Homedics Shiatsu AntiGravity Recliner Manual AG-3002

Asiento reclinable AntiGravity

ASIENTO RECLINABLE DE LUJO CON
MECANISMO DE MASAJE MÓVIL

TWO YEAR LIMITED WARRANTY
(Valid in USA only)

HoMedics sells its products with the intent that they are free of defects in manufacture
and workmanship for a period of two years from the date of original purchase, except
as noted below. HoMedics warrants that its products will be free of defects in material
and workmanship under normal use and service. This warranty extends only to consumers
and does not extend to Retailers.
To obtain warranty service on your HoMedics product, mail the product and your
dated sales receipt (as proof of purchase), postpaid, to the following address:
HoMedics Consumer Relations
Service Center Dept. 168
3000 Pontiac Trail
Commerce Township, MI 48390
No COD’s will be accepted.
HoMedics does not authorize anyone, including, but not limited to, Retailers, the subsequent
consumer purchaser of the product from a Retailer or remote purchasers, to
obligate HoMedics in any way beyond the terms set forth herein. This warranty does
not cover damage caused by misuse or abuse; accident; the attachment of any unauthorized
accessory; alteration to the product; improper installation; unauthorized
repairs or modifications; improper use of electrical/power supply; loss of power;
dropped product; malfunction or damage of an operating part from failure to provide
manufacturer’s recommended maintenance; transportation damage; theft; neglect;
vandalism; or environmental conditions; loss of use during the period the product is
at a repair facility or otherwise awaiting parts or repair; or any other conditions whatsoever
that are beyond the control of HoMedics.
This warranty is effective only if the product is purchased and operated in the country
in which the product is purchased. A product that requires modifications or adoption
to enable it to operate in any other country than the country for which it was
designed, manufactured, approved and/or authorized, or repair of products damaged
by these modifications is not covered under this warranty.
THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY.
THERE SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS OR ANY
OTHER OBLIGATION ON THE PART OF THE COMPANY WITH RESPECT TO PRODUCTS
COVERED BY THIS WARRANTY. HOMEDICS SHALL HAVE NO LIABILITY FOR
ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL
THIS WARRANTY REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY
PART OR PARTS WHICH ARE FOUND TO BE DEFECTIVE WITHIN THE EFFECTIVE
PERIOD OF THE WARRANTY. NO REFUNDS WILL BE GIVEN. IF REPLACEMENT
PARTS FOR DEFECTIVE MATERIALS ARE NOT AVAILABLE, HOMEDICS RESERVES
THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF REPAIR OR
REPLACEMENT.
This warranty does not extend to the purchase of opened, used, repaired, repackaged
and/or resealed products, including but not limited to sale of such products on
Internet auction sites and/or sales of such products by surplus or bulk resellers. Any
and all warranties or guarantees shall immediately cease and terminate as to any
products or parts thereof which are repaired, replaced, altered, or modified, without
the prior express and written consent of HoMedics.
This warranty provides you with specific legal rights. You may have additional rights
which may vary from country to country. Because of individual country regulations,
some of the above limitations and exclusions may not apply to you.
For more information regarding our product line in the USA,
please visit: www.homedics.com

Mail To: HoMedics Service Center Dept. 168
3000 Pontiac Trail Commerce Township, MI 48390
Email: cservice@homedics.com

IMPORTANT SAFEGUARDS

WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN
CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING
DANGER- TO REDUCE THE RISK OF ELECTROCUTION:

• ALWAYS unplug the appliance from the electrical outlet immediately after using and
  before cleaning.

• DO NOT reach for an appliance that has fallen into water. Unplug it immediately.

• DO NOT use while bathing or showering.

WARNING – TO REDUCE THE RISK OF BURNS,
ELECTROCUTION, FIRE OR INJURY TO PERSONS

• An appliance should NEVER be left unattended when plugged in. Unplug from outlet
  when not in use and before putting on or taking off parts or attachments

• Close supervision is necessary when this appliance is used by, on or near children,
  invalids or disabled persons.

• Use this appliance only for its intended use as described in this manual. DO NOT use
  attachments not recommended by HoMedics; specifically any attachments not
  provided with the unit

• NEVER operate this appliance if it has a damaged cord or plug, if it is not working
  properly, if it has been dropped or damaged, or dropped into water. Return it to
  HoMedics Service Center for examination and repair

• NEVER use pins or other metallic fasteners with this appliance.

• Keep cord away from heated surfaces

• NEVER use while sleeping or fall asleep while using the massager.

• NEVER drop or insert any object into any opening.

• DO NOT operate where aerosol (spray) products are being used or where oxygen is
  being administered. 2

• DO NOT carry this appliance by supply cord or use cord as handle.

