KINGSMITH ETD3A-E Height Adjustable Desk User Manual

KINGSMITH ETD3A-E Height Adjustable Desk

Welcome
Thank you for choosing our product, the height-adjustable desk. Its simple yet innovative design is sure to enhance your work-from-home experience.

Tech Specs

• Area coverage 1007 × 570 mm
• Lifting height 700 ~ 1200 mm (excluding desk board and leg pads)
• Lifting speed 20 mm/s (unloaded)
• Max load 100 kg (static)
• Rated voltage 100 ~ 240 VAC
• Drive system Dual motors (inverted double wishbone)
• Net weight 27 kg

Product and Accessories

Please check if the items inside the packaging box are complete and intact. In case of any missing or breakage, please contact saler.

Accessories

Installation Instructions

1. Turn over the desk legs
   Place ‘ 3 ‘ horizontally, invert “ 1 ” and put them on both sides. Use “ 9 ” M6 Wrench, install 8 pcs of’ ‘ 0 ‘ to fix.
   Tips: When install the screw, fix it first, then tighten it.

2. Install electrical covers
   lnvert “ 5 “.
   Use “ 9 ” M6 Wrench to install and fix 4 pcs of “ 0 “.
   Tips: When install the screw, fix it first, then tighten it.

3. Install legs and leg pads
   Invert ‘ 2 ‘. Invert ‘ 11 ‘ and tighten it with ‘2’ . Use “9” M6 Wrench to install and fix 8 pcs of’ 0 •.
   Tips: When install the screw, fix it first, then tighten it.

4. Install the connecting racks of desk board
   Rotate the product 180°, put ‘4’.
   Use “9” M6 Wrench to install and fix 4 pcs of “7”.
   Tips: When install the screw, fix it first, then tighten it.

5. Connect the electrical switch
   Put ’12’ and ’13’ into the power cable box.
   And connect the wires of “14” and “15” shown in the picture. Use “10” to fix.

6. Install the standard desk board
   Rotate the product 180° and put it on the desk board. Use ‘9’ M4 Wrench to install and fix 2 pcs of “8”.
   Tips: When install the screw, fix it first, then tighten it.

7. Complete the installation
   Rotate the desk and steadily put it upright.

Function Introduction

1. How to pair the remote controller
   Memory Function: When the desk lifts or drops to the ideal place, press M first, then press the memory number keys. Use the memory function: Press the memory number keys, and the desk will reach the preset height.

2. Overheat protection and treatment method
   In order to make this product keep long-term, effective use, there has been added overheat protection function. If the desk is lifted and dropped frequently, ‘hot” will be shown there. Take off the power cord and and repower it 2 minutes later, then the desk will work normally.

3. Obstacle protection
   When the desk encounters obstacle while being lifted or dropped, it will move oppositely to avoid damaging your belongings or body. It is recommended to check if the desk has encountered any obstacles when the obstacle protection feature is activated, and then move the obstacles accordingly.

4. Common faults
   If the E21 and El 1 appear, it means “1” and “13” are not plugged normally.

Safety Guidelines

Manufacturer: Beijing Kingsmith Technology Co., Ltd.
Address: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>