. Manutenzione
1. Clean the treadmill
-
Disconnect all power before servicing the treadmill.
-
Add a little mild detergent to the 100% cotton cloth. Do not spray the detergent directly
on the walking belt or use acidic and corrosive detergent. -
Do not wipe under the walking belt
-
After a period of exercise, dust and stains may appear on the rear floor. This is normal
and just wipe.
2. Walking Belt Slipping and Correction
-
Start the treadmill and run at a speed of 3 km/h.
-
Walking belt to the left: Turn the left adjusting hole screw clockwise by 1/4 turn.
-
Walking belt to the right: Turn the right adjusting hole screw clockwise by 1/4 turn.
-
Walking belt slipping: Turn the left and right adjusting screws clockwise for 1/2 turn
at the same time. -
After each adjustment, it needs to run for a period of time (1-2 minutes) to observe
the correction. Please adjust again if necessary.
3. Walking belt lubrication
-
Power off the treadmill and unplug the power cord
-
Lift the edge of the walking belt and smear the inner surface with silicone oil.
-
Start the treadmill to run at a speed of 3km/h for 10-20 seconds.
-
5-10ml of silicone oil is required for one lubrication. Excessive application may cause
slipping and affect normal use. -
Lubricate your walking belt every three months.
Read More About This Manual & Download PDF:
WalkingPad Treadmill User Manual – Optimized PDF
WalkingPad Treadmill User Manual – Original PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>