• To disconnect, turn all controls to the “OFF” position, then remove
  plug from outlet.

• This appliance is designed for household use only.

• This appliance is designed for personal, non-professional use only.
  This appliance should be used only for personal, non-professional
  uses.

Caution : All servicing of this massager must be performed
by authorized HoMedics service personnel only

SAVE THESE INSTRUCTIONS
Caution—Please read all instructions carefully
before operating.

• If you have any concerns regarding your health consult your
  doctor before using this product.

• Individuals with pacemakers should consult a doctor before use.

• NEVER leave the appliance unattended, especially if children are
  present.

• NEVER cover the appliance when it is in operation.

• DO NOT use this product for more than 15 minutes at a time.

• Extensive use could lead to the products excessive heating and
  shorter life. Should this occur, discontinue use and allow the unit
  to cool before operating.

• NEVER use this product directly on swollen or inflamed areas or
  skin eruptions.

• This product is a non-professional appliance designed to provide
  soothing massage to worn muscles. DO NOT use this product as
  a substitute for medical attention.

• DO NOT use this product before bed. The massage has a
  stimulating effect and can delay sleep.

• This product should NEVER be used by any individual suffering
  from any physical ailment that would limit the user’s capacity to
  operate the controls.

• This product should never be used by any individual suffering
  from any ailments that would limit or altogether inhibit the user’s
  capacity to feel or have any sensation in the body part that the
  product is being used on.

• This unit should not be used by children or invalids without adult
  supervision.

Components
Carefully remove all contents from packaging and inspect the product
to make sure all components of the chair have been received. These should include:

• Left armrest A
• Right armrest with control panel B
• Front cross bar C
• Bottom cross bar D
• Back frame with attached cushion and massage mechanism E
• Seat frame with attached cushion F
• Large bolts and bolt sleeves for crossbars (8) G
• Washers and Caps/Nuts (8) H
• Small Allen wrenches I
• Optional softening pad J
• Detachable headrest K
• AC adaptor L
  See Figure 1.

Easy to Follow Guide to Chair Assembly
1. Assemble Chair Base

• Attach the front cross bar C to left armrest A by lining up the labeled “1” on the cross bar with the “1” on
  the left armrest. Secure with the provided large bolts and bolt sleeves G using the allen wrench I . Attach the
  bottom cross bar D to the left armrest ensuring the labeled “3” on the crossbar lines up with the “3” on the
  armrest. Secure with the provided large bolts and bolt sleeves using the allen wrench.
  DO NOT FULLY TIGHTEN BOLTS AT THIS POINT. See Figure 2.

• Attach right armrest B to cross bars C D making sure to line up the labeled “2” and “4” on the cross bars
  with the “2” and “4” on the armrest. Secure with large bolts and bolt sleeves using the allen wrench.
  See Figure 3.

• Tighten all bolts, ensuring the base sits level without wobbling.

NOTE: ASSEMBLE BASE ON ITS SIDE.

2. Attach Seat Cushion/Frame to Base

• Align the seat with pre-attached bolts. From the bottom side add washer and caps/nuts to secure the
  Seat frame to the base. See Figure 4.

• Use the provided allen wrench to tighten partially.

NOTE: IT MAY BE EASIER TO TURN THE BASE ON ITS SIDE TO INSERT THE BOLTS.

3. Attach Back Cushion/Frame to Base

• Align the back with the pre-attached bolts to the frame. From the back side, add washer and caps/nuts to secure to
  Back frame to Chair Base. See Figure 5.

• Attached correctly, the back frame will form a concave shape and fabric stitching should face up. See Figure 6.

• Tighten all caps/nuts using the allen wrench.

4. Connect Power Source

• Locate the output jack behind the AntiGravity chair in the lower right corner of the back cushion. The input jack
  will also be found behind the AntiGravity chair on the right side of the seat cushion. See Figure 7. Firmly insert
  the output jack into the input jack to connect the massage mechanism with the control panel.

• To attach the softening pad J align the loop strip located on the softening pad strap to the hook strip on
  the back of the chair cushion to secure into place. See Figure 8.

• To attach the headrest K to the back cushion, align the loop strip on the strap of the headrest with the
  hook strip on the softening pad or back of the chair cushion to secure in place. See Figure 9.

• Ensure the AC power adaptor cord and extends through the back of the frame. Be sure the AC adaptor
  cord is not twisted or crimped between the mat and the metal frame.

Instructions for Shiatsu AntiGravity Recliner Use

Your Shiatsu AntiGravity recliner is designed to provide relaxation in a variety of positions utilizing the easylock
levers on each side of the armrests. The ideal position for optimum relaxation is one in which the feet are
above the heart. This position will reduce pressure on the spine and help relieve muscle tension.
NOTE: The Shiatsu AntiGravity recliner design has a weight limit of 300 pounds. Persons exceeding this
body weight should not use this recliner.

• Before sitting in the Shiatsu AntiGravity recliner, be sure it is in the complete upright position by pushing the
  levers forward toward the footrest.

• Sit in the chair and lean back slowly. Sitting all the way back in the seat will make it easier to recline. To
  adjust the angle of the chair, hold on to the armrests and lean back or forward until you reach the desired
  position. Lock the position into place by pulling the levers back.

• The AnitGravity recliner’s ergonomic design ensures proper spine alignment in any of its reclining positions.

• The footrest may be raised by pulling it upward. Each position will sound with a click. To lower the footrest,
  raise it until it stops and then push it back towards the floor.

• Before getting out of the AntiGravity recliner, be sure to return it to its full upright position and lock into place
  by pulling the easy-lock levers back.

• Stand up using the armrests for support.

Tip: To help you recline, unlock the levers and slowly raise your hands above your head and lean back. Lock
in your desired position by pulling the levers back. To sit upright, unlock the levers and move hands slowly
towards your knees while leaning slightly forward. This will bring the recliner back to its full upright position.

Power Adaptor Instructions

Connect the adaptor jack to the massage chair power receptacle located along the right side of
the chair. Once inserted, plug the other end into an AC power outlet. Use only the AC power
adaptor provided with this unit.

AC Power Adaptor Information
Your massage chair is powered by an attached custom AC home adaptor. Use only the supplied
AC home adaptor as other similar-looking adaptors may cause irreparable damage to the unit
and will void your warranty.

Massage Chair and Control Panel Instructions
Press the POWER button once to activate the control panel. The LED indicator will illuminate.
To deactivate, press again. For complete instructions, please see pages 8-9.
NOTE: The intensity of the massage will change with the angle of the chair back. Generally,
the more the chair is reclined, the more intense the massage will be. You can adjust the
chair angle to suit your personal comfort level. You may also soften the massage force by
placing a towel between yourself and the unit.
Caution: Do not jam or force any part of your body in the moving
massage mechanism.

Automatic Shut Off
The Shiatsu AntiGravity recliner has been designed for convenience and safety. As a special
precaution against falling asleep while using the unit, or leaving the unit on while it is still in
operation, we’ve programmed it to automatically stop working after 15 minutes. This special
feature should not be considered as a substitute for OFF. Always remember to turn your unit off
when not in use.

Shiatsu AntiGravity Recliner™
LUXURY RECL INER WI TH
MOV ING MAS SAGE MECHANI SM

Maintenance
To Store: Avoid contact with sharp edges or pointed objects which might
damage/puncture the fabric.
To Clean: Disconnect massage cushion from power source before cleaning.
The massage cushion and control panel may be cleaned with a soft, damp
cloth only.

• The massage cushion is not machine washable and must not come into
  contact with water or any other liquids.

• Do not immerse into liquids to clean.

• Never use abrasive cleaners, brushes, gasoline, kerosene, polish or paint
  thinner to clean.

• Do not attempt to repair your AntiGravity recliner. There are no user serviceable
  parts. For service, send the unit to the HoMedics service address listed in the
  warranty section.

Frame: Periodically, the frame should be checked to ensure the screws are tight.
If the frame is found to be loose, tighten screws with the tools provided.
The AntiGravity recliner and massage cushion are designed for indoor
applications only. Use of this product for outdoor applications may cause
irreparable damage and void your warranty.

Back Cushion/Frame Removal
for Warranty Service
If you experience a problem with the massage mechanism located in the back
frame/cushion of the Shiatsu AntiGravity Recliner within a two year period, send
this component to the HoMedics Service Center for repair as noted in the
warranty on page 12.
To disassemble the back cushion/frame, first disconnect the power source
located behind the chair at the back cushion base and seat cushion. See figure
7 on page 6 for an illustration. Now completely unscrew the bolts located along
the base of the back cushion to detach from the chair. See figure 5 on page 5.
Once removed, please see the warranty on page 12 for further instruction.

Do not use the chair or connect it to a power source
while disassembled.

Shiatsu AntiGravityRecliner
LUXURY RECL INER WI TH
MOV ING MAS SAGE MECHANI SM

NOTE: Color of fabric and chair components may differ from colors shown above

Read More About This Manual & Download PDF:

Homedics Shiatsu AntiGravity Recliner Manual AG-3002 – Optimized PDF
Homedics Shiatsu AntiGravity Recliner Manual AG-3002 – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>